Can you turn GOLF BALLS into a ....???
In this wood turning or should say resin turning video, I will attempt to turn golf balls into a cool project. Was not too sure what to make out of them but during making the project I decided to make epoxy resin hybrid night lamp as the balls looked really cool and vibrant colours. I should have sanded the balls as the resin could not bond very well therefore I did not want to make the wall very thin.
Website: https://www.davidswoodturning.co.uk
Instagram: https://www.instagram.com/davidswoodt...
Facebook: https://www.facebook.com/DavidsWoodtu...
Affiliated Link:
10% OFF on Starbond Glue Website
Use Code: DSWT10
https://www.starbond.com/?rfsn=561208...
In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊
Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects.
Thanks for watching and see you back soon for my next weekly video 😊
DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
66
views
Woodturning - Beehive Segmented Vase
In this woodturning video, I transform some left-over offcuts pieces into a beehive inspired segmented vase. When I made my earlier chaotic / chaos segmented vase had some extra material made up so decided to use them for a smaller project. This segmented chaos vase was inspired by those stunning chaotic cutting / chopping board people make but I wanted to put my own spin into it. I used number of different hardwoods like purple Heart, oak, sapele, zebrano, beech, ash, elm, walnut, wenge, padauk. It was plenty of cutting and gluing but was certainly worth all the effort.😊
Website: https://www.davidswoodturning.co.uk
Instagram: https://www.instagram.com/davidswoodturning
Facebook: https://www.facebook.com/DavidsWoodturningUK
Affiliated Link:
Von Hanke branding coins:
10% discount code, valid until the end of October
https://www.etsy.com/shop/vonHanke?coupon=DAVID10OFF
3 inch/75mm Steel Face Plate with Screws https://bit.ly/3hFM7pR
Drillpro Upgraded Multi-purpose Double Feather Board https://bit.ly/36DQQSz
HONGDUI Red Quick Acting Hold Down Clamp https://bit.ly/3ienaku
10% OFF on Starbond Glue Website
Use Code: DSWT10
https://www.starbond.com/?rfsn=5612082.c38978&utm_source=refersion&utm_medium=affiliate&utm_campaign=5612082.c38978
In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊
Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects.
Thanks for watching and see you back soon for my next weekly video 😊
DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
73
views
Woodturning - a Black Walnut Log Into a Vessel
In this video, I turn a natural live edge vessel / vase from an American black walnut log. The log was badly cracked so could not use all part of the wood therefore cut the best part out so I can wood turn this into a vase. A natural edge bowl or vase is one where the rim of the project utilises the wood in its natural state and flowing with the natural surface characteristics of the log. This wooden vessel was finished with boiled linseed oil. 😊
Website: https://www.davidswoodturning.co.uk
Instagram: https://www.instagram.com/davidswoodturning
Facebook: https://www.facebook.com/DavidsWoodturningUK
Affiliated Link:
3 inch/75mm Steel Face Plate with Screws https://bit.ly/3hFM7pR
Drillpro Upgraded Multi-purpose Double Feather Board https://bit.ly/36DQQSz
HONGDUI Red Quick Acting Hold Down Clamp https://bit.ly/3ienaku
10% OFF on Starbond Glue Website
Use Code: DSWT10
https://www.starbond.com/?rfsn=5612082.c38978&utm_source=refersion&utm_medium=affiliate&utm_campaign=5612082.c38978
In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊
Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects.
Thanks for watching and see you back soon for my next weekly video 😊
DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
#woodturningvase #liveedgevessel #vessel #vase #woodturninglathe #naturaledge #logtovase #turningavessel #simpleturning
78
views
Woodturning - GIANT Log to Bowl
In this wood turning video I attempt to turn a giant monkey puzzle log into a beautiful looking wooden bowl. Monkey puzzle has some really interesting branches growing through the entire log giving plenty of characteristics to the piece. It was also spalted at many places what further enhance the overall look. Carved tiny feet to the bottom and added my branding logo. Finished with few coats of Danish oil. 😊
Website: https://www.davidswoodturning.co.uk
Instagram: https://www.instagram.com/davidswoodturning
Facebook: https://www.facebook.com/DavidsWoodturningUK
Affiliated Link:
3 inch/75mm Steel Face Plate with Screws https://bit.ly/3hFM7pR
Drillpro Upgraded Multi-purpose Double Feather Board https://bit.ly/36DQQSz
HONGDUI Red Quick Acting Hold Down Clamp https://bit.ly/3ienaku
10% OFF on Starbond Glue Website
Use Code: DSWT10
https://www.starbond.com/?rfsn=5612082.c38978&utm_source=refersion&utm_medium=affiliate&utm_campaign=5612082.c38978
In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊
Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects.
