Enjoyed this channel? Join my Locals community for exclusive content at
jobshopusa.locals.com!
Featured
Featured
Tinning Shell for Babbitt Pour
Tinning the shell of a Babbitt bearing is not always a must, but when it is called for you will have to do just that. I share my process on tinning a cast iron shell that uses a thin thickness of Babbitt as the bearing. Just like the 5-inch bearing we re-poured last week this 6-inch bearing is for a marine shaft. One other difference between sizes is this run in an oil bath versus the other being a grease lubrication.
https://turnwrightmachineworks.com/
https://jobshopusa.locals.com/post/5318282/jobshopusa
https://mewe.com/keithfenner.52/posts
https://rumble.com/c/KeithFenner
Made in China is a warning!
Vote MAGA 2024 #TRUMP Make America great again!
3
views
1
comment
Tinning Shell for Babbitt Pour
Tinning the shell of a Babbitt bearing is not always a must, but when it is called for you will have to do just that. I share my process on tinning a cast iron shell that uses a thin thickness of Babbitt as the bearing. Just like the 5-inch bearing we re-poured last week this 6-inch bearing is for a marine shaft. One other difference between sizes is this run in an oil bath versus the other being a grease lubrication.
https://turnwrightmachineworks.com/
https://jobshopusa.locals.com/post/5318282/jobshopusa
https://mewe.com/keithfenner.52/posts
https://rumble.com/c/KeithFenner
Made in China is a warning!
Vote MAGA 2024 #TRUMP Make America great again!
87
views
1
comment
Tinning Shell for Babbitt Pour
Tinning the shell of a Babbitt bearing is not always a must, but when it is called for you will have to do just that. I share my process on tinning a cast iron shell that uses a thin thickness of Babbitt as the bearing. Just like the 5-inch bearing we re-poured last week this 6-inch bearing is for a marine shaft. One other difference between sizes is this run in an oil bath versus the other being a grease lubrication.
https://turnwrightmachineworks.com/
https://jobshopusa.locals.com/post/5318282/jobshopusa
https://mewe.com/keithfenner.52/posts
https://rumble.com/c/KeithFenner
Made in China is a warning!
Vote MAGA 2024 #TRUMP Make America great again!
3
views
1
comment
Spline Time Part Two
Pearl’s project is getting back on the making and the first part in the head stock gear box is the second in line shaft we found to be messed up. I hand grind the radius needed on the teeth of the cutter, make a spacer to hold the cutter apart to form the teeth I’m cutting on the spine. I share the method of aligning the spline to the index head for clocking the tooth to the root of the spline, cut in part one.
https://turnwrightmachineworks.com/
https://jobshopusa.locals.com/post/5318282/jobshopusa
https://mewe.com/keithfenner.52/posts
https://rumble.com/c/KeithFennerShow more
413
views
5
comments
Spline Time
Pearl’s project is getting back on the making and the first part in the head stock gear box is the second in line shaft we found to be messed up. I set up the dividing head on the K&T for the spline cutting and start milling the root of the spline areas.
https://turnwrightmachineworks.com/
https://jobshopusa.locals.com/post/5318282/jobshopusa
https://mewe.com/keithfenner.52/posts
https://rumble.com/c/KeithFenner
Made in China is a warning!
Vote MAGA 2024 #TRUMP Make America great again!
316
views
5
comments
Spline Time Part Two
Pearl’s project is getting back on the making and the first part in the head stock gear box is the second in line shaft we found to be messed up. I hand grind the radius needed on the teeth of the cutter, make a spacer to hold the cutter apart to form the teeth I’m cutting on the spine. I share the method of aligning the spline to the index head for clocking the tooth to the root of the spline, cut in part one.
https://turnwrightmachineworks.com/
https://jobshopusa.locals.com/post/5318282/jobshopusa
https://mewe.com/keithfenner.52/posts
https://rumble.com/c/KeithFenner
Made in China is a warning!
Vote MAGA 2024 #TRUMP Make America great again!
