Adjusting the "V-BRAKE" bicycle brakes. Replacing the brake cable
Hello self-taught bicycle mechanics!
In this video tutorial, you will learn how to change a bicycle brake cable guard.
You will see how the job is done by a bike mechanic in a workshop.
It will show you in detail
how to adjust the brake pads on a bicycle and how to set up V-BRAKE brakes.
Even the ugliest bicycle can be brought into a technically sound condition.
Jagwire Internal Housing Damper.
00:00 V-brake rear brakes do not work.
01:00 Dismantling the brake cable of the bike.
02:25 Replacing the tensioning screw of the bicycle monoblock.
03:17 How to replace the brake cable in a bike.
04:20 Adjusting the v-brake brake pads on your bike.
05:38 Preparing the bike's brake lining.
07:15 How to route the brake line on the bike frame.
10:41 Checking the bike brakes after repair.
#bikeworkshop #bicyclebrakes #bicyclemechanics
🎥🚲 *Write in the comments, what you would like me to do in the new video.*
❓❔ *Ask your questions in the comments*
👇👇👇
28
views
Cleaning the rear derailleur on a road bike. Replacing the derailleur jockey wheels
Greetings, fellow cyclist.
A carbon road bike with a Shimano Ultegra groupset was brought to our bicycle workshop. This bicycle has been ridden for many years, but it has never been serviced in a bicycle workshop. Even high-level components require care and repair. In this video I will show you how to replace the rollers and clean the rear derailleur of the bike so that it looks and works like new and looks very nice.
00:00 Maintenance derailleur shimano ultegra.
00:19 Removeing the rear derailleur of the bicycle.
00:54 How to remove bicycle rear derailleur jockey wheels.
01:23 Cleaning the rear switch in gasoline.
03:17 How to clean the rear derailleur of a bicycle.
04:20 Washing the rear switch of a bicycle with a high-pressure water jet.
04:56 Why replace the jockey wheels on the rear derailleur.
05:59 How to properly install bicycle rear derailleur jockey wheels.
06:58 We tighten the bolts to limit the movement of the rear derailleur of the bicycle.
08:29 How to grease a bicycle rear derailleur.
09:42 Installation of a rear derailleur on a bicycle.
If you liked this video,
share this video with your friends ❤️
It will help the development of the channel! 📈
*Ask your questions in the comments* 👇
❓ ✍ 👇
14
views
Replacing the bicycle hanger of derailleur. Green bicycle repair (part 2)
Hello fellow bike mechanics!
In this video tutorial we will continue to repair the green bike.
I will pick up a new bike derailleur holder hook.
I'll do the installation. The shifter was a little warped.
I will be aligning the bike shifter.
I will for now how to install the bike derailleur on the bike and do its adjustment.
00:00 Broken bicycle hanger of derailleur.
00:20 Selection of a new bicycle rim.
00:57 How to install a new bike derailleur cockerel.
01:17 How to disconnect the bike chain.
02:03 Installing the bicycle wheel on the bicycle.
03:14 Adjusting the rear brakes of the bicycle.
03:33 Aligning the bicycle's wheel rims.
05:19 Installing the bike's derailleur rollers.
06:42 Mounting the bike's rear derailleur.
07:14 How to install the chain on the bike.
09:05 How to insert the cable and jacket into the rear derailleur of the bike.
10:25 Checking the bike's rear derailleur.
10:50 Adjusting the bike's rear derailleur.
13:48 Test the rear derailleur of the bike.
#derailleur #bicyclerepair #bikemechanics
19
views
How to improve shifting gears on your bike. 3 good tips for cyclists
Improper gear shifting on a bicycle is quite a common issue. There are several reasons for its occurrence, and accordingly, various ways to fix it. One possible cause of poor gear shifting is an old and worn-out cable and housing. In this video, we will demonstrate how to replace the cable and housing for gear shifting on a bicycle. This video will be interesting and useful for cyclists and those who want to repair their bike independently
Plus, I'll show you a few secrets to making your bike shift better.
00:00 Journey to the workshop with the cat.
00:30 Poor gear shifting on the bicycle.
00:44 How to remove the gear shifting cable on a bicycle.
01:06 The cable rubs inside the housing, causing poor movement.
01:30 How to extract the cable from the revoshifter.
02:44 Installing a new gear shifting cable.
03:46 Drilling frame mounts on the bicycle for installing a continuous shifting line.
