Ducting Work - Assembling Metal Ductwork

Connecting Metal Ductwork

Okay, guys. Now, whenever the air conditioner does work on the ductwork in your new house or to rebuild what you have, this might be what they this is a 14 inch. They have all the way down to 6 and 4 inch. It goes together like so you want to make sure this groove goes inside that not really set up to do it.

But you bend it in and it connects together like. Believe me, this stuff will cut you. So be very, very careful right there.

That lips got to go in there. And then when you get that lip in there, you put a screw see how that lip goes underneath you put a screw here, zip screws, little quarter inch screws and it holds it together. Also, if you notice, this is your pinched in side that end we'll go over that end and then you put screws and then tape on each one of those.

There you go. All different sizes do the same thing.

🙏 Subscribe, 👍, it helps a lot!!
➤❓/ 💬: ask@straightarrowrepair.com
➤ Follow https://straightarrowrepair.com/pipf

➤➤I get a little for the channel-no charge for you if you use the links:
➤➤Shop Amazon https://amzn.to/3CxD1T4
➤➤Tool lists & recommended products🧰 https://straightarrowrepair.com/0lvf

➤➤Services We use
➤➤MORNINGFA·ME https://morningfa.me/invite/StraightArrowRepair
➤➤A2 Hosting http://www.a2hosting.com/refer/140244
➤➤Tubebuddy https://www.tubebuddy.com/StraightArrowRepair
➤➤Apsumo http://fbuy.me/v/philbridges
➤➤VidIQ: https://vidiq.com/straightarrowrepair

#HVAC, #HVACMetalDuctwork, #ductingwork