DIY Remote Controlled Electric Lawnmower

260322 Like and subscribe. This is an archive, check the link in the end if you are. This is a rebuild of an RC lawnmower i built several years ago,
but using an electric mower this time. It pretty much operates
the same way an RC car / battlebot type vehicle does with just
two opposable motors and casters for front wheels.

In the future I plan to outfit the mower with FPV so that i can
drive it from inside the house, and possibly do automation even
further down the road.

Here's a list of my hardware:

- (2x) 35 A-h 12V lead acid batteries

- 275-Amp battery disconnect switch
https://www.amazon.com/gp/product/B07T288VN8/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

- Turnigy 9x 2.4 GHz transmitter / reciever (100 mW tx power, i think)

- Sabertooth 2x32 dual brushed ESC (32 Amp / 33.6V max.)

https://www.dimensionengineering.com/products/sabertooth2x32

- 1" x 1" x 1/16" thick square tubing, welded with 0.030" flux cored wire

- (2x) 80mm 12V fans

Music:

Kevin MacLeod - George Street Shuffle
Heatley Bros. - Dimension Drift
Heatley Bros. - Sunset Beach
https://rumblevideoarchive.wordpress.com/