Upgrading the 2GIG GC3 to an LTE Communicator
In this video, Jorge upgrades the cellular communicator inside the 2GIG GC3 Security System. This is done by powering the panel down, opening up the panel, taking out the old communicator, inserting the new one. Adding a new communicator will improve communication speeds and extend the panel's life.
As cellular technology continues to grow and evolve, older cellular networks get shutdown. When this happens, a user may need to replace the communicator on their security system. Each communicator is specifically designed to work with a certain cellular network. If the cellular network is shutdown, then the communicator will no longer function.
That is why it is very important to always get a communicator that connects with the most advanced cellular network available. A newer and more advanced cellular network will have a longer remaining support life than an older and less advanced network. But if you do have a communicator that connects with an older network, you can usually replace it.
In addition to extending the life of your security system, a new communicator will also increase its communication speeds. This can come in handy whenever you send commands through Alarm.com. This includes and system commands like arming and disarming, as well as automation commands like turning off the lights or adjusting the thermostat. Users may notice that commands go through faster and that overall performance is improved.
If you plan on upgrading your system's communicator, make sure you arrange the swap with your alarm monitoring provider before you do so. They will need to update the information with Alarm.com so that your communicator works properly. Only complete the swap once you have received permission from your monitoring company. Remember, you should power down your system before completing the swap. Failing to power down the system could result in damage.
Please Note: When swapping the cell module in the 2GIG GC3, you must coordinate the physical swap of the module with the programming swap, which occurs on the Alarm.com server. Be sure to coordinate with your alarm dealer, and only physically swap the module once they have told you to do so.
http://alrm.gd/get-monitored
https://www.alarmgrid.com/faq/how-do-i-upgrade-my-2gig-gc3-to-an-lte-communicator
-
9:45
Alarm Grid Home Security DIY Videos
3 years agoSetting Up a Cellular Communicator for a 2GIG GC3e
9 -
4:52
Alarm Grid Home Security DIY Videos
5 years agoFeatures Added in the 2GIG GC2 1.19 Firmware Upgrade
16 -
5:32
Peter von Panda
5 years agoUpgrading My HP Shuttle Desktop Computer From 8GB to 16GB RAM
12 -
8:28
AccAutomation
2 years agoC-More EA9 HMI Series Panel Communication and Updating Firmware
4 -
7:07
Teklectic
4 years agoGeeetech GT2560 MOSFET Upgrade
5 -
18:12
Ham Radio CQ
3 years ago $0.07 earnedCar Ham Radio Install BTECH GMRS TX 50 Watt (2M 70CM RX Only) Radio
9444 -
2:18
KERO
2 years agoTime may be now to upgrade phones with 5G rollout
171 -
23:52
Basic Bites
2 years agoUPGRADING Pi1541 Zero to 3A+ | Commodore 64
18 -
5:20
MakaJerycho
1 year agoLEXIN G16 Rider Intercom - Unboxing and Install
1 -
16:52
Ham Radio CQ
3 years ago $0.06 earnedCar Ham Radio Install QYT 25 Watt 2M 70CM Radio (UPDATE)
1.06K7