12
views
Spline Time
Pearl’s project is getting back on the making and the first part in the head stock gear box is the second in line shaft we found to be messed up. I set up the dividing head on the K&T for the spline cutting and start milling the root of the spline areas.
https://turnwrightmachineworks.com/
https://jobshopusa.locals.com/post/5318282/jobshopusa
https://mewe.com/keithfenner.52/posts
https://rumble.com/c/KeithFenner
Made in China is a warning!
Vote MAGA 2024 #TRUMP Make America great again!
29
views
Babbitt Pour 2024 Part Six
I'm bringing you along on my biggest babbitt pour since I left the shipyards back in 1994. The two bearings are from a work boat and supply support for a five-inch propeller shaft, which was re-machined to new custom diameters.
The Babbitt material is ASTM B-23 Grade 1 Babbitt
Melting point solidus 223C 433F
Melting point Liquidus 371C 700F
Pouring temp 441C 825F
Part Six, I finish up the boring of the two Babbitt bearings and take a good look at the finished bearing bores. I conclude my series with an overview and looking on to the next Project at JOB SHOP USA.
Made in China is a warning!
Vote MAGA 2024 #TRUMP Make America great again!
414
views
3
comments
Babbitt Pour 2024 Part Five
I'm bringing you along on my biggest babbitt pour since I left the shipyards back in 1994. The two bearings are from a work boat and supply support for a five-inch propeller shaft, which was re-machined to new custom diameters.
The Babbitt material is ASTM B-23 Grade 1 Babbitt
Melting point solidus 223C 433F
Melting point Liquidus 371C 700F
Pouring temp 441C 825F
Part Five, I set up the Clausing lathe for line boring process, mounting to the deck of the carriage on the Clausing lathe is similar to setting up an HBM to line bore a pump case. I had lost the audio on three clips as I set up the bar and take the first couple cuts, but found the audio in the background in other location, so I recorded it to dub in, not a total lost…
Made in China is a warning!
Vote MAGA 2024 #TRUMP Make America great again!
476
views
3
comments
Babbitt Pour 2024 Part Four
I'm bringing you along on my biggest babbitt pour since I left the shipyards back in 1994. The two bearings are from a work boat and supply support for a five-inch propeller shaft, which was re-machined to new custom diameters.
The Babbitt material is ASTM B-23 Grade 1 Babbitt
Melting point solidus 223C 433F
Melting point Liquidus 371C 700F
Pouring temp 441C 825F
Part Four, I continue the procedure that worked well on the lower halves, as I pour the upper halves completing the babbitt pouring process needed for the line boring in my next step in my self-aliening bearing project.
Made in China is a warning!
Vote MAGA 2024 #TRUMP Make America great again!
369
views
2
comments
Babbitt Pour 2024 Part Three
I'm bringing you along on my biggest babbitt pour since I left the shipyards back in 1994. The two bearings are from a work boat and supply support for a five-inch propeller shaft, which was re-machined to new custom diameters.
The Babbitt material is ASTM B-23 Grade 1 Babbitt
Melting point solidus 223C 433F
Melting point Liquidus 371C 700F
Pouring temp 441C 825F
Part Three, I got it all figured out and created a good seal on the mandrel rings and have very good results in the lower Bearing shells halves.
Made in China is a warning!
Vote MAGA 2024 #TRUMP Make America great again!
385
views
3
comments
Babbitt Pour 2024
I'm bringing you along on my biggest babbitt pour since I left the shipyards back in 1994. The two bearings are from a work boat and supply support for a five-inch propeller shaft, which was re-machined to new custom diameters.
The Babbitt material is ASTM B-23 Grade 1 Babbitt
Melting point solidus 223C 433F
Melting point Liquidus 371C 700F
Pouring temp 441C 825F
Part One, prepping for the pour, clearing the housings and making sure they mate up fine, creating the molding components and prepping the new Paragon Kiln and firing it up for the first time.
Made in China is a warning label!
Vote MAGA 2024 #TRUMP Make America great again!
1.08K
views
Babbitt Pour 2024 Part Two
I'm bringing you along on my biggest babbitt pour since I left the shipyards back in 1994. The two bearings are from a work boat and supply support for a five-inch propeller shaft, which was re-machined to new custom diameters.
