How to Measure for Mobile Home Crossover Duct

Phil shows you exactly how to measure the cross over ductwork for your double-wide mobile home.

⏱️⏱️Chapters⏱️⏱️
00:00 Intro
00:12 Showing Crossover duct work, want to use wrapped metal to prevent rusting out
01:13 Has 2 crossover
01:53 How to measure for duct you need

🙏 Subscribe, 👍, it helps a lot!!
➤❓/ 💬: ask@straightarrowrepair.com
➤ Follow https://straightarrowrepair.com/pipf

➤➤I get a little for the channel-no charge for you if you use the links:
➤➤Shop Amazon https://amzn.to/3CxD1T4
➤➤Tool lists & recommended products🧰 https://straightarrowrepair.com/0lvf

➤➤Services We use
➤➤MORNINGFA·ME https://morningfa.me/invite/StraightArrowRepair
➤➤A2 Hosting http://www.a2hosting.com/refer/140244
➤➤Tubebuddy https://www.tubebuddy.com/StraightArrowRepair
➤➤Apsumo http://fbuy.me/v/philbridges
➤➤VidIQ: https://vidiq.com/straightarrowrepair

#CrossoverDucts, #MeasureCrossoverDuctwork, #Double-WideCrossoverDuct

Transcript:
Okay. Just for your reference, if ever you're getting ready to work on your own double wide's crossover duck. And I'll show you what that is. That's when it pushes the air from either heat or cold from one side to the other. Is that some ductwork that goes from one side to the other. I recommend you do it with the metal that's wrapped and you can pull the insulation over and insulation so, if you just do the metal.

It will rust out from the condensation, from the difference in temperature between the inside and the outside. So what I'm fixing to do is show you how to tell how much you need and what size you need. So we're going to crawl underneath here and take a look at it. Right.

Here's the evidence that the. This is where the conditioning unit was wiring to it and right here is where it crosses over to. Evidently this one, although usual it has two crossovers, one over there, they might have had an additional, I don't see the other.

The ductwork there, you want to measure across. In this case I don't see where they went across I don't know why they have a double like that. I mean if this happen to go off I can't find a reason why.

So, we'll end up needing a 90 turning down here. Then a 90 turning that way and then a 90 going up. So you don't ever want to be short. You want to have a little more than what you need. So 8' plus whatever it takes to go up. They come in 5' sections There's the freon line. There's the gas line. You got quick connect, which is kind of odd. Somebody really charged them for that.