Ole Blue Rescue

So here in the US, making a car meet the standards we require here in the US can be a tad challenging. With that said, I am not a wiring Guru or any of the sort. I don't know if in my state (Mississippi) I would get pulled over for not having the turn lights as running lights? Either way I am learning as I go along. I was able to do some research and upon that, I posted on an Evo IV Facebook Forum and someone responded! This very mod I should've realized before now, as Jafro has done this same conversion to TradeYa on his channel. Either way, I was able to cobble together some cheap Amazon parts for testing as shown in this video. Figured out what needs done and now I am going get OEM parts out of the junkyard (wreckers on the other side of the pond). I will be Snagging 1157 pigtails, as well as a few other odds and ends the Evo needs. I might get a few parts for Ole Blue too while I am there. Not a long one, once I get all the parts I will make the second video and show you guys how it works after I am done making this modification.

So Ole Blue is getting cleaned up to get a few mods I have been having for her quite some time. 8 years of dust wasn't as bad as I thought to remove with just a garden hose. Much more coming, gathering parts here is a short to hold you over while I make more content. Stay TUBED, please like comment and subscribe! Share this video!

Here I reveal the true fate of Ole blue, The Evo gets a little more room to stretch out and be cozy. I also reveal a few other things in this video, watch to the end! There is a good bit going on in this video 28GB worth! Thanks for stopping by please like comment and subscribe!

So it was time the Evo got the Garage spot it deserves and Ole Blue get out! I need Ole Blue out so I can actually work on the car for one. Two the car's fate for now is safe but that might change. Man this video took a while to make this is 3.5 hours of footage. Enjoy folks, stay tubed!

Shout out to @Jafromobile for being one of my main inspirations for loving Mitsubishi's even more, and actually building one. Well two, I am going to build two for now more coming later. Hope you guys enjoy some of the main points I should've added in the last video. I guess this video will fill in those gaps? we shall see. I am also on Rumble! Hope you guys enjoy this video, while I reload for another video this weekend hopefully.

So finally got the trans installed, suspension put back together. The car is still mostly factory, 27 year old parts especially suspension parts will for sure get replaced. I didn't plan for this process to take nearly this long, but I have learned A LOT. I still have tons of other mods I had to put on hold due to this clutch failure. I am stoked to get this car back on the road finally. Haven't driven it since JANUARY! That is just too long, enjoy the video! Love you guys and thanks for watching. Do all the things so YouTube will put this video in front of more eyeballs. I am RUMBLE as well! Every video on YouTube is on Rumble.

So in the video no thanks to PStuning, I was able to acquire the correct Clutch/Flywheel kit from MAPerformance an actual customer service oriented company that legit cars about their customers. Back on task, I am really close to reassembly fluids and then road test! The next video is already in the making. Should be next weekend or maybe some time after that I have this car back on the road. I have a lot of other parts that need installed. I will be making an unboxing video, soon as well to show what is coming. Thanks for stopping by, please LIKE COMMENT and SUBSCRIBE and hit that notification bell. So that when I upload anything you guys will get notified. Love y'all see ya on the next one! ***Patreon link is here! https://www.patreon.com/user?u=5599840 Social Media Links - Instagram: https://www.instagram.com/boostedcajun/ - Rumble: https://rumble.com/c/c-1708282 Why this channel exists JAFROMOBILE: https://youtu.be/fqLyXo4jwJs Equipment I use - Camera I use: GoPro Hero 8: https://gopro.com/en/us/shop/cameras/... - Merch...eventually - Future Merch HQ: http://www.4g63swapped.com/ Parts in this video: THANK YOU MAPerformance - MonoLoc: https://www.maperformance.com/products/act-monoloc-one-piece-collar-pull-type-clutches-884006p - Clutch/Pressure Plate: https://www.maperformance.com/products/act-hd-pressure-plate-performance-disc-clutch-kit-mitsubishi-evo-8-9-me2-hdss - Flywheel: https://www.maperformance.com/products/act-street-lite-flywheel-2003-2006-mitsubishi-evolution-viii-ix-600205 Where I buy parts: https://www.rockauto.com/ https://www.ebay.com/ https://www.amazon.com/ref=nav_logo https://www.maperformance.com/ https://stmtuned.com/