04:47 Cutting and installing a new housing for the bicycle cable.
06:05 Checking how the rear derailleur of the bicycle works.
06:32 How to check if the derailleur hanger on the bicycle is straight.
07:16 Adjusting the bicycle gear shifting.
08:17 Adjusting the set screw of the rear derailleur on the bicycle.
09:30 Final touch.
10:10 Job done, and the cat approved.
#derailleur #bikeshifting #bicyclemaintenance
✍ *Ask your questions in the comments*
✍ *Write in the comments, what you would like me to do in the new video.*
👇👇👇
27
views
It will make your bicycle faster. Maintenance of the bike hub
Hello cyclists. In this video lesson, I will show you a useful secret to make your bike faster.
Do everything as I have shown in the video and your bike will ride much better.
Bicycle wheel hub maintenance is important!
If you liked this video,
share this video with your friends ❤️
It will help the development of the channel! 📈
*Ask your questions in the comments* 👇
❓ ✍ 👇
A kids bicycle has broken down. Replacing the bicycle headset
Today, a children's bicycle was brought to our bike workshop. This bicycle had an issue with the headset. As you can see, riding this bike was impossible. I will show you how to repair a child's bicycle.
I hope that my video tutorial will be helpful for you. You will learn how to replace a bicycle's headset on your own.
00:00 The fork and handlebar of the kid's bike are loose and not holding well.
00:44 How to remove the handlebar on a children's bike.
01:47 How to remove the fork on a child's bike.
02:35 Removing the rings and cups of the children's bike's headset.
03:08 Dismounting the kid's bike's wheel.
04:00 Close-up of old damaged parts of a children's bicycle headset.
04:57 How to install a headset on a child's bike.
06:00 Installing the fork on the child's bike.
07:00 How to put on the front wheel of a kid's bike.
07:31 Installing a handlebar stem riser adapter on the children's bike.
08:20 How to align the handlebar on a child's bike.
09:10 Testing the kid's bike after the repair.
#kidsbike #bicycleheadset #bicyclekids
13
views
Replacing the bicycle shift cable. Green bicycle repair (part 1)
Many bicycles are brought to our workshop. Almost every bike has the same fault.
This fault consists of a worn bicycle shift cable. The cable cover is also clogged with dirt.
To fix this problem, we need to replace it all. After replacing the cable, we will adjust the bike.
00:00 The rear derailleur on the bicycle is broken.
01:00 How to remove the rear bicycle wheel with nuts.
01:31 Disassembling the broken derailleur hanger on the bicycle.
01:55 Remove the old bicycle cable.
03:32 How to remove the cable from the bicycle's shift/brake lever.
04:03 The speed shifting cable of the bicycle is damaged.
05:47 Replacing the cable housing of the bicycle.
06:32 Select end caps for the bicycle's cable housing.
08:15 Subscribe to not miss the continuation of the video.
#bicycleworkshop #bikerepair #bicycle
2
views
Ball bearing bicycle wheel hub service. Rebuilding and cleaning of bicycle hubs.
Hello to those who ride a bike!
In this video tutorial, I will show you "How to service ball bearing bike wheels hubs".
We will change the oil in a conventional rear hub MTB bike, or mountain bike.
Watch this video lesson to the end you can service yourself your rear hub on your bike.
You will see how the bushing is serviced in the workshop. Bicycle hubs: Rebuilding and cleaning.
Make your bike fast and ride fast by doing wheel hub maintenance at home. In this video I will show you how to easily service Shimano ball bearing hubs at home.
IF you do this service on your bike, it will go fast and your ride will be FAST.
If you're passionate about cycling, this video is for you.
Speech-free video with technical audio, transcending language barriers. An international, do-it-yourself (DIY) video format.
00:00 Rebuilding and cleaning the hubs
00:10 Cassette removal
01:12 Disassembling the hub
04:27 Maintaining ball bearing hubs
06:54 Adjusting the cup and cone bearings on your bike
08:05 Fitting the rotor to the wheel
08:25 Cassette installation
8
views
Why is it difficult to ride a bicycle? Hollowtech bottom bracket maintenance
Hi friends!
Every self-respecting cyclist, from time to time, asks the same question, "Why is my bike so hard to ride?"
I pedal as hard as I can, but my bike is so hard to get up to speed.
Even if I'm riding on a flat road and there is no headwind, my bike rides very hard. Today I will show you one secret that makes your bike slow.
