PropStrikeFPV

@jamesskinner7641 ran his BMX up and down the pump track allow me to practice some close proximity chasing with the Shendrone Squirt running a GP11 Mini. Thanks for sharing your park. Great fun! #fpv #gopro11 #gyroflow #bmx #ottawa #greely

Got lucky, and I had to check the video, yep, through the wires.

My first iNav build. This pack tested out the ALT-HOLD and POS-HOLD. ALT-HOLD worked quite well, but POS-HOLD is a bit of an odd thing to experience and I bailed out as I didn't quite understand that my inputs were still somewhat respected and I need to center-out the sticks for POS-HOLD. I think it works, and it was a user issue.

Kaya still loves to chase drones, and every once in awhile she catches me when I let my guard down.

Stops at the Snow pile off Algoma, Hino Dealer, Snelling Paper near St Laurent Blvd., City Park Drive, LRT, Telesat from the Meadowbrook strip mall, Petro Canada Blair and Innes, Sleep Country, Big Al's, Multi Luminaire... Still experimenting with GoPro 11 settings, the stabilization has a pretty harsh stutter and I don't think I'll be using the built in stabilization any more. Screaming props muted, no audio sorry.

Very much like the Bando City map in Liftoff.

Taking advantage of beautiful sunlight on a cold January afternoon, the tattered Franco-Ontarian flag caught my eye.

just a cruise around the parking garage, testing range limits through steel reinforced concrete.

needed to burn off a few packs and found the skatepark empty.... mostly.

James was kind enough to be my chase subject (or victim) at the Blackburn Skateboard park today, September 11th 2022 while getting the feel for him new scooter. A few close calls, but the Shendrone Squirt drone is pretty safe and can be chooo'ed away like a big fly. We got about 3 battery packs in and what we have here today is the raw footage of those batteries. Let me know in the comments below if you'd like to be the subject of another chase type video at any of the local Skateboard parks.

Couldn't resist flying a pack in the early dawn "lake fog". ;)

Remember a time when you could drive up highway 309 in Quebec without having to detour north of Val-Des-Bois due to a bridge being out? Today we flew the DJI FPV over what remains of that bridge today to see what the heck is going on. Yep, the bridge is gone. @couillardconstruction #DJIFPV #BridgeRepair #HeavyEquipment

After a few weeks of building and awaiting parts, I was able to get out to get a feel for a 6S powered X-Class drone. Needs a bit of tuning with some bobbles, but for Betaflight defaults, it's flyable. All in about 8.3lbs. Frame TBS Source X Motors IFlight 4214 400KV SpeedyBee F7 FC APD 80F3[X] - 80A continuous ESC APD 8S 360A Power Distribution TBS Tracer DJI Air Unit HQ Prop 13x9x3 2x 6s 5200mah Lipos

Three different stops with no particular agenda. Just floating around with the Squirt and getting some shots. Place D'Orleans CanadianTire, Blair and Ogilvy Blair Mall, Movie theater

First attempt at chasing a ball throw for the neighbor's dog Artemis.

Last June Tim and Pierre were drinking beer and invite the Shendrone Squirt in to land. They were amused.

Taking advantage of some warmer weather to run a few test packs on a fresh-ish Shendrone Squirt build RunCam5 Orange is great at many things, low light is not one of those talents.

LiftOff Livestream Test #2.

Couldn't resist the nice weather and visited a few spots to knock the rust off. Some segments stabilized using GyroFlow; it can make things look odd at times, but overall improves stability where it's needed. Canadian Tire parking lot on Coventry. Labelle St. Louis-Riel Telesat Court.

Testing Live stream from LiftOff.

Had to get off the simulator today and decided to fly a pack at a few different venues. Turns out it was crazy windy and the Shendrone Squirt was bobbling pretty hard in the gusts. I had fun but didn't get too creative.

raw footage from my stop at the dam build in 1929-1930 over the "des Cedres" rapids just north of Notre-Dame-Du-Laus. More info on this dam: https://www.notre-dame-du-laus.ca/barrage-des-cedres

Part of the network of dams along the river Lievre, managed by Brookfield Evolugen, I was granted permission to the east side access road of the High Falls dam. High Falls dam, a 109MW facility with a date of 1929 (not sure if that's built, completed, or started generating). It's just enormous amount of concrete and a feat of engineering for the era. Very impressive facility.