Ruger Double Action Revolver Hammer Shim Installation
I Show How to Measure and Install Hammer Shims in a Ruger Double Action Revolver.
This includes the Ruger SP101, GP100, Redhawk, Super Redhawk and Alaskan.
Installing Shims on both sides of the Hammer will keep it Centered and Will Stop Most of the Scuffing and Scratches on the Hammer from Rubbing Against the Frame.
This will also Improve Smoothness of Hammer Operation and Pull, and will give More Reliable Ignition.
The same technique is used to measure for Trigger Shims.
TriggerShims Brand manufactures Hammer, Trigger, Hammer Dog and Cylinder/Endshake Shims for Ruger Double Action Revolvers, and are available at http://www.TriggerShims.com/
Hammer Shims are here - http://www.triggershims.com/ruger_dou...
22.3K
views
Ruger Super RedHawk Alaskan Shim Installation
In this Video, I Install both Hammer Shims and Hammer Dog Shims in a Ruger Super RedHawk Alaskan Revolver in .480 Ruger
These parts are available at http://triggershims.com/
Hammer Shims reduce friction caused by the Hammer Rubbing the Frame
Hammer Dog Shims can Improve the Double Action Trigger Pull by keeping the Hammer Dog Properly Aligned.
I show the proper way to measure for the Hammer Dog Shims at 8:00 Minutes in the video.
I also Install a Wolff Reduced Power 11 Pound Hammer Spring to reduce the Trigger Pull Weight.
The Factory Hammer Spring Rating on this Revolver is 14 Pounds
Shively Sales manufactures Gun Shims under the TriggerShims Brand Name.
22.3K
views
Ruger SP101 Double Action Revolver Shim Kit Installation
How to Install a http://www.TriggerShims.com Brand Shim Kit in a Ruger Double Action Revolver including a SP101, GP100, Redhawk and Ruger Super Redhawk
We also Install a Wolff Gunsprings Reduced Power Shooters Pak.
TriggerShims Manufactures Hammer and Trigger Shims, Hammer Dog and Cylinder Endshake Shims for Ruger Double Action Revolvers.
These Upgrades are used by many Competition Shooters and are Available at http://www.triggershims.com/
I show how to hone the Shims at 3:40
22.3K
views
1
comment
Ruger 77/22 and 77/17 Bolt Shim Installation - Our Original 77/22 Bolt Shims
This Video from http://www.TriggerShims.com shows the Basic Installation of the Bolt Shims used on a Ruger 77/22 or 77/17 Rifles
Including .17 WSM, .17 HMR, .22 Long Rifle, .22 Magnum, .22 Hornet, .357 Magnum, & .44 Magnum
These Bolt Shims will also work on the 2 piece bolts used in the 77/357 and 77/44 Rifles.
Installing Bolt Shims can increase accuracy and can cure FTF from Light Strikes.
These Shims are Available at http://www.triggershims.com/
16.4K
views
Ruger American Rimfire Rifle Trigger Shims - Installation Instructions
TriggerShims.com Instructional Video -
Ruger American Rifle Shims will give a Smooth Trigger Pull by Centering Your Trigger in the Housing and Eliminating Frame Rub and Friction
In this Video, I show how to measure and install the proper thickness shims.
The shim kit in this video is available at https://www.triggershims.com/ruger_american_rifle.html
You can watch the follow up video here - https://triggershims.com/ruger_american_rifle.php
TriggerShims Brand is a small cottage industry and we manufacture an extensive line of Firearm Specific Gun Shims
7.21K
views
Ruger American Rifle Trigger Pull Check
TriggerShims.com Instructional Video -
Checking the Trigger Pull on the Ruger American Rimfire Rifle.
I discuss the work I have done to this rifle trigger, following the thought that Consistency Builds Accuracy, we check the trigger pull weight and consistency.
Trigger Shims for the Ruger American Rifle are available at https://www.triggershims.com/ruger_american_rifle.html
www.triggershims.com manufactures a wide selection of Gun Shims for Rifles and Handguns
This is a follow up video of the original Ruger American Rimfire Rifle Trigger Shims - Installation Instructions video found here;
https://youtu.be/7AsTUYPHqes or on our YouTube Page at
https://www.youtube.com/TriggerShims
TriggerShims Brand is a small cottage industry and we manufacture an extensive line of Firearm Specific Gun Shims
5.78K
views
Ruger American Rifle .450 Bushmaster Trigger Shim Installation
TriggerShims.com Instructional Video - Ruger American Rifle Trigger Job
Ruger American Rifle Shims will give a Smooth Trigger Pull by Centering Your Trigger in the Housing and Eliminating Frame Rub and Friction
In this Video, I show how to measure and install the proper thickness shims, polish the Trigger and Trigger Housing.
