Metal Roof Valley Install for home, mobile home, commercial buildings

How to measure and cut the metal on a valley for metal roof.

⏱️⏱️Chapters⏱️⏱️
00:00 One of the tricky parts of doing a valley
00:48 Want to find the angle
01:06 Take a squared off piece, generally 36"
01:37 Keep it square with the piece you're measuring from
01:48 Other side even with the line you popped
02:05 Measure where you will lap, not the edge
02:30 When you get your angle, that will tell you where to pop a line to keep square
02:50 Measure up the roof
03:22 Cutting once you have your measurements
04:20 Here's where your angle comes in, go 38 1/4 up
05:10 How to cut if you work by yourself
06:10 Pop your line to cut the metal roofing
06:35 Types of snipes you can use
07:05 Trick for cutting metal roofing
08:35 Trick when placing your metal-run it along the rib
09:20 Want to screw into your 2 ft centers, keeps metal on even during high winds
10:00 Stay 2-3" up because will put in valley foam
10:25 Now you know the valley angle, you should be able to pop your lines
10:35 Check at first then you know your angles
11:00 Metal roof valley going down need to determine the angle

🙏 Subscribe, 👍, it helps a lot!!
➤❓/ 💬: ask@straightarrowrepair.com
➤ Follow https://straightarrowrepair.com/pipf

➤➤I get a little for the channel-no charge for you if you use the links:
➤➤Shop Amazon https://amzn.to/3CxD1T4
➤➤Tool lists & recommended products🧰 https://straightarrowrepair.com/0lvf

➤➤Services We use
➤➤MORNINGFA·ME https://morningfa.me/invite/StraightArrowRepair
➤➤A2 Hosting http://www.a2hosting.com/refer/140244
➤➤Tubebuddy https://www.tubebuddy.com/StraightArrowRepair
➤➤Apsumo http://fbuy.me/v/philbridges
➤➤VidIQ: https://vidiq.com/straightarrowrepair

#MetalRoof, #CommercialMetalRoof, #MetalRoofValley