So, sorry it's been so long since I posted anything. With work life and most importantly family to support. I have had little to no time to dedicate to making more videos. In this video is a tear down of the Evo, and a glimpse into what it takes to do a clutch job. Spoiler alert! it will not be completed in this video. I have another video on the burner now, getting that ready for production and I will have that out to you guys as soon as I can. Thanks for the 72 of you that have subscribed and watch all my videos. Trust much more is coming!! Merch for sale soon...maybe ***Patreon link is here! https://www.patreon.com/user?u=5599840 Social Media Links - Instagram: https://www.instagram.com/boostedcajun/ - Rumble: https://rumble.com/c/c-1708282 Why this channel exists JAFROMOBILE: https://youtu.be/fqLyXo4jwJs Equipment I use - Camera I use: GoPro Hero 8: https://gopro.com/en/us/shop/cameras/... - Merch...eventually - Future Merch HQ: http://www.4g63swapped.com/ Where I buy parts: https://www.rockauto.com/ https://www.ebay.com/ https://www.amazon.com/ref=nav_logo https://www.maperformance.com/ https://stmtuned.com/ https://www.maperformance.com/

So....The clutch bit the dust, I surely contributed but the previous owner I think didn't install a proper clutch in 2020 when it was claimed to have been changed. Moving forward I am putting a new clutch and flywheel and a few other parts you'll have to keep watching to see what else I do to Dale to Americanize it to make it more of a daily driver. ***Patreon link is here! https://www.patreon.com/user?u=5599840 Social Media Links - Instagram: https://www.instagram.com/boostedcajun/ - Rumble: https://rumble.com/c/c-1708282 Why this channel exists JAFROMOBILE: https://youtu.be/fqLyXo4jwJs Equipment I use - Camera I use: GoPro Hero 8: https://gopro.com/en/us/shop/cameras/... - Merch...eventually - Future Merch HQ: http://www.4g63swapped.com/ Where I buy parts: https://www.rockauto.com/ https://www.ebay.com/ https://www.amazon.com/ref=nav_logo https://www.maperformance.com/ https://stmtuned.com/

The install is almost done in this video, still some things I need done before I call it done. I am still waiting on my windshield bracket to come in, and some final wiring (Parts) that will not change. The final wiring and review will be in the next part, this will show you how it looks and functions as well as my thoughts on the smart mirror. Thanks for stopping by, another video is in the works as this is uploading! ***Patreon link is here! https://www.patreon.com/user?u=5599840 ***Parts installed in this video Smart Mirror: https://www.amazon.com/gp/product/B09C1QVYHM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 Social Media Links - Instagram: https://www.instagram.com/boostedcajun/ - Rumble: https://rumble.com/c/c-1708282 Why this channel exists JAFROMOBILE: https://youtu.be/fqLyXo4jwJs Equipment I use - Camera I use: GoPro Hero 8: https://gopro.com/en/us/shop/cameras/... - Merch...eventually - Future Merch HQ: http://www.4g63swapped.com/ Where I buy parts: https://www.rockauto.com/ https://www.ebay.com/ https://www.amazon.com/ref=nav_logo

Just a short video of the fitment, I gave Warren the dimensions and viola he made the brackets with a 3D printer for test fitment. Tested it made a few tweaks after we made a few more measurements, and now they fit perfectly! Can't wait to bolt these bad boys on for the final time! That is coming soon!

