MakeIt2020

New to me Japanese Motor installed. Working no check Engine Lights

Items sent in the link yesterday so that you can build multiple, give useful gifts, or get started.

My feed is not in chronological order. It also repeats videos at random. All I want is my feed. With my subscriptions I order of their respective upload times. That's all I'm asking. Anyone else?

Pistons out Cylinder 1 has a bad bearing all others okay

Driving through Colorado Rockies the weather turned and roads got icy. Decided to stop and camp rather than risk the drive off the mountain. Took 18 minutes to put the tent up the wind is not apparent in the video bit it was wiping pretty good. The tent normally takes about 6-7 minutes to set up. Marmot Tungsten. Tent. Forgot my camp hammer and found a piece of grant I used to put the stakes in the ground.

Had to replace my 2005 Subaru Outback engine. Bought a JDM (Japanese Engine) from am import shop about 2 hours away. They put it in the Nissan Rouge I borrowed with a fork lift. My plan was to slide the engine out on the plywood I laydown. Then use the cherry picker. Well that did not work out. But I got it.

Well over 100 State Troopers and NG standing outside. Probably closer to 200.

IV8888 AK-V 9mm with Echo trigger

2009 Subaru Forester EJ253. Checking coil voltage at the coil connector.

I show the problem, the design phase, printing the part and how the solutions worked all in this video. I had a problem with my Reloading press (Hornady LNL Ammo Plant) dropping brass before I would get to the shell plate. 100% success with this print.

Nearly completed, reloading tray I designed. Large holes handle 308 and similar, smaller holes handle 5.56 and similar. Tray up front is to hold bullets

Our Tradition is to get a tree together. We have been getting a tree every year since she was 18 months old. Last 3 years she has done all the work herself.

Been wanted to do this for over a year. For whatever reason this pan is slick and the lip bends just right. Its was fun

Every work on a car and forget something. Yep me too.

You ever work on a car and forget something at the store... yep me too

Taking mufflers off. The last bolt on the bumper core did not brake but it was really loud coming off. The sound was echoing down the street. Unfortunately the video does not do the sounds justice.

Little silicone spray goes a long way to keep you seals from sticking on icy days. Spray on a paper towel or rag and wipe down all the seals

Recently purchased this 2009 Forester. Parking brake not working very well. Initially would hold car in driveway but not anymore. I checked the parking brake its completely gone. Had to order new hardware kit. No one locally had it in stock.

Washer jug fill neck is cracked

Cura list this as a 27 hour Print. My sample took 2h30m.