DF5152

This is a modified quick attach plate to adapt a BXpanded plow so it does not have to attach to a bucket. Before the plow stuck out even Further as it was attached to the bucket. That used to be necessary for me because I didn't have quick attach. The bucket used to pin on. Now by adapting a quick attach plate I can use the plow independent of the bucket. It shortens up the whole tractor making it a little more maneuverable. I hope it gives you some Ideas. The plate cost me $100.00 from eBay and the rest was made with scrap material I had. I used a spray transfer method to weld the 1/2" plate to the 3/8 angle. I fabricated some tabs on the back side to be able to bolt it to the BXpanded frame work. The quick attach plate can easily be remove if I ever needed to attach it back to the bucket. We haven't had any real snow here in a while at least since I purchased the snow blower 2 years ago. Which is why I said this will probably ensure we get no snow in the near future. Later all.