So this is me deciding to go ahead with the smart Mirror install, as you can see it took me a while to make my mind up on how to install the Mirror. It was a ton of trial and error, trying to do the absolute cleanest install I can possibly do. Rivnuts and painters tape are your friend for sure. Hope you guys had a Merry Christmas and Happy New Year! Part 2 is being editing as this video goes up! So stay Tuned folks :-) ***Patreon link is here! https://www.patreon.com/user?u=5599840 ***Parts installed in this video Smart Mirror: https://www.amazon.com/gp/product/B09C1QVYHM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 Social Media Links - Instagram: https://www.instagram.com/boostedcajun/ - Rumble: https://rumble.com/c/c-1708282 Why this channel exists JAFROMOBILE: https://youtu.be/fqLyXo4jwJs Equipment I use - Camera I use: GoPro Hero 8: https://gopro.com/en/us/shop/cameras/... - Merch...eventually - Future Merch HQ: http://www.4g63swapped.com/ Where I buy parts: https://www.rockauto.com/ https://www.ebay.com/ https://www.amazon.com/ref=nav_logo

In this video, I perform an oil change with a new oil I have never used before. I have seen countless DSM, CSM, Honda guys swear by this oil. So I figured, why not give it a shot? Also, I am in the process of putting a smart mirror in the Evo. As I demonstrate in the video, I can't really see out of the back glass at all due to the tint. So I am in the process (waiting on parts to arrive) of installing the smart rear view mirror. I also show the intercooler this car has, and a few little things it needs that were neglected under the car. ***Patreon link is here! https://www.patreon.com/user?u=5599840 ***Parts installed in this video Oil I used: https://www.amazon.com/gp/product/B00DJ4FMK2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Oil Filters: https://www.ebay.com/itm/261596128623 Smart Mirror: https://www.amazon.com/gp/product/B09C1QVYHM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 Social Media Links - Instagram: https://www.instagram.com/boostedcajun/ - Rumble: https://rumble.com/c/c-1708282 Why this channel exists JAFROMOBILE: https://youtu.be/fqLyXo4jwJs Equipment I use - Camera I use: GoPro Hero 8: https://gopro.com/en/us/shop/cameras/... Merch...eventually - Future Merch HQ: http://www.4g63swapped.com/ Where I buy parts: https://www.rockauto.com/ https://www.ebay.com/ https://www.amazon.com/ref=nav_logo

So, I have a few more things I ordered and wanted to install on the car. These are upgrades that to me, just make the car look more sorted, typically I prefer OEM plus, but certain things I am willing to bend and add to the car. In this video we do some dope ass Hood Struts, and valve cover bolts, both of which make the car more mine. I still have a bunch of function things I want to do to the car. Americanize it for our roads here, you'll see what I mean in the coming videos. The car is called Dale, not Dale the Evo btw. Watch the video until the end, I will explain why I named the car that. ***Patreon link is here! https://www.patreon.com/user?u=5599840 ***Parts installed in this video - HoodStruts--shorturl.at/aGW67 - Valve Cover Bolts-- https://www.ebay.com/itm/190631391129 ***Social Media Links - Instagram: https://www.instagram.com/boostedcajun/ ***Why this channel exists JAFROMOBILE: https://youtu.be/fqLyXo4jwJs ***Equipment I use - Camera I use: GoPro Hero 8: https://gopro.com/en/us/shop/cameras/... Merch...eventually - Future Merch HQ: http://www.4g63swapped.com/ RockAuto Where I buy parts: https://www.rockauto.com/

OK, so they are few aesthetics I am changing about the car. I am essentially make the car mine, I don't want the car the stay the same. I am going to make quite a few changes here in the next few months. Hopefully I can have the wheels redone in their factory shade of silver with new center caps. As for the calipers and valve cover; those are changing too. I have decided on a color for those two items yet. The outside is going to get a refresh, paint is on the table, there are a few other areas that have peeling clear. The car was wrapped at one time, and has a few spots the where the wrap has pulled the clear off the car. So, it needs some TLC, it will get it. Lastly, YES! Ole Blue is still going to get some love, I have a few things coming together for that car as speak. I filmed this on my iPhone so it's not my normal way of filming. More content on the way so stayed tuned folks! Music by: @Agufish Patreon link is here! https://www.patreon.com/user?u=5599840 - Instagram: https://www.instagram.com/boostedcajun/ - Why this channel exists JAFROMOBILE: https://youtu.be/fqLyXo4jwJs - Camera I use: GoPro Hero 8: https://gopro.com/en/us/shop/cameras/... - Future Merch HQ: http://www.4g63swapped.com/ - Where I buy parts: https://www.rockauto.com/ ***Rock Auto Discount Code (Expires: 11 Dec 22): 218508230180669257