Thanks for watching and see you back soon for my next weekly video 😊
DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
83
views
Woodturning - GIANT Oak Burl Bowl (15kg / 33lbs)
Woodturning this incredible giant English oak burl bowl, out of massive blank what weights approx. 15kg or 33lbs total and 40cm/16” diameter. This huge burl / burr is full of amazing grain characteristics and also found a living creator inside 😊 Wood turning this size wooden bowls requires a stronger lathe, slow speed and loads of patience but well worth the effort as the final result is awesome. Finished with boiled linseed oil to pop the grain. 😊
Website: https://www.davidswoodturning.co.uk
Instagram: https://www.instagram.com/davidswoodturning
Facebook: https://www.facebook.com/DavidsWoodturningUK
Affiliated Link:
3 inch/75mm Steel Face Plate with Screws https://bit.ly/3hFM7pR
Drillpro Upgraded Multi-purpose Double Feather Board https://bit.ly/36DQQSz
HONGDUI Red Quick Acting Hold Down Clamp https://bit.ly/3ienaku
10% OFF on Starbond Glue Website
Use Code: DSWT10
https://www.starbond.com/?rfsn=5612082.c38978&utm_source=refersion&utm_medium=affiliate&utm_campaign=5612082.c38978
In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊
Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects.
Thanks for watching and see you back soon for my next weekly video 😊
DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
82
views
Woodturning - Aluminium Vase
Let’s see how to turn a segmented aluminium vase. Turning on a wood lathe is fun and challenging time to time and in this week’s project I certainly tested myself. In this woodworking video I will wood turn a wooden vase out of sapele hardwood and aluminium pieces. I will show how to cut the segmented pieces then gluing them together with epoxy resin to make perfect rings. 😊
Website: https://www.davidswoodturning.co.uk
Instagram: https://www.instagram.com/davidswoodturning
Facebook: https://www.facebook.com/DavidsWoodturningUK
Affiliated Link:
3 inch/75mm Steel Face Plate with Screws https://bit.ly/3hFM7pR
Drillpro Upgraded Multi-purpose Double Feather Board https://bit.ly/36DQQSz
HONGDUI Red Quick Acting Hold Down Clamp https://bit.ly/3ienaku
10% OFF on Starbond Glue Website
Use Code: DSWT10
https://www.starbond.com/?rfsn=5612082.c38978&utm_source=refersion&utm_medium=affiliate&utm_campaign=5612082.c38978
In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊
Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects.
Thanks for watching and see you back soon for my next weekly video 😊
DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
82
views
Woodturning - Burl to Vase
In this woodturning video, I transform a horse chestnut spalted burl / burr piece into a hybrid ocean blue epoxy resin vase on my wood turning lathe. It was wet sanded till 4000 grit then polished and buffed to high shine. I mixed some blue alcohol ink into the resin. This burl to vase project was inspired by the ocean and the surface of the burl was painted with UV resin using gold and green colour to reflect on some of the great colours underwater. 😊
Website: https://www.davidswoodturning.co.uk
Instagram: https://www.instagram.com/davidswoodturning
Facebook: https://www.facebook.com/DavidsWoodturningUK
Affiliated Link:
3 inch/75mm Steel Face Plate with Screws https://bit.ly/3hFM7pR
Drillpro Upgraded Multi-purpose Double Feather Board https://bit.ly/36DQQSz
HONGDUI Red Quick Acting Hold Down Clamp https://bit.ly/3ienaku
10% OFF on Starbond Glue Website
Use Code: DSWT10
https://www.starbond.com/?rfsn=5612082.c38978&utm_source=refersion&utm_medium=affiliate&utm_campaign=5612082.c38978
In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊
Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects.
