TriggerShims

Remove and Re-Install Ruger DA Mainspring from a Ruger Super Redhawk. This method can also be used on the Ruger SP101, GP100, Redhawk, Blackhawk, Most Single Action Revolvers with Coil Mainsprings, and Ruger 10/22 among others. Wolff Spring Kits Available at http://www.TriggerShims.com/

Hi Folks, Lance here from http://www.TriggerShims.com In this video, I check the Trigger Pull on a Brand New Out-of-Box 10/22 Charger using a RCBS Trigger Pull Gauge. The average Trigger Pull on this gun was quite good for stock, 4 pounds 4 ounces I also have a Complete Tear-Down and Reassembly Video of this Trigger Assembly; Ruger 1022 Trigger Tear Down Video Part I at; http://youtu.be/Jsry8fvIRc0 and Ruger 1022 Trigger Reassembly Video Part II at; http://youtu.be/OIsQALxLk24

In this video, I disassemble and reassemble a Ruger 77/357 Bolt, showing how to install Bolt Shims from http://TriggerShims.com/ At 3:40 I also show how to Unlock a Bolt if the Bolt Sleeve is Accidentally Turned CCW and the Cocking Piece drops into the Fired Position. Bolt Shims may be installed to Remove Excessive Play between the Bolt Halves when the Bolt is in Battery, giving a More Consistent Seating of the Cartridge. This is a quick video companion to my full length Ruger 77/22 and 77/17 Bolt Shim Installation Video

This Video from http://www.TriggerShims.com shows the Installation of a Wolff Blitzschnell Striker Spring used on a Ruger 77/22 or 77/17 Hornet Shows How Striker is Disassembled using the Menck Bolt Tool Part # R&RBT The Striker Spring is part of a Wolff 30375 Spring Kit for the 77/22 and 77/17 This Spring Kit and the Bolt Tool are Available at http://www.triggershims.com/

I install a Wolff Non-Captive Guide Rod and Recoil Spring set in a Glock 17. I also install a New Striker Spring, and Show Removal of the Extractor. This Guide Rod Kit and other Wolff Springs are available at http://TriggerShims.com/​ We manufacture an extensive line of Gun Shims for Pistols, Revolvers, Rifles and AR Shims and sell a full line of Popular Wolff Gun Spring Paks.

I install a Wolff 13 Pound Recoil Spring Set in a Ruger LCP .380 The Wolff Extra Power Recoil Spring set can reduce your felt recoil, allows fasted follow-up, and improves function with Heavy Loads. Also reduces the wear on your gun over the 9 pound factory spring. Available at http://triggershims.com/ I also have the same kits for the Kel-Tec P-3AT