If your bicycle bottom bracket is serviced in time, your bicycle will become faster.
This video communicates through mechanics, not words. Language barriers are irrelevant; presented as a DIY tutorial.
This video is designed to cater to the interests of cycling enthusiasts.
00:00 Servicing the bottom bracket hollowtech on a bicycle.
00:35 The shimano hollowtech bottom bracket doesn't rotate well.
00:57 How to clean a shimano bottom bracket.
02:52 The bearing in the bottom bracket doesn't rotate well.
03:33 Disassembly of the protective ring of the bicycle's bottom bracket.
04:57 How to remove the bearing retainer of the bicycle's bottom bracket.
05:54 How to wash the bearing of the bicycle's bottom bracket.
07:31 Flushing the bearing to an ideal state.
08:20 Drying the bearing of the bicycle's bottom bracket with a compressor.
08:29 How to lubricate the bearing of the bicycle's bottom bracket.
10:25 The work is done.
#bicycle #bottombracket #bikemaintenance
31
views
Bicycle loses brake. Bleeding hydraulic brake Shimano Deore
Shimano hydraulic brake. Deore falls through the handle.
if you press it several times, the handle is restored. but the first press, the brake lever fails.
or if you flip the bike, then after that, the handle also fails.
In this comprehensive and practical tutorial, we will guide you through the step-by-step process of troubleshooting and resolving common brake problems on your bicycle equipped with Shimano Deore Hydraulic Brakes. If you've noticed your bike losing brake power or experiencing uneven brake lever positioning, this tutorial is perfect for you!
First, we'll delve into the issue of a bicycle losing its brake power, explaining possible causes and how to diagnose the problem accurately. Then, we'll demonstrate a simple yet effective technique for unscrewing the brake lever to ensure it is perfectly parallel to the ground, optimizing your braking performance.
Next up, we'll dive into the crucial process of pumping Shimano Deore brakes and teach you how to use the appropriate hydraulic brake oil. We'll walk you through the steps of removing pesky air bubbles from the hydraulic brake system, ensuring a smooth and responsive braking experience.
For the hands-on part, we'll show you how to push the brake lever of your bike several times while simultaneously changing its angle, effectively eliminating all air bubbles from the brake system. You'll witness the difference in brake performance as you do this process correctly.
Throughout the tutorial, we'll stress the importance of safety and precision when working with hydraulic brakes. As we proceed, we'll also demonstrate the correct method to clean the brake lever from any excess oil, ensuring its longevity and consistent operation.
By the end of this tutorial, you'll have gained a comprehensive understanding of how to inspect, maintain, and optimize your Shimano Deore Hydraulic Brake system. Feel confident in tackling future brake-related issues and enjoy a safe and smooth cycling experience.
#bike #bikeworkshop #mtb
00:00 Bicycle loses brake
00:15 Unscrewing the brake lever to make it parallel to the ground
00:31 How to pump shimano deore brakes
03:43 Cleaning the brake lever from oil
04:10 Check the shimano deore hydraulic brake
11
views
The Bicycle brakes squeak. Bicycle brakes squeak.
The bicycle slows down badly. Additional brake sound. Screeching, creaking pads do not grab.
The bike doesn't want to slow down! These are all signs of a dirty brake system.
When oil gets on the bicycle brake, everything starts to creak and slow down badly.
In order to fix this problem, we need remove the brake disc and remove the pads.
We will degrease the pads and brake disc. Everybody must be perfectly free of residues of grease and debris.
Cyclists will definitely enjoy watching this video.
00:00 Bicycle brakes squeak.
00:10 If you squeeze the brake pads, you can hear the pads squeak.
00:25 Removing a wheel from a bicycle.
00:41 How to remove the brake pads from the brake caliper of a bicycle.
01:27 You can see a ball of cobwebs on the pads.
01:32 Degreasing the caliper on a bicycle.
02:13 Shorten the brake cable as it is loose.
02:41 Remove the brake disk from the bicycle wheel.
03:29 Degrease the brake disk of a bicycle.
04:12 How to clean a bicycle brake disk properly.
04:26 It is very important to remove all dirt inside the perforations of the brake disk.
06:12 What you need to do to keep your bicycle brake disk from squeaking.
06:20 It is important not to overheat the brake disk, so that it does not spoil.
06:39 Degrease the brake pads on your bicycle.