The Babbitt material is ASTM B-23 Grade 1 Babbitt
Melting point solidus 223C 433F
Melting point Liquidus 371C 700F
Pouring temp 441C 825F
Part Two, our first attempt to pour the first lower half is a complete fail , I share the whole fail for a lesson in underestimating the flow of babbitt…
Made in China is a warning!
Vote MAGA 2024 #TRUMP Make America great again!
163
views
1
comment
Babbitt Pour 2024
I'm bringing you along on my biggest babbitt pour since I left the shipyards back in 1994. The two bearings are from a work boat and supply support for a five-inch propeller shaft, which was re-machined to new custom diameters.
The Babbitt material is ASTM B-23 Grade 1 Babbitt
Melting point solidus 223C 433F
Melting point Liquidus 371C 700F
Pouring temp 441C 825F
Part One, prepping for the pour, clearing the housings and making sure they mate up fine, creating the molding components and prepping the new Paragon Kiln and firing it up for the first time.
Made in China is a warning!
Vote MAGA 2024 #TRUMP Make America great again!
25
views
WAZER Reaches New Altitudes
WAZER Reaches New Altitudes
Building my machining career in the shipyards, totally prepared my skill level to take on this aircraft engine mount project! LOL, it’s more like the WAZER pulled me through another quick and clean project with little machining needed. When I purchased my WAZER I had these kinds of jobs in mind and sometimes it’s almost like having a second person in my shop, handling the cutout and I’m off working on another part of the same job or next project at hand.
“Made in China” is a warning label….
Life is good! Cheers, Keith
Wazer's website : http://www.wazer.com
Link to The Peel 2 3D Scanner: https://ultimate3dprintingstore.com/products/peel-2-cad-s-3d-scanner?utm_source=youtube&utm_medium=turnwright
Link to all Peel 3d Scanners: https://ultimate3dprintingstore.com/collections/peel-3d?utm_source=youtube&utm_medium=turnwright
Link to American Rotary: https://www.americanrotary.com/
Hot Sot Ovens: https://barzindustrial.com/hotshot-ovens
https://www.americanrotary.com/product-category/hot-shot-ovens/
303
views
2
comments
Brining Life Back To One Of My Creations Part 2
Yes, you can teach an old dog new tricks and I’m a good example of just that, even if time had past between the original build and the reprograming of my FENNERIZE X-Carve machine. Sure, I have been a conventional machinist/ Jobber most of my career and then dabbled in CNC machines, first the PlasmaCAM then 3D printer, then the X-Carve machine, so found myself wanting and building my own CNC machine. I had some but very little CNC experience in a few businesses that I worked for in my career, but I really count that as zero, just because it was just not anymore than being a machine babysitter. Now I have ventured into my second 3D printing machine and looking into the additive business with real useable materials that pertain to my Job Shop USA.
130
views
1
comment
Brining Life Back To One Of My Creations
Brining Life Back To One Of My Old Creations
Yes, you can teach an old dog new tricks and I’m a good example of just that, even if time had past between the original build and the reprograming of my FENNERIZE X-Carve machine. Sure, I have been a conventional machinist/ Jobber most of my career and then dabbled in CNC machines, first the PlasmaCAM then 3D printer, then the X-Carve machine, so found myself wanting and building my own CNC machine. I had some but very little CNC experience in a few businesses that I worked for in my career, but I really count that as zero, just because it was just not anymore than being a machine babysitter. Now I have ventured into my second 3D printing machine and looking into the additive business with real useable materials that pertain to my Job Shop USA.
“Made in China” is a warning label….
Life is good! Cheers, Keith
https://jobshopusa.locals.com
Wazer's website : http://www.wazer.com
Link to The Peel 2 3D Scanner: https://ultimate3dprintingstore.com/products/peel-2-cad-s-3d-scanner?utm_source=youtube&utm_medium=turnwright
Link to all Peel 3d Scanners: https://ultimate3dprintingstore.com/collections/peel-3d?utm_source=youtube&utm_medium=turnwright
Link to American Rotary: https://www.americanrotary.com/
Hot Sot Ovens: https://barzindustrial.com/hotshot-ovens
https://www.americanrotary.com/product-category/hot-shot-ovens/
168
views
2
comments
Stick Out And No Support
Sometimes the projects you have to set up in the lathe have a lot of sticking out and sometimes you can’t support the load and you have to let it hang out there to do the work. I share my set up and machining of a ductile pipe flange assembly for one of the local municipalities.