The shim kit in this video is available at https://www.triggershims.com/ruger_am...
TriggerShims Brand is a small cottage industry and we manufacture an extensive line of Firearm Specific Gun Shims
5.75K
views
Ruger New Model Blackhawk Shim Kit Installation
How To Fit and Install a http://www.TriggerShims.com Brand Shim Kit in a
New Model Ruger Single Action.
This Video Applies to the Single Six, Blackhawk, Bisley and Vaquero.
The Gun Featured in this Video is a New Model Flat-Top Blackhawk in .44 Special
This kit is available at http://www.TriggerShims.com/
3.44K
views
Ruger 10/22 Trigger Shim Kit Installation Instructions - Original TriggerShims Kits
How To Install a http://www.TriggerShims.com Brand Shim Kit in your Ruger 10/22
Shows how to install the TriggerShims #10/22-8SS 8 Piece Shim Kit
Our Ruger 10/22 Trigger Shim Kits will remove side play found in stock and custom trigger assemblies, will stop the trigger from rubbing the trigger housing and smooth the trigger pull, correctly centering the Hammer, Disconnector, Sear and Trigger, possibly improving accuracy.
Also shows how to Remove and Reassemble the Hammer, Trigger, Sear, Disconnector, Bolt Release and Magazine Release.
Shows how to install the Wolff Gunsprings 18076 10/22 Reduced Power Rifle Tune-Up Pak
Shows how to Install the Volquartsen VC10BR Automatic Bolt Release and the Volquartsen VC10MR Extended Magazine Release
Video is presented by Lance C. Shively - Owner of TriggerShims.com and Manufacturer of TriggerShims Brand Trigger Shim Kits
This kit is available at http://www.TriggerShims.com/
1.75K
views
T/C R22 Thompson Center 22 Trigger Kit
Hi Folks, Lance here from http://www.TriggerShims.com
In this video, I install a Volquartsen Target Hammer Kit # VC10TH along with a TriggerShims Brand Shims and a Volquartsen # VC10TT in a Thompson Center T/CR22 .22 Rifle
Trigger Pull was measured after installation at 2 pounds 2 ounces, a huge improvement.
TriggerShims.com Manufacturers Trigger and Hammer Shim Kits
This kit is available at http://www.TriggerShims.com/
1.11K
views
AR-15 .22 Caliber Upper Receiver Assembly Video
Hi Folks, Lance here from http://www.TriggerShims.com
In this How To Video I Assemble a Dedicated .22 Caliber Upper Receiver for my AR-15 using a CMMG .22 Caliber Bravo Model SS Conversion Kit with 25 Round Magazine, a CMMG WASP M4 Contour .22 LR Barrel with 1:16 Twist, a UTG Pro Full Float Hand Guard and UTG Pro Quad Rail Gas Block, and a DPMS A1 Flash Hider.
I mount this Upper Receiver on my old stand-by Olympic Arms "Live Free or Die" Lower Receiver which has a UTG Pro 6 Position Mil-Spec M4/AR15 Collapsible Stock.
I have had this gun for a year now, and I wanted to do this video to show how easy it was to assemble a Dedicated .22 Cal AR-15 Upper.
The CMMG Conversion has worked flawlessly for me and the CMMG WASP Barrel is quite accurate. The whole thing is topped off with a Rimfire Optimized Nikon P-22 2-7X32 with BDC 150 Reticle that not only looks good with the matching AR Platform Rings, but is clear and easy to use.
I have had so much fun with this gun that it has achieved Favorite Gun Status in my book.
If you talk to the folks at CMMG or Nikon, tell them Lance sent you, and I Promise that their products would not disappoint.
For all your Gun Shim Needs, stop by and see me at TriggerShims.com
759
views
Ruger 10/22 Rimfire Extractor Installation
How to Install a 10/22 Volquartsen Exact Edge Extractor
In this Video, We Install a Replacement Rimfire Shell Extractor in a Ruger 10/22 Rifle @ https://www.triggershims.com/
Manufactured through an EDM Process
to Produce Exacting Tolerances
Made of A2 Tool Steel Hardened to Rc 58-60
The Hook is .005" Closer to the Rim of the Cartridge to Allow for the Most Positive Extraction Available!