Thanks for watching and see you back soon for my next weekly video 😊
DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
67
views
Woodturning - Live Edge Walnut Bowl
In this woodworking video, I used a woodturning lathe to turn a large American black walnut log into a natural live edge bowl. A natural edge bowl is one where the rim of the bowl utilises the wood in its natural state and flowing with the natural surface characteristics of the log, and typically will have two high points and two low. Coated the bark with sanding sealer and CA glue to help stabilise the bark and for finish used Danish oil … 😊
Website: https://www.davidswoodturning.co.uk
Instagram: https://www.instagram.com/davidswoodturning
Facebook: https://www.facebook.com/DavidsWoodturningUK
Affiliated Link:
3 inch/75mm Steel Face Plate with Screws https://bit.ly/3hFM7pR
Drillpro Upgraded Multi-purpose Double Feather Board https://bit.ly/36DQQSz
HONGDUI Red Quick Acting Hold Down Clamp https://bit.ly/3ienaku
10% OFF on Starbond Glue Website
Use Code: DSWT10
https://www.starbond.com/?rfsn=5612082.c38978&utm_source=refersion&utm_medium=affiliate&utm_campaign=5612082.c38978
In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊
Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects.
Thanks for watching and see you back soon for my next weekly video 😊
DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
83
views
Woodturning - Segmented Chaos Vase (~1500 pieces)
Wanted to do this segmented woodturning project for very long time so I am pleased it came to reality now. This segmented chaos vase was inspired by those stunning chaotic cutting / chopping board people make but I wanted to put my own spin into it. I used number of different hardwoods like purple Heart, oak, sapele, zebrano, beech, ash, elm, walnut, wenge, padauk. It was plenty of cutting and gluing but was certainly worth all the effort.
Website: https://www.davidswoodturning.co.uk
Instagram: https://www.instagram.com/davidswoodturning
Facebook: https://www.facebook.com/DavidsWoodturningUK
Affiliated Link:
10% OFF on Starbond Glue Website
Use Code: DSWT10
https://www.starbond.com/?rfsn=5612082.c38978&utm_source=refersion&utm_medium=affiliate&utm_campaign=5612082.c38978
In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊
Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects.
Thanks for watching and see you back soon for my next weekly video 😊
DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
65
views
Woodturning - Hybrid Burl Lamp
Woodturning some left over hybrid epoxy resin and burl / burr pieces into a night table lamp. As the base of the lamp I used a burly horse chestnut and finished with Danish oil. This hybrid burl lamp was to try a different woodturning project than I usually make and please with the end result. Wood and resin are a great combo to make one of kind handmade items and with a bit of creativity and imagination the result can be very artistic 😊
Website: https://www.davidswoodturning.co.uk
Instagram: https://www.instagram.com/davidswoodturning
Facebook: https://www.facebook.com/DavidsWoodturningUK
Affiliated Link:
10% OFF on Starbond Glue Website
Use Code: DSWT10
https://www.starbond.com/?rfsn=5612082.c38978&utm_source=refersion&utm_medium=affiliate&utm_campaign=5612082.c38978
In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊
Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects.
Thanks for watching and see you back soon for my next weekly video 😊
DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
73
views
Woodturning / carving – Heart of Holes Plate
In this video, I wood turn a simple looking London plane blank into an artistic looking plate and call it the Heart of Holes. Hundreds of tiny holes were carved into the platter after woodturning with Dremel tool, some went all the way through but some just as surface texturing. After plenty of sanding some of the holes were painted with acrylic paint and sanded again. Finally, some Danish Oil was applied to bring out the colours and the grain. 😊
Website: https://www.davidswoodturning.co.uk
Instagram: https://www.instagram.com/davidswoodturning
Facebook: https://www.facebook.com/DavidsWoodturningUK
Affiliated Link:
10% OFF on Starbond Glue Website
Use Code: DSWT10
https://www.starbond.com/?rfsn=5612082.c38978&utm_source=refersion&utm_medium=affiliate&utm_campaign=5612082.c38978
In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊
Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects.