“Made in China” is a warning label….
Life is good! Cheers, Keith
Wazer's website : http://www.wazer.com
Link to The Peel 2 3D Scanner: https://ultimate3dprintingstore.com/products/peel-2-cad-s-3d-scanner?utm_source=youtube&utm_medium=turnwright
Link to all Peel 3d Scanners: https://ultimate3dprintingstore.com/collections/peel-3d?utm_source=youtube&utm_medium=turnwright
Link to American Rotary: https://www.americanrotary.com/
Hot Sot Ovens: https://barzindustrial.com/hotshot-ovens
https://www.americanrotary.com/product-category/hot-shot-ovens/
393
views
7
comments
How Broke Is Too Broke? Part 2
How broke is too broke 2 , I finally considered the project at hand an example of deciding when too broke is the final conclusion. I got a replacement tap and then the fun starts again, it was a snap with the second tap and the project continues and the threaded hole becomes a part….
“Made in China” is a warning label….
Life is good! Cheers, Keith
Wazer's website : http://www.wazer.com
Link to The Peel 2 3D Scanner: https://ultimate3dprintingstore.com/products/peel-2-cad-s-3d-scanner?utm_source=youtube&utm_medium=turnwright
Link to all Peel 3d Scanners: https://ultimate3dprintingstore.com/collections/peel-3d?utm_source=youtube&utm_medium=turnwright
Link to American Rotary: https://www.americanrotary.com/
Hot Sot Ovens: https://barzindustrial.com/hotshot-ovens
https://www.americanrotary.com/product-category/hot-shot-ovens/
248
views
2
comments
How Broke Is Too Broke
How broke is too broke , I finally considered the project at hand an example of deciding when too broke is the final conclusion. I ran into two machining failures during this episode. The self-setting ACME nut on my band saw needs replacing a real good example of abstract machining project.
“Made in China” is a warning label….
Life is good! Cheers, Keith
Wazer's website : http://www.wazer.com
Link to The Peel 2 3D Scanner: https://ultimate3dprintingstore.com/products/peel-2-cad-s-3d-scanner?utm_source=youtube&utm_medium=turnwright
Link to all Peel 3d Scanners: https://ultimate3dprintingstore.com/collections/peel-3d?utm_source=youtube&utm_medium=turnwright
Link to American Rotary: https://www.americanrotary.com/
Hot Sot Ovens: https://barzindustrial.com/hotshot-ovens
https://www.americanrotary.com/product-category/hot-shot-ovens/
184
views
7
comments
I'm Going To Level With You!
I’m going to level with you, my B&S surface grinder. I replaced the bearing and belt, now the final part of set up project, is to get it solidly on the ground and level. I bring you along on my progress…
“Made in China” is a warning label….
Life is good! Cheers, Keith
Wazer's website : http://www.wazer.com
Link to The Peel 2 3D Scanner: https://ultimate3dprintingstore.com/products/peel-2-cad-s-3d-scanner?utm_source=youtube&utm_medium=turnwright
Link to all Peel 3d Scanners: https://ultimate3dprintingstore.com/collections/peel-3d?utm_source=youtube&utm_medium=turnwright
Link to American Rotary: https://www.americanrotary.com/
Hot Sot Ovens: https://barzindustrial.com/hotshot-ovens
https://www.americanrotary.com/product-category/hot-shot-ovens/
400
views
8
comments
Another Boxing Move+
Machinist toolboxes, what should be in them and where should they be set up at? LOL, Fighting the flat spots in my shop is one goal that seems to be endless. Glad to be back from our trip to Greece, Turkey , Malta and Italy, jumping right back into projects and work.
“Made in China” is a warning label….
