JohnnyWheelz

I purchased my first gen Colorado with a ton of rust and good amounts of frame damage, so I decided to tackle it myself and I’m very happy w the outcome. Lots of sanding, grinding cleaning and welding, I used Rust Seal paint, similar to POR (paint over rust) 15, Detroit axle shocks, Precut eBay tints which got messed up 2 months later, 2 part Epoxy to repair the holes on the bumper, Rattle can primer and black paint. Second Gen side steps eBay, Ram 1500 Tyger sport bar craigslist, used, HarborFreight 8” light bars, Disclaimer; I have ZERO (0) affiliation with any of the products or suppliers listed above, just listed them in case someone would like to use for a similar project.

I purchased my first gen Colorado with a ton of rust and good amounts of frame damage, so I decided to tackle it myself and I’m very happy w the outcome. Lots of sanding, grinding cleaning and welding, I used Rust Seal paint, similar to POR (paint over rust) 15, Detroit axle shocks, Precut eBay tints which got messed up 2 months later, 2 part Epoxy to repair the holes on the bumper, Rattle can primer and black paint. Second Gen side steps eBay, Ram 1500 Tyger sport bar craigslist, used, HarborFreight 8” light bars, Disclaimer; I have ZERO (0) affiliation with any of the products or suppliers listed above, just listed them in case someone would like to use for a similar project.

Custom made roof rack using 3/4” electrical conduit.

Sand, strip, clean and paint. Used Raptor Liner Army Green (which is same as the olive drab green) and Black.

Older Gem car with new DeltaQ charger and how interlock works. This charger does not come with installation instructions and how to connect the interlock wires because this charger is used in some different applications and one connection does not apply to all.