Thanks for watching and see you back soon for my next weekly video 😊
DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
70
views
Woodturning - Burl Yew Log to Vase
Mounted on my woodturning lathe this large yew burl / burr log to wood turn into a vase. During turning it has shown its natural beauty and revealed some amazing grain patterns, colours and burrs / burls. To add a little extra feature 3 little foot was carved into the bottom to stand on and finished with Danish oil then buffed to great shine. 😊
Website: https://www.davidswoodturning.co.uk
Instagram: https://www.instagram.com/davidswoodturning
Facebook: https://www.facebook.com/DavidsWoodturningUK
Affiliated Link:
10% OFF on Starbond Glue Website
Use Code: DSWT10
https://www.starbond.com/?rfsn=5612082.c38978&utm_source=refersion&utm_medium=affiliate&utm_campaign=5612082.c38978
In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊
Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects.
Thanks for watching and see you back soon for my next weekly video 😊
DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
55
views
Woodturning - Hybrid Burl Goblet
Stabilised burl turned into a hybrid wedding goblet with two captive rings. It was a freshly cut burl/burr but spent 30hrs in the oven to dry out then stabilisation process could begin. Mixed with green resin powder what turned into more like blue after casting in the pressure pot. 2 captive rings were added during wood turning and sprayed with lacquer to extra shine. 😊
Instagram: https://www.instagram.com/davidswoodturning
Facebook: https://www.facebook.com/DavidsWoodturningUK
Website: https://www.davidswoodturning.co.uk
Affiliated Link:
10% OFF on Starbond Glue Website
Use Code: DSWT10
https://www.starbond.com/?rfsn=5612082.c38978&utm_source=refersion&utm_medium=affiliate&utm_campaign=5612082.c38978
In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊
Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects.
Thanks for watching and see you back soon for my next weekly video 😊
DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
58
views
Woodturning - Punky Spalted Beech Hollow Form
Picked up some time ago few logs of spalted beech and it was time to turn them into nice hollo form. Due to its super characteristics and originally it meant to be a firewood for sure that would have been a bad decision as turning this into a great project just shown how simple firewood can be wood turned into something magical. Used a segmented wenge ring in the middle to add extra look 😊
Instagram: https://www.instagram.com/davidswoodturning
Facebook: https://www.facebook.com/DavidsWoodturningUK
Website: https://www.davidswoodturning.co.uk
Affiliated Link:
10% OFF on Starbond Glue Website
Use Code: DSWT10
https://www.starbond.com/?rfsn=5612082.c38978&utm_source=refersion&utm_medium=affiliate&utm_campaign=5612082.c38978
In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊
Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects.
Thanks for watching and see you back soon for my next weekly video 😊
DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
60
views
Woodturning - Wood Bouquet Vase
Re-cycling some off cuts pieces of hardwood to wood turn them into a wooden bouquet vase. The species I used in this video was Zebrano, burl/burr, wenge, oak, sapele, purpleheart, pedauk, iroko, ash and American walnut. For resin pigments I chose purple colour and used my chameleon type pigments to achieve cool effect. After casting is was ready to go up on my woodturning lathe to make it round and turn it into a vase 😊
Instagram: https://www.instagram.com/davidswoodturning
Facebook: https://www.facebook.com/DavidsWoodturningUK
Website: https://www.davidswoodturning.co.uk
Affiliated Link:
10% OFF on Starbond Glue Website
Use Code: DSWT10
https://www.starbond.com/?rfsn=5612082.c38978&utm_source=refersion&utm_medium=affiliate&utm_campaign=5612082.c38978
In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊
Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects.
Thanks for watching and see you back soon for my next weekly video 😊
DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
64
views
Woodturning - Cheese Knife
Re-cycling an old and blunt table saw blade to wood turn into cheese knife. Used a piece of pinecone and purple heart transition and multi coloured pigments for the resin the make the knife handle. After woodturning the handle, it was sanded up to 12000 grit and polished for good shine. Cut the knife blade with my angle grinder and then sanding begun. Sanded all the way till 3000 grit to achieve nice and smooth surface. Used 5 mins epoxy to glue the blade into the handle and we were off to go to test the knife on piece of cheese 😊
Instagram: https://www.instagram.com/davidswoodturning
Facebook: https://www.facebook.com/DavidsWoodturningUK
Website: https://www.davidswoodturning.co.uk
Affiliated Link:
10% OFF on Starbond Glue Website
Use Code: DSWT10
https://www.starbond.com/?rfsn=5612082.c38978&utm_source=refersion&utm_medium=affiliate&utm_campaign=5612082.c38978
Affiliated Link:
10% OFF on Starbond Glue Website
Use Code: DSWT10
https://www.starbond.com/?rfsn=5612082.c38978&utm_source=refersion&utm_medium=affiliate&utm_campaign=5612082.c38978
In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊
Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects.
