DavidsWoodturning

Woodturning mallee burl / burr off cuts and left-over pieces into an amazing hybrid knife using epoxy resin. Utilising leftovers are always a great idea as I hate wasting nice wood so like to collect them and turn them into all soft of different artistic projects. Sanded to 600 grit then sprayed with gloss lacquer and finally used a stainless steel insert Website: https://www.davidswoodturning.co.uk Instagram: https://www.instagram.com/davidswoodturning Facebook: https://www.facebook.com/DavidsWoodturningUK In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊 Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects. Thanks for watching and see you back soon for my next weekly video 😊 DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

Almost broke the lathe by turning this MASSIVE elm burl vase Turning a burl size like this on a wood lathe comes with some challenges but it did not stop me to turning this massive burr / burl into a stunning wooden vase with glass tube insert to make it a fully functional art piece. Hollowing the wooden art was rather difficult so had to improvise halfway through. This burl had so much characteristics so wanted to retain some of the live edge burl to showcase it in the final result. Website: https://www.davidswoodturning.co.uk Instagram: https://www.instagram.com/davidswoodturning Facebook: https://www.facebook.com/DavidsWoodturningUK In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊 Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects. Thanks for watching and see you back soon for my next weekly video 😊 DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

This week, I will wood turn a heavily woodworm infester oak log firewood into beautiful art project. I could not decide whether this is a wooden bowl or wood vase / vessel so let me know what you think. Turing this unbalanced log on my woodturning lathe was a challenge so went very slow until most wood was carved. Finished the bowl with mineral oil to allow the wood grain to pop and show its natural beauty. Website: https://www.davidswoodturning.co.uk Instagram: https://www.instagram.com/davidswoodturning Facebook: https://www.facebook.com/DavidsWoodturningUK In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊 Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects. Thanks for watching and see you back soon for my next weekly video 😊 DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

In this woodturning video, I will turn some incredible looking elm burl into a hybrid truly one-of-a-kind project. This hybrid blank had so much possibilities from hybrid goblets to pepper mills but I decided to go with something different to celebrate a huge milestone for this channel. Casted in deep pour epoxy resin, infused with glittery epoxy pigments, turned and sanded on the lathe but celebrating with you all together :) Thank you ever so much for the positive words for my first ever voiceover video earlier this week it means a lot! More to come ;) Website: https://www.davidswoodturning.co.uk Instagram: https://www.instagram.com/davidswoodturning Facebook: https://www.facebook.com/DavidsWoodturningUK In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊 Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects. Thanks for watching and see you back soon for my next weekly video 😊 DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

In this woodturning video, I will turn some oven dried pine cones into a hybrid multi coloured epoxy resin bowl. 😉 The pine cones were dried in the over for several hours in preparation for casting them into resin where I used blue and gold resin metallic pigment. The pine cones were not stabilised but from previous woodturning experience I did not feel the need of the lengthy process. Website: https://www.davidswoodturning.co.uk Instagram: https://www.instagram.com/davidswoodturning Facebook: https://www.facebook.com/DavidsWoodturningUK In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊 Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects. Thanks for watching and see you back soon for my next weekly video 😊 DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

In this woodturning video, I will turn an Australian mallee burl or burr into a beautiful mini vase. Used gold epoxy resin and mix epoxy pigments what really completed the light brown wood colour. When working on hybrid woodturning project like this I use negative rake carbide tips what woks great on resin to reduce (stop) any chip out while turning on the lathe. Wet sanded all the way to 2000grit and a light polish and buff to bring the shine out. Happy watching 😉 Website: https://www.davidswoodturning.co.uk Instagram: https://www.instagram.com/davidswoodturning Facebook: https://www.facebook.com/DavidsWoodturningUK In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊 Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects. Thanks for watching and see you back soon for my next weekly video 😊 DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

