2GIG Edge: Removing a Z Wave Device
In this video, Michael from Alarm Grid shows you how to remove a Z-Wave device from a 2GIG Edge Security System. This may also be referred to as clearing a Z-Wave device from the network. When you do this, all Z-Wave network data will be cleared from the Z-Wave device, and you will need to enroll it with a new Z-Wave network in order to continue using it. You can clear a Z-Wave device whether it is paired with the 2GIG Edge, paired with a different Z-Wave controller, or not paired with any Z-Wave network at all. You will still get a notification stating that a Z-Wave device has been cleared. A good practice when adding a new Z-Wave device is to clear it from the network first, in order to ensure that all Z-Wave network data is properly wiped out.
The 2GIG Edge has a Z-Wave Plus V2 controller inside. This is also known as a Z-Wave 700-Series controller. It's because of this module that you are able to pair Z-Wave devices with the system. Paired Z-Wave devices can be controlled locally at the panel, as well as remotely through Alarm.com. You can also include the paired Z-Wave devices with smart scenes so that they activate automatically based on a set schedule or with predetermined system events. All sorts of Z-Wave home automation devices can be paired with the system, including lighting modules, door locks, smart thermostats, and more.
Like most Z-Wave hubs, the 2GIG Edge is capable of supporting up to 232 unique Z-Wave devices. Each paired Z-Wave device is assigned its own node on the system. When you clear a Z-Wave device, that node becomes free, allowing you to pair a new Z-Wave device in its place. This may be necessary if you have a very large number of Z-Wave devices set up with the system. In addition to the 2GIG Edge Z-Wave device limit, the system's automation platform of Alarm.com also has its own smaller Z-Wave device limit of 122 Z-Wave devices.
https://www.alarmgrid.com/faq/how-do-i-remove-a-z-wave-device-from-a-2gig-edge
-
5:00
Alarm Grid Home Security DIY Videos
3 years ago2GIG Edge: Adding a Z Wave Device
47 -
4:56
Alarm Grid Home Security DIY Videos
6 years ago2GIG GC3: Z Wave Compatibility
18 -
19:04
Apache Ranch
3 years agoZ-Wave ● Pair, Reset, Exclude and Configure Dimmer and Relay Switches with SmartThings ✅ Zwave
39 -
1:16
Apache Ranch
3 years agoZ-Wave ● What is the Air Gap Switch on Paddle Switches for? ✅ Jasco GE Honeywell ZWave Zigbee
21 -
2:02
Apache Ranch
3 years agoZ-Wave ● Change LED Behavior Using Only the Paddle Switch ✅ Jasco GE Honeywell ZWave Zigbee
18 -
4:11
Apache Ranch
3 years agoZ-Wave ● Enbrighten Outdoor Smart Plug Overview ✅ ● Jasco GE Honeywell ZWave Zigbee
63 -
9:34
Apache Ranch
2 years agoZ-Wave ● Enbrighten Switch ● How to Install a Smart Switch by Yourself ✅ DIY
26 -
8:03
4Crawler
2 years agoAutomating 12V LED Patio Lights with a Z-Wave Switch
6 -
11:06
Bud's Smart Home
2 years agoDome Siren - New SmartThings Device Handler (Edge Driver Instructions in Description)
19 -
16:15
Shane Whatley
1 year agoHubitat brings NEW Products to HomeKit! (Z-Wave & More!!)
20