Thanks for watching and see you back soon for my next weekly video 😊
DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
66
views
Woodturning - Dragon Bowl from End Grain Black Walnut
Huge American black walnut log turned into an end grain dragon bowl. The final piece reminded my wife to a dragon egg and skin of the dragon therefore the name of this project. Used my one-way easy coring system to produce two bowls out of this log. Due to end grain turning that made it a little harder so tried to be passioned to allowed the cutter to do its job. To add extra features, I added some wave effect to both to the top and bottom. Finished with boiled linseed oil hope you enjoy this woodturning project 😊
Instagram: https://www.instagram.com/davidswoodturning
Facebook: https://www.facebook.com/DavidsWoodturningUK
Website: https://www.davidswoodturning.co.uk
Affiliated Link:
10% OFF on Starbond Glue Website
Use Code: DSWT10
https://www.starbond.com/?rfsn=5612082.c38978&utm_source=refersion&utm_medium=affiliate&utm_campaign=5612082.c38978
In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊
Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects.
Thanks for watching and see you back soon for my next weekly video 😊
DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
71
views
Woodturning – LARGE Elm Burl
Large piece of elm burl went up on the lathe to wood turn this into a nice and decorative burl/burr plate or platter. Slightly irregular thickness of the timber limited my options so decided to woodturning this piece into more an ornamental project. Finished with some Danish oil and the grains certainly popped after the first coat. Happy watching 😊
Instagram: https://www.instagram.com/davidswoodturning
Facebook: https://www.facebook.com/DavidsWoodturningUK
Website: https://www.davidswoodturning.co.uk
Affiliated Link:
10% OFF on Starbond Glue Website
Use Code: DSWT10
https://www.starbond.com/?rfsn=5612082.c38978&utm_source=refersion&utm_medium=affiliate&utm_campaign=5612082.c38978
In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊
Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects.
Thanks for watching and see you back soon for my next weekly video 😊
DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
59
views
Woodturning - Burl to Bowl
Woodturning a large piece of burl to bowl by infusing the project with golden and purple resin. Some places the burr/burl has nice spalting is going on to add even more characteristics to the project. This hybrid wood turning piece was finished with Yorkshire grit and buffed to add extra shine to it and the very last step for to apply few coats of mineral oil to allow all those beautiful grains to pop.
Instagram: https://www.instagram.com/davidswoodturning
Facebook: https://www.facebook.com/DavidsWoodturningUK
Website: https://www.davidswoodturning.co.uk
Affiliated Link:
10% OFF on Starbond Glue Website
Use Code: DSWT10
https://www.starbond.com/?rfsn=5612082.c38978&utm_source=refersion&utm_medium=affiliate&utm_campaign=5612082.c38978
In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊
Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects.
Thanks for watching and see you back soon for my next weekly video 😊
DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
56
views
Woodturning – Spalted Beech Carved Vase
Rescuing some rotten and spalted beech fire wood to wood turn into a carved vase. Wanted to keep as live edge project but sadly the bark fell off during turning so after a little improvisation I got my kutzall carving disc to make the magic. Finished with Danish oil to bring the colours out
Instagram: https://www.instagram.com/davidswoodturning
Facebook: https://www.facebook.com/DavidsWoodturningUK
Website: https://www.davidswoodturning.co.uk
Affiliated Link:
10% OFF on Starbond Glue Website
Use Code: DSWT10
https://www.starbond.com/?rfsn=5612082.c38978&utm_source=refersion&utm_medium=affiliate&utm_campaign=5612082.c38978
In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊
Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects.
Thanks for watching and see you back soon for my next weekly video 😊
DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
72
views
Woodturning - Globe🌎Earth🌍Hybrid Bowl
In this project video, I used some beech hardwood and turned them into segments to create this epic globe earth bowl. Inlayed with blue/green resin after routered out the continents. Hardest part was to work with the given sizes of the bowl where the diameter was way too long considering of the height of the bowl so to fit the earth on it was a challenge. After many learnings during this project version two to follow so stay tuned 😊
Instagram: https://www.instagram.com/davidswoodturning
Facebook: https://www.facebook.com/DavidsWoodturningUK
Website: https://www.davidswoodturning.co.uk
Affiliated Link:
10% OFF on Starbond Glue Website
Use Code: DSWT10
https://www.starbond.com/?rfsn=5612082.c38978&utm_source=refersion&utm_medium=affiliate&utm_campaign=5612082.c38978
In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊
Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects.