In this woodturning video, I will transform some large spalted burls or burrs into a hybrid epoxy resin vase / vessel. This project is a fully functional piece of art due to the glass insert what protect the wood from any water damage. To achieve high gloss finish with this woodworking craft item I used several layers of gloss lacquer. At some point making this project I thought it is a complete failure due to some hiccup but glad I decided to go ahead and finish 😊 Website: https://www.davidswoodturning.co.uk Instagram: https://www.instagram.com/davidswoodturning Facebook: https://www.facebook.com/DavidsWoodturningUK In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊 Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects. Thanks for watching and see you back soon for my next weekly video 😊 DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

In this woodturning video, I will transform a giant kiln dried oak burl / burr into a huge wooden salad bowl with additional feet carved to the bottom of the bowl. Projects, sized like this needs time and patience as you can only turn at a very low speed on the wood turning lathe until is rough turned. I also used my one-way coring system to ensure I can reduce any wood waste an maximise the burl’s potential to make more than just one wooden bowl. Happy Watching 😊 Website: https://www.davidswoodturning.co.uk Instagram: https://www.instagram.com/davidswoodturning Facebook: https://www.facebook.com/DavidsWoodturningUK In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊 Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects. Thanks for watching and see you back soon for my next weekly video 😊 DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

Woodturning some elm burls into a hybrid wedding goblet with two captive rings. It was a freshly cut burl/burr but spent 30hrs in the oven to dry then some cleaning to do before it can be casted in epoxy resin to make the hybrid blank. Mixed with blue resin mica powder to compliment the wood. 2 captive rings were added during wood turning and sprayed with lacquer to extra shine. Website: https://www.davidswoodturning.co.uk Instagram: https://www.instagram.com/davidswoodturning Facebook: https://www.facebook.com/DavidsWoodturningUK In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊 Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects. Thanks for watching and see you back soon for my next weekly video 😊 DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

Woodturning some amazing air dried Australian mallee burls into a vibrant looking vase / vessel. Used a total of 4 different pieces of burrs and mixed 3 type of colours to achieve this stunning look. Wet sanded all the way to 2000grit then polished to high shine. Inspired by the upcoming American Independence Day so the colours of their flags have been used however there are many other countries around the world with the same colours who can adopt this project easily 😊. Website: https://www.davidswoodturning.co.uk Instagram: https://www.instagram.com/davidswoodturning Facebook: https://www.facebook.com/DavidsWoodturningUK In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊 Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects. Thanks for watching and see you back soon for my next weekly video 😊 DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

In this woodturning video, I will turn a big log of American black walnut into a stunning looking textured wooden bowl. It was rough turned then air dried for 12 months before I could finish this woodturning project on my lathe. For carving or texturing I used a Proxxon grinder with carbide disc what has done an incredible job. Used plenty of sanding sealer and the wood was tearing out where the end grain was. Happy Watching 😊 Website: https://www.davidswoodturning.co.uk Instagram: https://www.instagram.com/davidswoodturning Facebook: https://www.facebook.com/DavidsWoodturningUK In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊 Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects. Thanks for watching and see you back soon for my next weekly video 😊 DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

In this woodturning video, I will transform an Australian mallee burl into a hybrid night lamp using epoxy resin. I coloured the resin with light blue mica powder and touch of dye to keep slightly transparent look. For woodturning I used my negative rake carbide chisels what works best of epoxy resin. I used some ready-made LED light base what secured to the bottom with some 30mins epoxy resin. Happy Watching 😊 Website: https://www.davidswoodturning.co.uk Instagram: https://www.instagram.com/davidswoodturning Facebook: https://www.facebook.com/DavidsWoodturningUK In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊 Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects. Thanks for watching and see you back soon for my next weekly video 😊 DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

In this woodturning video, I will transform an Australian mallee burl into a beer glass. Before casting the piece in to epoxy resin I used some 30mins resin and mica pigments to give some colours to the burl. Then it was casted with deep pour resin and turned on my lathe using negative rake carbide tools mainly for great results. I tested the glass with a nice chilled beer but please note this will not be used in the future and will only serve as ornamental piece. Happy Watching 😊 Website: https://www.davidswoodturning.co.uk Instagram: https://www.instagram.com/davidswoodturning Facebook: https://www.facebook.com/DavidsWoodturningUK In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊 Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects. Thanks for watching and see you back soon for my next weekly video 😊 DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