07:25 The brake pad spring must be cleaned.
07:55 How to remove oil residue on bike brake pads.
08:08 The main thing is not to overheat the brake pads so that they do not fall apart.
09:05 Installing brake pads in a bicycle caliper.
09:45 Installing the wheel in the bicycle frame.
10:22 It is very important to clamp the wheel when the bike is perpendicular to the floor.
10:36 Adjusting the bicycle brake, after cleaning.
#bicycle #brake #squeaks
31
views
Bicycle shifter maintenance. How to open and cleaning bike shifter
Hello cyclist friends. This video tutorial is about the shifter on a bicycle.
It often happens that the speeds on the bike do not want to switch and in this video, we will look at the reasons why this happens.
I will show you all the steps, how to disassemble the shifter, how to clean and lubricate it.
I will also use a shimano sl-m310 derailleur.
Be sure to turn on subtitles for more information.
Video "DIY" and "ASMR" how to service shimano shifter mountainbike.
#mountainbike #shimano #shifter
00:00 Bicycle shifter wont shift
00:33 Shifter shimano sl-m310
00:41 How to open bike shifter
02:07 What does a bicycle shift look like from the inside
02:39 Why the bike slate doesn't want to work
03:10 How to cleaning bike shifter
03:45 Lubricate bicycle shifter
04:55 How to assemble bicycle gears
06:50 Fix the lower gearshift cover of the bike
07:06 Install the cable in the bike shifter
07:41 Testing bicycle shifter
07:52 Nice work
20
views
Bicycle repair. How to change mtb bike headset
This video is about repair bicycles. It will demonstrate how to replace a bicycle headset in a bike workshop.
00:00 Bicycle repair and mtb bike headset.
00:24 Old bicycle headset.
00:44 Unboxing new bike headset.
01:00 How to replace a bicycle headset.
01:20 How to remove bike headset.
04:28 How to install a bike headset.
06:58 Bicycle headset lubrication
07:42 Install a bicycle stem threadless.
08:29 Install a bicycle front wheel.
09:03 Install a bicycle front brake.
09:15 Adjusting the bicycle disc brake.
10:03 How to adjust bike headset.
24
views
Bike Upgrades. Shimano Hollowtech II Bottom Bracket and cranks Replacement
Hello cyclists!
Bike upgrades. DIY with ASRM
Turn on the subtitles, sit back and let us begin.
In this video tutorial I will show you how to replace a Shimano Hollowtech II bottom bracket and cranks. How to remove bicycle cranks.
Be sure to lubricate the removal tool, all threaded connections must be lubricated. Your equipment will last longer and the disassembly of the assembly will be easier and faster.
Repeat after us and you will be able to replace cranks on a bike without difficulty. Now let's compare the difference in weight between old and new bike cranks. The difference is insignificant, but it lies in the weight.
How to remove a bicycle bottom bracket. The old bottom bracket under the square is heavier. Therefore, the whole rod system is lighter when using Hollowtech II. In the workshop I use long levers, large tubes so you can unwind each part. Come to our playlist, you will find many videos on the operation of the transmission. The old bottom bracket was dirty. All the dirt that flies into the frame falls on the bottom bracket. Then everything creaks and squeaks. New bottom bracket. Shimano Hollowtech II bottom bracket sm-bb52 out of the box. The manufacturer puts a lot of grease in the bottom bracket. This grease can be used to lubricate threaded connections.
Spacers, a very important detail. I'll show you clearly how, without instructions, individually for your carriage knot, you can pick up RINGS. First, we will weigh our new Hollowtech II bottom bracket. The old bottom bracket for the square and the new bottom bracket, as you can see, the difference is significant. Our bottom bracket is 68 - 73 mm. The frame is 73 mm wide at the bottom bracket shell. Spacers allow you to adjust the width of the bottom bracket. Pay attention to the spacer selection. Depending on the trimming, dobby glasses can be completely different.
This is the universal way to choose the right spacers. Replace the bottom bracket. Lubricate threaded connections well. The lubricant will repel water and your sled will live much longer. Subscribe to the channel and like) Bicycle cranks replacement. If you do not lubricate the splines, and they need to be lubricated, your cranks will creak and make an unpleasant creaking noise.
The left crank has a special pin. It must be lifted. It is necessary to tighten it so that the rod does not dangle and does not have to be pulled. The force should be moderate. Left connecting rod, it is important to tighten correctly with a force of 12 or 14 Newton per meter.