Thanks for watching and see you back soon for my next weekly video 😊
Please check out my other videos and consider subscribing if you enjoyed the video and comment below 😊
DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
57
views
Woodturning – Left over RESIN and WOODEN pieces
Recycling my left-over resin and some off cuts pieces of hardwood, banksia pod and pine cone to make this vibrant and cool looking little lidded pot. Wet sanded up to 3000grit then some Yorkshire grit to shine up 😊
Instagram: https://www.instagram.com/davidswoodturning
Facebook: https://www.facebook.com/DavidsWoodturningUK
Website: https://www.davidswoodturning.co.uk
Affiliated Link:
10% OFF on Starbond Glue Website
Use Code: DSWT10
https://www.starbond.com/?rfsn=5612082.c38978&utm_source=refersion&utm_medium=affiliate&utm_campaign=5612082.c38978
In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊
Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects.
Thanks for watching and see you back soon for my next weekly video 😊
DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
65
views
Woodturning - FIRE Log To FIRE Vase 🔥
In this video I will show how to turn a beautiful log into the breath-taking fire vase using epoxy resin and red pigments. Log is unknown, could be a mulberry piece but it has intense yellow colour what makes it the prefect match to combine with red resin to create lava/ fire effect. Sanded to high grit then some Yorkshire grit and final buff to give a good shine.
Instagram: https://www.instagram.com/davidswoodturning
Facebook: https://www.facebook.com/DavidsWoodturningUK
Website: https://www.davidswoodturning.co.uk
Affiliated Link:
10% OFF on Starbond Glue Website
Use Code: DSWT10
https://www.starbond.com/?rfsn=5612082.c38978&utm_source=refersion&utm_medium=affiliate&utm_campaign=5612082.c38978
In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊
Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects.
Thanks for watching and see you back soon for my next weekly video 😊
DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
73
views
Woodturning - Burl To Vase
Transforming a big piece of ash burl into a natural looking vase. This burl to vase project was to show how an ordinary wood can be turned into a decorative and artistic creation. Created three little legs using my Dremel tools to add extra feature to the project then sanded up to 500girt and finished with some Danish oil
Instagram: https://www.instagram.com/davidswoodturning
Facebook: https://www.facebook.com/DavidsWoodturningUK
Website: https://www.davidswoodturning.co.uk
Affiliated Link:
10% OFF on Starbond Glue Website
Use Code: DSWT10
https://www.starbond.com/?rfsn=5612082.c38978&utm_source=refersion&utm_medium=affiliate&utm_campaign=5612082.c38978
In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊
Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects.
Thanks for watching and see you back soon for my next weekly video 😊
DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
65
views
Woodturning - Bowling Ball
In this video I attempt to turn a beautiful bowling ball into a cool looking project. I was always curious; can you turn a bowling ball? Never turned anything like this before but it seemed a good fun to do and the final piece turned out amazing. Few challenges along the way like making a funnel out of the ball so PlanB came into place to rescues the project. 😊
Instagram: https://www.instagram.com/davidswoodturning
Facebook: https://www.facebook.com/DavidsWoodturningUK
Website: https://www.davidswoodturning.co.uk
Affiliated Link:
10% OFF on Starbond Glue Website
Use Code: DSWT10
https://www.starbond.com/?rfsn=5612082.c38978&utm_source=refersion&utm_medium=affiliate&utm_campaign=5612082.c38978
In the future I would like to share my creations with the audience here ranging from both simple woodturning ideas ideal for beginners but also more complex and artistic works for those like a bit of challenge. 😊
Please support my channel by subscribing and hit the notification bell button so you will not miss my future projects.
Thanks for watching and see you back soon for my next weekly video 😊
DISCLAIMER: Please do not solely rely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner and working with machinery and electricity can be dangerous however I try to share good practices, techniques and products what works for me. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
60
views