In this woodturning video, I will transform some pine cones into a hybrid epoxy resin vase / vessel. Using different shades of green resin with mica powder to add a special effect into the end product. Before casting this piece, I let the resin to set for 5hrs to ensure after pouring into the mould the colours do not blend. Using negative rake carbide tips help massively when working with resin to avoid any chip outs. It was coated with epoxy resin to bring out all the colours. Happy Watching 😊 Website: https://www.davidswoodturning.co.uk Instagram: https://www.instagram.com/davidswoodturning Facebook: https://www.facebook.com/DavidsWoodturningUK In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊 Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects. Thanks for watching and see you back soon for my next weekly video 😊 DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

In this woodturning video, I will re-cycle some left over plywood to turning this into and artistic wood turned and carved wooden vase. I glued together the plywood strips then cut them into segments with 12 pieces in each ring to form the main vase. Turning this wood on the lathe was fairly easy and the fun could begin and started to do the carving with a power tool. Finally applied some Rubio Monocoat Pine oil the pop the colours. Happy Watching! Website: https://www.davidswoodturning.co.uk Instagram: https://www.instagram.com/davidswoodturning Facebook: https://www.facebook.com/DavidsWoodturningUK In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊 Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects. Thanks for watching and see you back soon for my next weekly video 😊 DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

In this woodturning video, I will transform my leftover hardwood pieces into a magical and vibrant swirly hollow form on my lathe. This was the result a bigger wood turning project had some left-over resin so chucked some hardwood pieces into a container and poured the extra epoxy resin. Few days later it was ready to go on the lathe and certainly worth the effort as the colours are insane. Happy Watching! Website: https://www.davidswoodturning.co.uk Instagram: https://www.instagram.com/davidswoodturning Facebook: https://www.facebook.com/DavidsWoodturningUK In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊 Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects. Thanks for watching and see you back soon for my next weekly video 😊 DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

In this woodturning video, I will transform an Australian red mallee burl into a footed little wooden bowl in rather an exquisite shape. I mounted the piece on my wood turning lathe way off cantered to allow to shape the unique formation. At the end I carved three tiny feet to the bottom to further enhance its natural beauty. Happy Watching! Website: https://www.davidswoodturning.co.uk Instagram: https://www.instagram.com/davidswoodturning Facebook: https://www.facebook.com/DavidsWoodturningUK In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊 Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects. Thanks for watching and see you back soon for my next weekly video 😊 DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

In this woodturning video, I will transform a big and burly black locust wood log into an incredible looking footed wooden bowl. I decided to wood turn this piece of log into a live / natural edge bowl (is a bowl that uses the natural contour of the bark side of a log as the top rim edge of the bowl) to enhance its natural beauty. I sanded up to 240 grit then finished with some Rubio Monocoat what really pops the grain and also smells amazing. Website: https://www.davidswoodturning.co.uk Instagram: https://www.instagram.com/davidswoodturning Facebook: https://www.facebook.com/DavidsWoodturningUK In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊 Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects. Thanks for watching and see you back soon for my next weekly video 😊 DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

In this woodturning video I will transform an Australian red mallee burl into a hybrid blue vase. I have some small burl pieces what is ideal for such wood turning projects and it also great for beginner wood turners as very good wood to work with. When rough shaping the blank I use traditional tools with lower speed so cause loads of chip outs but then I swap over to a negative rake carbide tool and increase the lathe speed and smooths out the surface in no time. Wet sanded all the way to 3000 grit then a good polish made it look like glass. Website: https://www.davidswoodturning.co.uk Instagram: https://www.instagram.com/davidswoodturning Facebook: https://www.facebook.com/DavidsWoodturningUK In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊 Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects. Thanks for watching and see you back soon for my next weekly video 😊 DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

