Flashforge Dreamer (NX) Using a 0.2mm Nozzle and a Glass Print Bed - Part 3b

This video series shows my experience with a 0.2mm nozzle and a glass print bed to print Star Wars credits for my Etsy store that have fine detailed lettering on both sides.

Part 1 covers:
1) Comparing the 0.2mm nozzle to the 0.4mm nozzle I typically use.
2) Installing the nozzle in the printer.

Part 2 covers:
1) Testing the nozzle with the standard FlashForge print surface.
2) Trying a glass surface.

Part 3a covers:
1) What I learned after a month of printing on glass with a 0.2mm nozzle - Part A

Part 3b covers:
1) What I learned after a month of printing on glass with a 0.2mm nozzle - Part B

Here's a link to the double-sided Star Wars credits I printed with this setup:
https://www.etsy.com/listing/1157516314/star-wars-the-book-of-boba-fett-new

Here's a link to the 0.2mm nozzle on Amazon:
https://smile.amazon.com/dp/B01LOYIGYM

Here's a link to the needle kit:
https://smile.amazon.com/dp/B07KC6VTDF

Later I found a set of 0.2mm needles by themselves (might be out of stock):
https://smile.amazon.com/dp/B06X15JCDS

Here's a link to the glass print bed I used:
https://smile.amazon.com/dp/B00WW58DXW

Here's a link to the binder clip set I bought since I wasn't sure exactly which size I needed:
https://smile.amazon.com/dp/B07DXSBT5J

These are the spatulas I used to help remove the pieces from the print bed:
https://smile.amazon.com/gp/product/B075SLTY8B/

These are the tweezers I used to help remove dripping filament from the print head:
https://smile.amazon.com/gp/product/B0845SKD7Z/

The wire brushes I use are no longer sold on amazon, but here's something similar:
https://smile.amazon.com/ABN-Inch-Detail-Brush-3-Piece/dp/B0195PCMF6/

Flashforge Dreamer NX on Amazon:
https://smile.amazon.com/gp/product/B07DPBRCYZ/

-------------------
Link to my Etsy Store:
https://www.etsy.com/shop/BetaCygniDesigns

---------------------
End Screen Video Acknowledgement: Cosmic Reef Video produced by NASA and the Space Telescope Science Institute (STScI).
https://hubblesite.org/contents/media/videos/2020/16/1277-Video