Well, I have been trying to get this particular vehicle since I was 19 years old. I am 40 now, so it's been a long time coming for sure. What car did I get exactly? A 1996 Lancer Evolution GSR, 1 of 1532 Evo IVs equipped with the factory sunroof and out of those only 480 were finished in Steel Silver Metallic. She isn't stock either, she has a few goodies I will go over with you guys. Overall I am so stoked! I do have parts coming in for it already, and yes Ole Blue is still getting built, I need a backup for my Hyundai. I drive the Evo to work a few days a week.

In this video, I finally get to install the 89Mirageman rear DSM disc brake conversion. I also install Civic rear steel braided brake lines to replace the steel and rubber factor brake lines. Well at least on the drivers side, I was able to get this install completed with a few complications, but I was able to adapter and over come those issues. This kit looks so very good, I have a few more goodies coming soon to add to this kit. This car will go AWD one day, I hope to work with NattyFab to have a custom rear end setup from an Evo 8 or DSM. Until then the goal is to get her up and running, work all the bugs out and improve the driveability and dependability of this car. My goal is to have this car running and driving by Cruising the Coast 2023! Love you guys! Please like comment share and subscribe and hit that notification bell, so you'll know when the next video drops. Use my Rock Auto Discount Code below to save 5% on your next purchase on Rock Auto. - Patreon link is here! https://www.patreon.com/user?u=5599840 - Instagram: https://www.instagram.com/boostedcajun/ - Why this channel exists JAFROMOBILE: https://youtu.be/fqLyXo4jwJs Camera I use: GoPro Hero 8: https://gopro.com/en/us/shop/cameras/... - Future Merch HQ: http://www.4g63swapped.com/ - Where I buy parts: https://www.rockauto.com/ Rock Auto Discount Code (Expires: 11 Dec 22): 218508230180669257

In this video, I showcase parts that I am going to add to Ole Blue. I have been waiting on the rear disc brake kit, rotors, steel braided hoses, calipers etc. I am the last one to get this kit, as it is no longer made. 89Mirageman AKA Chris Pearson, made the last DSM 258mm rear disc brake kit for me. Sorry this video is quite a bit shorter than what you guys would've liked. I promise you more is coming. Thanks for stopping by! Please like comment share and click that notification bell, so you can see when I upload my next video. Love you guys!! See y'all! - Patreon link is here! https://www.patreon.com/user?u=5599840 - Instagram: https://www.instagram.com/boostedcajun/ - Why this channel exists JAFROMOBILE: https://youtu.be/fqLyXo4jwJs Camera I use: GoPro Hero 8: https://gopro.com/en/us/shop/cameras/... - Future Merch HQ: http://www.4g63swapped.com/ - Where I buy parts: https://www.rockauto.com/ Rock Auto Discount Code (Expires: 11 Dec 22): 218508230180669257

Here we organize and get ready for things to come. This has been a long time coming. As always I have some Agufish music in this video. Check Hunter aka Agufish linked below. My Merch HQ site and Pateron links are below. If you want to help me build this car, if not? That is fine too, just glad you stopped by to check out this project. Thanks again for stopping by! - Instagram: https://www.instagram.com/boostedcajun/ - Why this channel exists JAFROMOBILE: https://youtu.be/fqLyXo4jwJs - Agufush Channel: https://youtu.be/K4pqB4bfE1c Hunter's music is dope!!! - GoPro Hero 8: https://gopro.com/en/us/shop/cameras/hero8-black/CHDHX-801-master.html - Future Merch HQ: http://www.4g63swapped.com/ - My Pateron link: https://www.patreon.com/join/8022851/checkout?ru=undefined - Where I buy parts: https://www.rockauto.com/