The rest of the knots in this video we tighten by hand, according to my experience, sensations. But this knot must be tightened according to the rules cross over the cross tighten the bolts in turn. All! Our bikes are ready.
00:00 Bike upgrades DIY
00:23 How to replace a Shimano Hollowtech II bottom bracket and crankset
00:35 How to remove bike cranks
02:30 How to remove a bicycle bottom bracket
04:34 Shimano hollowtech II bottom bracket sm-bb52 unboxing
06:53 Bottom bracket replacement
09:04 Replacing bicycle cranks
#cranks #bicycle #bikeoverhaul
29
views
It needs to be fixed in your bicycle ! Creaking bicycle bottom bracket.
Hello everyone who loves biking!
What is important to fix on your bike?
Bottom bracket tapping & facing tool kit. When using this tool, it is very important to lubricate everything thoroughly. If you do not lubricate the tool, results may not be achieved. Install the tool in the bottom bracket of your bike. Mount the Facing Bottom Bracket. Most bicycle frames have a square carriage or a carriage with external bearings overlapping the sides on the right. Why do you need to do all this, you ask? If the bicycle bottom bracket is crooked, the butt will have its own paint, and uneven surface, then for this reason, your bicycle's carriage will be damaged much faster. Your bike will squeak. You will have to change the bottom bracket very often and spend extra money for it. Look how much paint we filmed! Lots of paint! After processing, the surface is even and smooth. But the paint can remain somewhere else. It is necessary to clean the cutter after processing and repeat until we get the result. There is more to do. Refill the tool in the bottom bracket shell and clean everything perfectly. From our practice we observe that on new bicycles there is usually no such processing of the frame. Perfect! Perfectly aligned bottom bracket after machining. We have to repair both sides. Lots of factory paint left where it shouldn't be! Buying this bike is of course not profitable. Therefore, it makes sense to contact the workshop to do it for you for a fee. It must be repaired in your bike. After the first cleaning, burrs remain. They must be removed! We clean our cutter again and run the tool again. As you can see, it takes a lot of time and effort to prepare a bike frame for use. This is not done in the factory, otherwise production can be very expensive. The price of the bike in the store will be very high if all these little things are eliminated first. Thanks for watching! Rate Our Like Video! Write Comments!
DIY with ASMR
00:00 Important things to fix on your bike
00:10 Tools for bottom bracket tapping & facing set
01:19 Installing tools in your bottom bracket
01:45 Fix facing bottom bracket
04:35 Perfect facing bottom bracket after processing
06:30 What needs to be fixed on your bike
#bikeservice #tutorial #bottombracket
18
views
How to straighten bike wheel. Fix Rear bicycle Wheel
This new video falls under the category of bicycle wheel repair.
Today will be a video lesson on how to do a bike rear wheel alignment.
To be honest, the wheel is almost flat. There is a small frontal runout of the bicycle wheel rim.
The customer has very much requested that this small bump on his wheel be corrected by me.
The customer's wish is the law.
I will align the bicycle wheel so that the brake pads do not rub the rim of the bicycle wheel.
How to center a bicycle wheel rim.
#bikewheel #fixbicycle #bikeservice
00:00 Bicycle wheel is not straight and wobbles.
00:20 Removing the rear wheel of the bicycle.
00:37 How to quickly remove the tire from the bicycle wheel.
01:42 Truing stand for wheels.
04:01 Checking the tension of the bicycle wheel spokes.
04:25 How to true a bicycle wheel.
06:52 Checking the centering of the rim between the lock nuts of the hub, or "dish.".
08:24 Checking the performance of the wheel alignment.
32
views
Adjusting v-brake bike brakes. Brake pad burrs.
How to adjust V-brakes on a bike when the brake lever falls off but the brake does not apply.
Let's try to adjust the cable to the desired position.
The movement of the lever is correct, now look at the position of the blocks.
One of the disadvantages of brakes on a bicycle, V-brake type, these are pads that are manufactured.
They gradually go down and a step appears on the brake shoe.
This step prevents the brake from working properly!
To properly adjust your bike brake, you need to pull out the block and cut off this step.
If cycling is your thing, you won't want to miss this video.
Non-verbal video featuring mechanical sounds. Language barriers don't apply; internationally accessible. Presented as a DIY tutorial.
00:00 V-brake adjustment.