Life is good! Cheers, Keith
Wazer's website : http://www.wazer.com
Link to The Peel 2 3D Scanner: https://ultimate3dprintingstore.com/products/peel-2-cad-s-3d-scanner?utm_source=youtube&utm_medium=turnwright
Link to all Peel 3d Scanners: https://ultimate3dprintingstore.com/collections/peel-3d?utm_source=youtube&utm_medium=turnwright
Link to American Rotary: https://www.americanrotary.com/
Hot Sot Ovens: https://barzindustrial.com/hotshot-ovens
https://www.americanrotary.com/product-category/hot-shot-ovens/
313
views
2
comments
No More Phase Converter
Phase converters are a blessing when you need them, just to be able to run your machines that need it and when you can feed your shop with real 3 Phase from the pole, you really get the quiet snappy current without a secondary motor running in the background. There are a few other perks as well like slightly lower energy bills and more floor space or wall space, not to mention less noise distractions for my viewers during my videos.
“Made in China” is a warning label….
Life is good! Cheers, Keith
Wazer's website : http://www.wazer.com
Link to The Peel 2 3D Scanner: https://ultimate3dprintingstore.com/products/peel-2-cad-s-3d-scanner?utm_source=youtube&utm_medium=turnwright
Link to all Peel 3d Scanners: https://ultimate3dprintingstore.com/collections/peel-3d?utm_source=youtube&utm_medium=turnwright
Link to American Rotary: https://www.americanrotary.com/
Hot Sot Ovens: https://barzindustrial.com/hotshot-ovens
https://www.americanrotary.com/product-category/hot-shot-ovens/
540
views
2
comments
No More Phase Converter
Phase converters are a blessing when you need them, just to be able to run your machines that need it and when you can feed your shop with real 3 Phase from the pole, you really get the quiet snappy current without a secondary motor running in the background. There are a few other perks as well like slightly lower energy bills and more floor space or wall space, not to mention less noise distractions for my viewers during my videos.
“Made in China” is a warning label….
Life is good! Cheers, Keith
Wazer's website : http://www.wazer.com
Link to The Peel 2 3D Scanner: https://ultimate3dprintingstore.com/products/peel-2-cad-s-3d-scanner?utm_source=youtube&utm_medium=turnwright
Link to all Peel 3d Scanners: https://ultimate3dprintingstore.com/collections/peel-3d?utm_source=youtube&utm_medium=turnwright
Link to American Rotary: https://www.americanrotary.com/
Hot Sot Ovens: https://barzindustrial.com/hotshot-ovens
https://www.americanrotary.com/product-category/hot-shot-ovens/
296
views
4
comments
Ball Joints & Tracer Tips 2
Ball Joints & Tracer Tips, continue into Sunday to get them wrapped up for my short week. I must get a bit creative with the jig plate for the tracer ball shape but still maintain full control of adjustments and blend the second cut just right.
“Made in China” is a warning label….
Life is good! Cheers, Keith
Wazer's website : http://www.wazer.com
Link to The Peel 2 3D Scanner: https://ultimate3dprintingstore.com/products/peel-2-cad-s-3d-scanner?utm_source=youtube&utm_medium=turnwright
Link to all Peel 3d Scanners: https://ultimate3dprintingstore.com/collections/peel-3d?utm_source=youtube&utm_medium=turnwright
Link to American Rotary: https://www.americanrotary.com/
Hot Sot Ovens: https://barzindustrial.com/hotshot-ovens
https://www.americanrotary.com/product-category/hot-shot-ovens/
362
views
1
comment
Ball Joints & Tracer Tips 2
Ball Joints & Tracer Tips, continue into Sunday to get them wrapped up for my short week. I must get a bit creative with the jig plate for the tracer ball shape but still maintain full control of adjustments and blend the second cut just right.
“Made in China” is a warning label….
Life is good! Cheers, Keith
Wazer's website : http://www.wazer.com
Link to The Peel 2 3D Scanner: https://ultimate3dprintingstore.com/products/peel-2-cad-s-3d-scanner?utm_source=youtube&utm_medium=turnwright
Link to all Peel 3d Scanners: https://ultimate3dprintingstore.com/collections/peel-3d?utm_source=youtube&utm_medium=turnwright
Link to American Rotary: https://www.americanrotary.com/
Hot Sot Ovens: https://barzindustrial.com/hotshot-ovens
https://www.americanrotary.com/product-category/hot-shot-ovens/
164
views