Will Not Lose It's Edge Under Impact
Solves Jamming and Stove Pipe Issues
Another Must-Have for 10/22, 22/45 and MkI MkII MkIII Owners!
Also Fits ~ Thompson/Center T/CR22
428
views
Ruger 10/22 Volquartsen Auto Bolt Release
How to Install a Volquartsen Automatic Bolt Release or any Brand of Automatic Bolt Release in a Ruger 10/22
Volquartsen Automatic Bolt Release available at http://www.TriggerShims.com/
418
views
3
comments
10/22 Auto Bolt Release and Extended Magazine Release Installation
Installation Instructions for the Ruger 10/22 1022 Automatic Bolt Release and the Extended Magazine Release by Volquartsen available at TriggerShims.com at http://www.triggershims.com/
430
views
Ruger 10/22 Firing Pin - How To Install a 10/22 SureStrike Firing Pin
Hi Folks, Lance here from http://www.TriggerShims.com
In this video, we install a new Volquartsen A2 SureStrike Firing Pin in our 10/22 Rifle.
The Replacement Firing Pin in a nice upgrade, and is available at http://www.triggershims.com/
We also have a companion video that shows how to install the replacement A2 Extractor and Spring.
411
views
AR-15 Muzzle Break ~ Compensator Shims
Available at https://www.triggershims.com/
Our TriggerShims Brand AR-15 Compensator Shims can be used to Align your Muzzle Device, Muzzle Brake, Compensator or Flash Suppressor on your 1/2" Threaded Barrel.
These Tempered Stainless Steel USA Made Shims Ensure Correct Fit and Precise Alignment of your Muzzle Device.
Our AR-15 Compensator Shim Pak offers a Greater Degree of Precision than any Crush or Peel Washer while also being Faster and Less Labor Intensive to Install.
Multiple Shims may be Stacked and Used Together as Necessary in Order to Achieve the Exact Thickness Required for Proper Orientation.
These Shims will fit any 1/2" Threaded Barrel including Rifles and Hand Guns that have a 3/4" O.D. Muzzle Device.
These Shims are 3/4" OD X .510" ID and are Available at http://www.TriggerShims.com/
We also have AR-10 shims available
AR-10 Shims are 5/8" X 3/4" Nominal size
396
views
1
comment
How to Install a VQ Exact Edge Extractor in a Ruger Mark II, Mark III and 22/45
We Install a Volquartsen Exact Edge Extractor in a Ruger Mark II Target Pistol.
This kit is available at http://www.TriggerShims.com/
This Installation also applies to the Original Mark I, Mark II and 22/45 Pistol
This same Extractor can be installed in the Ruger 10/22 and it's Variations like the 22 Charger Pistol and the SR-22 Autoloading Rifle
This Extractor Fits:
Ruger Mark II
Ruger Mark II 22/45
Ruger Mark III
Ruger Mark III 22/45
Ruger Mark IV
Ruger Mark IV 22/45
Ruger 10/22
Ruger 10/22 Magnum
228
views
Ruger 1022 Trigger Tear Down Video Part I
Hi Folks, Lance here from http://www.TriggerShims.com
In Part I of this video I show you how to do a Complete Disassembly of a 10/22 Trigger.
We remove all the parts from the Trigger Housing including the Hammer and Main Spring, Magazine Release, Bolt Release, Trigger, Sear and Disconnector, and Safety.
In Part II of this Video we will Reassemble with a New OEM Metal Trigger and a Power Custom Pre-Travel Adjustable Competition Trigger Kit.
Drop-in, EDM machined parts kit includes a pre-travel adjustable sear so you can achieve a custom trigger pull that performs exactly to you liking. Matched hammer further helps reduce trigger take-up to ensure a crisp trigger pull for improved accuracy. Includes everything needed to produce a light, crisp trigger for the 10/22: overtravel adjustable titanium trigger, two hammer and two trigger shims, extra power hammer spring, extra power disconnector spring, extra power trigger return spring, sear assembly pin, and trigger pivot pin.
174
views
AR-15 Trigger Spring Kit Upgrade Wolff 34910 Kit at TriggerShims.com
How To Install a Wolff 34910 AR-15 Trigger Spring Kit.