00:15 Tighten cable tension adjustment screw.
00:32 Tighten brake cable.
01:09 Brake pad is unevenly positioned.
01:19 Remove brake pads.
01:40 Brake pad has uneven wear.
01:50 Trim overhang on brake pad.
02:40 Remove and trim second pad.
03:37 Before installing the pads, it's important to get the shims in the correct order.
03:54 Install the pads.
04:38 Place the pad so that it makes full and even contact with the rim when the brakes are applied.
05:28 Repeat the same procedure for the second pad.
06:55 Hold the pad as it is pressed in to prevent it from rotating.
08:23 Attach the brake cable.
09:24 Observe the movement of the right and left brake arms while pressing the brake lever.
09:48 Adjusting the distance between the pad and the rim of the left and right v-shaped brake shoes.
10:53 Tighten all v-brake screws with a hex wrench.
11:16 Great job.
#vbrake #bicycle #tutorial
10
views
How to quickly change a wheel tube on a road bike
Hello, friends, cyclists. Today's video tutorial will be about how to quickly change the cranksets on a road bike. These cranksets are for a square-type bottom bracket. You will see how to do a crankset replacement on a bicycle with a bicycle mechanic in the workshop. All the nuances and the sequence of actions for the correct replacement of the cranksets will be covered.
00:00 Bicycle cranks need to be replaced.
00:53 How to remove the pedals from the bike.
01:39 How to remove the connecting rods of a bicycle with a square carriage.
03:49 What to do if the bicycle cranks do not come off.
05:30 Dismantling the left connecting rod.
07:13 Cleaning and tightening the bottom bracket before mounting the cranks.
09:07 Mounting the new cranksets on the bike.
11:50 How to put the pedals on the cranks of a bicycle.
#crankset #roadbike #bicyclemechanic
🔴🎥🚲 *Write in the comments, what you would like me to do in the new video.*
❓❔❓ *Ask your questions in the comments*
👇👇👇
7
views
Bicycle disc brake pads replacement. Hydraulics Shimano BR MT200.
In this video tutorial, I will show you how to replace bicycle disc brake pads when the pads are worn out and the brakes stop working.
The brakes are constantly squeaking and making unpleasant noises.
Subscribe to the channel and watch this video lesson to the end.
You will learn all the tricks and useful tips on how to replace bicycle disc brake pads.
As you can see, our Shimano MT-201 BR MT200 brake pads are already worn out.
It brakes metal on metal and damages the brake disk.
First we need to remove the old Shimano MT201 caliper pads.
The pistons came out, the spring was destroyed, the pads just aren't there anymore.
Cleanliness is the key! Wipe down the fork and caliper thoroughly.
Degrease with isopropyl alcohol and wet wipes. When replacing pads on hydraulic brakes, be sure to bleed the hydraulics.
This video is tailor-made for those who love biking.
Language-independent video, utilizing only technical auditory elements. A universal experience in a DIY video style.
00:00 How to replace bicycle disc brake pads.
01:27 How to remove the pads from a Shimano caliper.
01:39 How to check brake pad wear on a bicycle.
03:13 Turning the funnel to bleed the Shimano hydraulic brake.
04:13 Squeezing the piston of the caliper.
07:08 Cleaning the brake disk.
07:59 How to bleed Shimano hydraulic disc brakes.
#bike #pads #shimano
6
views
How to quickly pump the hydraulic brake on a bicycle
In this video tutorial, I will show you how you can quickly pump the hydraulic brake on your mountain bike.
This procedure should be done regularly. The hydraulic fluid will gradually drain out of the brake. The brake on your bike starts to fail. The brake lever reservoir is leaking and needs to be filled with mineral oil.
In this video, we use a Shimano brand brake with mineral oil.
2
views
How to install a tubeless tire on a bike. Bicycle tubeless ready
In this video I will show you how to properly install a tubeless tire on a bicycle.
I will also put tubeless tape on the rim and install the valve.
For example, I will use a "Zefal" sealant and "Stans" tubeless tape.
This video tutorial"diy" in style "asmr" for people who love cycling.