So, this video will show how to repair a rear caliper on a 2014 Hyundai Genesis R Spec 5.0 Rspec. Mine failed out of the blue, upon failure the car would make a horrible scraping noise....I had to drive it from Louisiana to Mississippi, and to work until the parts would come in (Memorial day weekend). This demonstrates, how to change the caliper clamp off the brake whose with those plastic adjustable pliers. I didn't have to bleed the caliper at all! Those little red pliers are a Godsend, being able to clamp the brake lines so bleeding the caliper or the whole brake system isn't required? Priceless! I have a little bit of different format on this video, no intro or outro in the video. Might add them back? Might not, let me know what you guys think. Parts I used and where I bought them from are listed below. Rotor: https://www.carparts.com/details/Hyundai/Genesis/Raybestos/Brake_Disc/2014/5-dot-0_R-Spec/8_Cyl_5-dot-0L/RAY980708.html Caliper: https://www.amazon.com/gp/product/B082YK1H3Y/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Hose Clamp Pliers: https://www.amazon.com/gp/product/B08H85NN64/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Music by: Agufish -- https://www.youtube.com/watch?v=SxT2Mu11JNc Instagram:@BoostedCajun

Another cooking video, yes yes I know. We will get back to the car content when what I have planned comes to fruition. Thank you guys being patient with me. I hope you guys can enjoy some other things to get our mind off the world right now. Cooking is one of the things that draws me in and gets my mind off of the world; cars too obviously a little more so. They both take me out of the world for the time; working on them allows me to focus on things I can control. Despite where you land politically? I DON'T CARE! If you know me? You know where I stand politically. So, let's enjoy some Jalapeño pork beef hamburgers and cheese infused hot dogs. I also have some wonderful adult beverages to help aid in the hot temperature outside (it was 104 degrees Fahrenheit today!) with the heat index. Please like comment share and subscribe!! Love you guys! #BoostedCajun #ChampagnesSausage #CantGetThisMeatinMississippi #GahDeyDawh #NonkKevsSeasoning

No car content this time, sorry. Planning some things so we can get back to the car. With starting my new job, and life the car unfortunately has to be on the back burner for now. Don't worry we will get back to the car content soon! Just another little sneak peak of my BBQ'ing some things for my family.

I know my videos have been a little further apart now, as this video explains I am starting a new chapter in my life. I am starting a new job tomorrow 23 May 22. So, with that said this video will show a mistake I made while trying to rebuild my rear DSM calipers. Unfortunately one caliper took one for the team. I am going to try and get more videos for you guys, as I have parts coming in soon, and new parts that I have been wanting to get for this chassis since I got it many years ago. No this project isn't for sale, at times I get frustrated not being able to get more done with the car. Money is really the only obstacle in my way of getting this car back on the road where she belongs. I am sure many of you feel the same way at times with projects. - Patreon link is here! https://www.patreon.com/user?u=5599840 - Instagram: https://www.instagram.com/boostedcajun/ - Why this channel exists JAFROMOBILE: https://youtu.be/fqLyXo4jwJs - Music provided by Agufish Channel: https://youtu.be/K4pqB4bfE1c - GoPro Hero 8: https://gopro.com/en/us/shop/cameras/... - Future Merch HQ: http://www.4g63swapped.com/ - Where I buy parts: https://www.rockauto.com/

So no more progress on Ole Blue, so we'll cook while we wait for more parts and progress on that to happen. I show you guys how I BBQ some Drunkin' Chickens, and show the finished product. Don't worry more Ole Blue content is coming, been busy starting a new chapter in my life (JOB). So, bare with me as we get more things going for Ole Blue. - Why this channel exists JAFROMOBILE: https://youtu.be/fqLyXo4jwJs - Music by Agufush : https://youtu.be/K4pqB4bfE1c - GoPro Hero 8: https://gopro.com/en/us/shop/cameras/hero8-black/CHDHX-801-master.html - Future Merch HQ: http://www.4g63swapped.com/ - My Pateron link: https://www.patreon.com/join/8022851/checkout?ru=undefined - Where I buy parts: https://www.rockauto.com/