Connecting My Qolsys IQ Panel 2 to WIFI
In this video, Jorge from Alarm Grid teaches users how to connect a Qolsys IQ Panel 2 to a local WIFI network. This IQ Panel 2 can use IP communication to connect with the Alarm.com Servers. Keep in mind that the system's cellular communicator will also need to be active, per Alarm.com requirements.
If you want to use a Qolsys IQ Panel 2 for monitoring service, then you will need to have it connected with a network. You will need to activate the cellular communicator and get the system connected with a cellular network in order to use the system with Alarm.com. But many users also prefer to connect the system with a local IP network, as most users will have WIFI in their homes anyway. WIFI connectivity is generally a little bit faster than LTE cellular service, although cellular is more reliable. Once you get the Qolsys IQ Panel 2 System onto both a WIFI network and a cellular network, its communication path will then be considered "dual-path".
When an IQ Panel 2 is connected to both WIFI and cellular, it sends out signals across both paths whenever it needs to communicate out. Whichever signal reaches the intended destination first goes through, while the other signal is automatically discarded. This prevents Alarm.com from receiving two of the exact same commands when the system only intended to send out one single command. Since WIFI is generally faster, it is usually seen as the primary communication path. But cellular communication provides a very strong backup option. This is important, as an internet or power outage would otherwise prevent the system from communicating out.
Remember that when connecting the Qolsys IQ Panel 2 to a WIFI network, you will need to provide the password for the network you intend to use. The Qolsys IQ Panel 2 System can connect to both 2.4 GHz and 5 GHz WIFI networks.https://www.alarmgrid.com/faq/how-do-i-connect-my-qolsys-iq-panel-2-to-wifi
-
7:52
Alarm Grid Home Security DIY Videos
4 years agoAdding a Qolsys IQ Panel 2 to My Local WIFI
12 -
4:27
Alarm Grid Home Security DIY Videos
8 months agoQolsys IQ Panel 4: Connect to WIFI
36 -
6:40
Fusion Automate
7 months agoHow to Connect BLIIoT Cellular Edge IoT Router R40A Gateway to WiFI Network | IoT | IIoT |
24 -
4:47
A Real Security Company
2 years agoQolsys Wifi Fix and Setup with SecurityAllStar
64 -
4:46
churchill
1 year agoWifi Troubleshooting with Nirsoft’s Wifiinfoview
1 -
22:01
Code V
7 months agoConnecting CyberPower UPS Device to Openwrt router for Windows and QNAP
10 -
3:14
gasuportetech
6 months agoComo COMPARTILHAR WIFI via QR CODE
-
1:51
Computer Programming, Web Development, Tech Support, WordPress
2 years agoHOW TO CONNECT YOUR SMART PHONE TO YOUR WIFI
59 -
0:18
Back From Mars
3 months agoTesla Model Y: How to CONNECT to Wi-Fi YOURSELF (Step-by-Step Guide)
36 -
1:27
Serialio - RFID, Barcode, and Wireless Solutions
2 years agoManual Connect Gallagher HR5 Livestock RFID Reader to iPad with SPP-BLE Bridge
252