MakeIt2020

New to all of this but I have plasma cut a 36" shadow box and figured out how to do some lighting. Looks cool to me.

Cows like the dog

Langmuir Crossfire pro, 1/8" steel, 80ipm, 42amps, 1.0 nozzle, 0.5 pierce delay, production cut of 20 taxidermy hangers

Big bear! 1m33sec to cut. 140ipm programmed

Finally getting my first cuts. 3/4 of the way through the program the arc was lost. I have no idea why. However I was able to figure out the resume from line command and it finished the cut flawlessly. Could not even tell it messed up. 14ga mild steel, RazorCut45 @45amps, 140 ipm, smoothing 0.0004, lead-in radius 0.0 in, 30 deg, distance 0.08, Pierce clearance, 0.055 in, Cut height 0.06 in, springboard 0.02 in, IHS (ON), Pierce delay 0.5, Pierce height 0.15 in, THC (OFF)

Full cut with FireControl straight line generator. Failed cut with all other programs.

Disappointing first day. Finally figured out the Fusion 360 programming errors I was creating and onlt cut one generic straight line using the straight line generator on the Firecontrol.

The coupler for the Torch on/off cable will not plug in. Yes I have indexed the plug and no the pins are not bent.

Lick Run Road parking area. Out of the gate you climb a doable 0.6miles. Doable, uncomfortable for me. I have not MTB'd in 10 years. On the way back it strings together a 0.93 mile mostly down hill cruise where the hardest part is not skiding through the turns. Im in my 40s pardon the grunting. Im closing my eyes and holding on because I feel like the tires are gonna squit out from under me. Riding a barely used 2016 Stumpjumper FSR stock. New tires ordered. The high volume (3.0") low pressure (20psi max) tires feel like you are riding through sand even on the flats.

Sometimes you just dont make the run. Im disappointed with the Specialized front tire. It's slated for replacement.

America spends the most on Healthcare, has the highest per capita rate of chronic disease and pharmaceutical are the 3rd leading cause of death behind heart disease and cancer.

AGM TS25-256. I was cleaning up with my headlamp on and looked up... went to the house and grabbed my thermal. 250,000+ miles away but can be seen with the Thermal.... I'm no scientist...... I have questions

Recently purchased an AGM TS25-256 thermal scope. Just out shooting a few rounds to see how things work. Shot a clay pigeon and 9x15 steel

The upper canopy got caught and the tree rotated on the cut. Its disconnected but wedged. I trimmed down the bottom but it still will not budge..... thanks Morther nature

These Guys do this a couple to times a week. Pretty cool. I always forget the jet is infront of the sound.

Man Cuts down surveillance camera erected pervious day in Yorkshire England. When the Governement wastes your money on Control let the Government know you are Un-Gov-ernable

Follow on Rumble - https://rumble.com/c/HodgeTwins Original - https://youtu.be/r34NPk39kM0

So what's the point of being robbed $60/week for 50 years. If All I get is 6 Years of "help"... I would rather Pay $20,000 for REAL Finacial Education and Keep the other $300,000 that the big gov steals.

I should have shut the saw off when I dropped it. The sound when it bounced off the ground was impressive. Beautiful day to be outside

This tree had to come down due to damage from Ash boring beetle which has damaged most of the Midwest. Im putting a camp area down here and did not want to chance any death.

Original uploaders Video Link https://youtu.be/xjt3VFJdm0E

Things to consider Original Video this was clipped from. https://odysee.com/@corbettreport:0/seq1:f James Corbet. Easy way to open your eyes if you are realizing something does not small right

This rifle at a bolt catch that was not working. The actual problem was the buffer. This Frankenstien rifle had a rifle buffer in a Carbine length buffer tube. The carbine buffer is considerably shorter and the bottle was short stroking not going back far enough for the bolt catch to catch the bolt face.

Received this AR10 incomplete. Used a lower parts kit to put it back together. Lots of discover for me. I did not know AR10s use a tiny screw instead of a roll pin for the bolt catch. This ine was stripped. BTW bolt catches are made from hardened steel. In order to drill through that I had to use a masinary bit. None of my other bits would bite. The firearm had a rifle length buffer in a Carbine length buffer tube. This was a good education.