Video episodes:
00:00 How to install a tubeless tire on a bike
00:12 Bike tubeless wheel kit
00:32 What is the difference between a tubeless bike rim and a tube rim
00:43 Cleanig bike rim
01:24 Bicycle tubeless slick tire
02:10 How to pick tubeless rim tape
04:51 Installation a tubeless rim tape
09:19 Trimming the edge of the tubeless tape of a bicycle wheel
09:51 Finding and marking the hole for the tubeless valve
10:40 Heating the awl to pierce the hole for the tubeless valve
11:08 Burning a hole in the tubeless tape
11:45 Installation a tubeless tape
13:11 Removing presta valve core
14:20 bicycle tubeless tire installation
18:36 Pouring sealant into the wheel
21:54 Final pumping of a wheel
23:11 It`s done)))
14
views
Why bicycle is hard to control. Bike headset maintenance | DIY
This video tutorial about bicycle. I show you why bicycle is hard to control. We will look at why the handlebars of a bicycle can jam. I will do a full maintenance bike headset.
Video be interesting for cyclists!
00:00 How to overhaul bike headset
00:29 Why bicycle is hard to control
01:29 Removing rear wheel
01:48 Removing rear disc brake
02:32 How to remove bike headset
04:47 How to remove bike fork
05:08 Dirty bike steering bearings
06:16 Bycycle headset service
06:39 Bike headset maintenance, cleaning all the details
08:28 Cleaning a bicycle fork
09:18 Start to assemble the bike headset
09:53 How to grease a mtb headset
14:18 Bike headset adjustment
#bike #maintenance #bikeworkshop
13
views
Bicycle front crank replacement. Pressing a new crank on a bike | DIY
Hello bikers!
In this video tutorial we will show you: How to replace a bicycle front chainring and press a new crank onto a bicycle. I will teach you how to use a bicycle crank puller. It's very easy!
It will be interesting for bikers!
Bike video format "DIY" with "ASMR".
*Main episodes of the video tutorial:*.
00:00 Bike front chainring replacement
00:28 New crank Shimano fc-2350
01:04 Removing the crank cap bike
01:15 Unscrewing the clamping bolt
01:44 Cleaning the crank thread
02:00 Lubricating the crank thread
02:18 Bicycle crank puller
02:36 Lubricating the crank puller
02:54 How to remove a crankset with a crank puller
03:52 Removing a crank on the right side of a bike
04:41 Bicycle crank square taper
05:01 Removing a pedal from a bicycle crank
06:48 Press right crank on a bicycle
07:47 Mounting the right pedal to the crank
08:24 Pressing left bicycle crank
09:21 Installing the left pedal onto the crank
10:00 Good job!
4
views
What can damage a bike? Bicycle rear derailleur repair
Hello my cyclist subscribers. This video is going to be unusual. Once again, a bike was brought to our bike shop that broke down for an unusual reason. As they say, there's always a first time for everything. I've never seen ordinary grass break a bike's shifter before. Because of the grass that was on the bike's shifter sprocket, the rear derailleur holder attachment was broken. I think it would be very useful for you to know which part will prevent a similar breakdown in the future. I'm going to show you how to fix the bike. This will be a short lesson on how to replace the bracket that secures the rear derailleur to the bike frame. Also, I will show you how to adjust the rear derailleur. I will perform the removal and installation of a bicycle's rear derailleur and fix a deformed derailleur frame.
#derailleur #bikedamage #bikeshop
6
views
What's inside a new Rockshox Judy bike fork. Bicycle fork review and lubrication.
In this video I show you what's inside a new Rock Shox Judy fork.
When you buy a new bike fork, you should always do a first service to make sure everything is okay with the bike fork.
It happens that there are a lot of metal shavings inside the bicycle fork.
Many bike forks have a lack of oil inside.
In this video I'll show you how to take the Rock Shox Judy fork out of the box, do a superficial inspection of the bike fork, and perform the first maintenance.
This video instructions "DIY" for cyclists. Video tutorial in "ASMR" style.
It will be interesting and useful for cyclists!
00:00 Rock Shox Judy
00:19 Unpacking the rock shox judy fork
00:55 Rock Shox Judy bike fork review
02:37 How to disassemble a bike fork
05:03 What to look for in a new rock shox judy fork
06:19 Cleaning the inside of your fork
06:55 Lubricating the fork with grease
08:59 Lubricating the fork boots
10:42 Bike fork Rock Shox assembly
11:36 Filling liquid oil in a bicycle fork
13:11 Cleaning the outside of a bicycle fork
16:16 Testing a new Rock Shox Judy bicycle fork
#rockshox #bicyclefork #mountainbikes
8
views