This Kit is Available at http://www.triggershims.com/
The Wolff Reduced Power Trigger Function Pak contains 1 Reduced Power Trigger Spring and Reduced Power Disconnector Spring. Designed to lighten and improved trigger function. We remove the Hammer, Trigger and Disconnector to install this kit.
157
views
How To Install a Mini-14 Hammer Spring and Trigger Shim Kit, Includes Mini-30 and Ranch Rifle
How To Install a Wolff 30351 Extra Power Hammer Spring and a TriggerShims Brand Trigger Shim Kit in a Ruger Mini-14, Mini-30 or Ranch Rifle
Available at http://www.triggershims.com/
142
views
TriggerShims.com How to Install JP Enterprises AR-15 Reduced Power Trigger Spring Kit
In this video, we install a JP Enterprises Trigger and Hammer Spring Kit.
This Spring Kit includes the Hammer Spring, Trigger Spring and Disconnector Spring.
Easy to Install, this kit will Lower the Trigger Pull to between 4.5 and 5 pounds, can be done in less than a half hour, and no Permanent Modifications are made.
This kit is available at http://www.TriggerShims.com/
For Recreational or Competition use only.
This kit should not be used in Military or Law Enforcement Applications
154
views
Ruger 1022 Trigger Reassembly Video Part II
Hi Folks, Lance here from http://www.TriggerShims.com
In Part II of this video I show you how to do a Complete Reassembly of a 10/22 Trigger in a Ruger .22 Charger.
(Part I is at https://rumble.com/embed/vbcbkx/?pub=1iexq )
We will reinstall all the parts from the Trigger Housing including the Hammer and Main Spring, Magazine Release, Bolt Release, Trigger, Sear and Disconnector, and Safety in a New OEM Metal Trigger and also install a Power Custom Pre-Travel Adjustable Competition Trigger Kit.
This kit includes a New Hammer, Adjustable Sear, Titanium Trigger with Over-Travel Stop, 4 Shims, Springs Trigger Pin and Instructions.
This drop-in, EDM machined parts kit includes a pre-travel adjustable sear so you can achieve a custom trigger pull that performs exactly to you liking. Matched hammer further helps reduce trigger take-up to ensure a crisp trigger pull for improved accuracy. Includes everything needed to produce a light, crisp trigger for the 10/22: overtravel adjustable titanium trigger, two hammer and two trigger shims, extra power hammer spring, extra power disconnector spring, extra power trigger return spring, sear assembly pin, and trigger pivot pin.
124
views
How To Install a UTG PRO AR-15 6-Position Mil-Spec Stock Assembly
How To Install a UTG PRO 6-Position Mil-spec M4 Style Stock Assembly on an AR-15
This kit is available at http://www.TriggerShims.com/
Details Removal of the A2 Stock and Installation of a New M4 Collapsible Stock
Details How to Change a Standard AR-15/M16 Buttstock to a Collapsible One.
129
views
Volquartsen Target Sear Trigger Kit VC77TS for Ruger 77/357 77/44 77/22 77/17 Series Rifles
In this video, I disassemble a Ruger 77/357 and show how to install a VC77TS Volquartsen Target Sear Kit.
This Volquartsen Target Sear Kit is available at http://TriggerShims.com
Here is the page it is on - https://www.triggershims.com/ruger_m77.html
This video also applies to the 77/17, 77/22 and 77/44
This installation will lighten your Trigger Pull - the Easiest Trigger Job for this series rifle.
This VC77TS Kit will Reduce Your Trigger Pull to around 2 Pounds by simply changing the Sear and Sear Spring.
If this is too light for your hunting rifle, you can keep your factory spring installed to increase Trigger Pull, or install a Wolff Sear Spring. This is a No Gunsmith Required Trigger Job for these rifles, very easy to install with these simple video instructions.
Always Safety Check your Rifle after any parts are installed, and if there are any questions regarding safety - see a Qualified Gunsmith. TriggerShims Brand Gun Shims are available for this rifle for the Trigger, Sear and Bolt.
116
views
Henry Lever Rifle Shim Kit Installation
In this How-To Video we install Hammer Shims and Lever Shims in a Henry Lever Action Varmint Express .17 HMR Rifle
Trigger Shims, Hammer Shims and Lever Shims for the Henry and Other Rifles are available at http://www.TriggerShims.com/
81
views