Spot Micro Part 6

2 years ago
58

Robot Dog, Part 6.
In the first five videos we started to build a robot dog based on the Boston Dynamics Spot, only smaller.
Now that we have all four legs done, as well as the bulk of the body, electronics mounted and power systems mostly wired,
In this part we attach the legs to the body.

Parts used.
http://www.thingiverse.com/thing:3445283
Spotmicro - robot dog by KDY0523
F_cover.stl
L_ultra_sonic.stl
R_ultra_sonic.stl

https://www.thingiverse.com/thing:3638679
SpotPupPi (Spotmini) by TezBot
Pi_Camera_LEDs.stl

2 x ultrasonic sensors, HC04
1 x Raspberry Pi Camera 8MP
4 x M1.7 5mm long self tapping screw (To hold in the Raspi Camera)
1 x 6mm diameter 1 meter long Spiral Wrap (This gets cut into 5 length, 1 x 100mm the rest evenly divied into 4)

8 x M3 10mm long ( This was listed in a previous video on the body with the associated nut thats been welded in.)

Loading comments...