In this woodturning video, I will experiment with multi-colour epoxy resin pour to create and hybrid resin and burl goblet with two captive rings. I used kiln dried elm burl and resin to create this woodturning project and the idea was to start from dark green epoxy pigments and as it builds up the colours get lighter with the top being clear resin. To achieve high gloss finish I used several coats of acrylic lacquer. Happy Watching 😊 Website: https://www.davidswoodturning.co.uk Instagram: https://www.instagram.com/davidswoodturning Facebook: https://www.facebook.com/DavidsWoodturningUK In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊 Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects. Thanks for watching and see you back soon for my next weekly video 😊 DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

In this woodturning video, I will transform some ordinary pine cones into hybrid epoxy resin bowl. This resin art piece combines a simple material as the pine cones widely available for low cost or free in combination with epoxy resin to give that modern touch to the piece. For this reason, even for beginner woodturners a great project to start with to experience hybrid woodturning and to create something very unique. The resin bowl was wet sanded to high grit then polish to great shine. Website: https://www.davidswoodturning.co.uk Instagram: https://www.instagram.com/davidswoodturning Facebook: https://www.facebook.com/DavidsWoodturningUK In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊 Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects. Thanks for watching and see you back soon for my next weekly video 😊 DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

This woodturning project is one of my older turning from the past because due to some sickness unfortunately did not have enough time/power to finish the new video. Will back on full load next week 😊 I hate wasting resin so like to pour my leftovers into a pot/cup and add some pieces of pine cone, banksia nut, burl and so on to spices up the project a little. I accumulated this over the past few months and it was time to wood turn this into something cool looking. Happy Watching 😊 Website: https://www.davidswoodturning.co.uk Instagram: https://www.instagram.com/davidswoodturning Facebook: https://www.facebook.com/DavidsWoodturningUK In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊 Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects. Thanks for watching and see you back soon for my next weekly video 😊 DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

In this woodturning video I will transform an Australian red mallee burl into a hybrid dragon egg. Using epoxy resin with wood can lead to some fantastic result and in this project, I also tried different techniques to paint the wood to enhance the effect. Used colour shifting epoxy pigments with two-part resin then the blank was ready to be casted. Wet sanded all the way to 3000 grit then a good polish made it look like glass. Website: https://www.davidswoodturning.co.uk Instagram: https://www.instagram.com/davidswoodturning Facebook: https://www.facebook.com/DavidsWoodturningUK In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊 Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects. Thanks for watching and see you back soon for my next weekly video 😊 DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

In this woodturning video, I transform a giant monkey puzzle log to a giant bowl with carved feet. Before finishing this bowl, it was rough turned and air dried for 12 months before It could go back on the lathe to final turn. Monkey puzzle has very unique look in the inside or outside but rather soft wood to turn so plenty of sanding needed to smooth out the surface. Finished with couple of layers of Danish Oil to pop the grain. Happy Watching 😊 Website: https://www.davidswoodturning.co.uk Instagram: https://www.instagram.com/davidswoodturning Facebook: https://www.facebook.com/DavidsWoodturningUK In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊 Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects. Thanks for watching and see you back soon for my next weekly video 😊 DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

In this woodturning video, I will turn a large kiln dried elm burl / burr into a vase. I decided not to use any epoxy resin as the wood itself was so incredible so wanted to keep as natural looking as possible. Due to its end grain turning coring the inside of the log was rather challenging but some sharp carbide tip cut through the wood nicely. To pop the grain, I used several coats of boiled linseed oil and left my maker mark in the bottom of the vase with the help of some two parts resin. Happy Watching 😊 Website: https://www.davidswoodturning.co.uk Instagram: https://www.instagram.com/davidswoodturning Facebook: https://www.facebook.com/DavidsWoodturningUK In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊 Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects. Thanks for watching and see you back soon for my next weekly video 😊 DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.