a

aukerkazmierskizqtv1013

AllVideosLiveAbout
    It is best not to widen the thread clearance.
    0:18

    It is best not to widen the thread clearance.

    So that the nut can have threads on the entire length of the nut.
    1 view
    The custom bolts I'm working on
    0:18

    The custom bolts I'm working on

    In this way, the hexagonal sleeve is processed at the head of the screw.
    The golden knob on the shelf looks beautiful.
    0:18

    The golden knob on the shelf looks beautiful.

    What are the advantages of single point thread cutting compared with the use of moulds?
    1 view
    During these initial cuts,
    0:18

    During these initial cuts,

    The cutter looks slightly ahead of the existing thread.
    1 view
    Start doing my little DIY job.
    0:18

    Start doing my little DIY job.

    It's always a good thing that work becomes a learning opportunity.
    1 view
    The original bolts seem to be broken and flattened.
    0:18

    The original bolts seem to be broken and flattened.

    It is planned to cut these bolts shorter.
    1 view
    Turning the chuck by hand is enough to eliminate the clearance in the gear train.
    0:18

    Turning the chuck by hand is enough to eliminate the clearance in the gear train.

    The nut got stuck on the thread conversion
    It is a pleasure to use such a compact, high-quality machine
    0:18

    It is a pleasure to use such a compact, high-quality machine

    Rotate the chuck slightly by hand and adjust the horizontal slider and top slider settings.
    There may be burrs on the nut
    0:18

    There may be burrs on the nut

    Align the right side of the tool with the right face of the existing thread.
    Single point thread chase on manual lathe
    0:18

    Single point thread chase on manual lathe

    I will show you my skills.
    1 view