Flashforge Dreamer (NX) Using a 0.2mm Nozzle and a Glass Print Bed - Part 3a
This video series shows my experience with a 0.2mm nozzle and a glass print bed to print Star Wars credits for my Etsy store that have fine detailed lettering on both sides.
Part 1 covers:
1) Comparing the 0.2mm nozzle to the 0.4mm nozzle I typically use.
2) Installing the nozzle in the printer.
Part 2 covers:
1) Testing the nozzle with the standard FlashForge print surface.
2) Trying a glass surface.
Part 3a covers:
1) What I learned after a month of printing on glass with a 0.2mm nozzle - Part A
Part 3b covers:
1) What I learned after a month of printing on glass with a 0.2mm nozzle - Part B
Here's a link to the double-sided Star Wars credits I printed with this setup:
https://www.etsy.com/listing/1157516314/star-wars-the-book-of-boba-fett-new
Here's a link to the 0.2mm nozzle on Amazon:
https://smile.amazon.com/dp/B01LOYIGYM
Here's a link to the needle kit:
https://smile.amazon.com/dp/B07KC6VTDF
Later I found a set of 0.2mm needles by themselves (might be out of stock):
https://smile.amazon.com/dp/B06X15JCDS
Here's a link to the glass print bed I used:
https://smile.amazon.com/dp/B00WW58DXW
Here's a link to the binder clip set I bought since I wasn't sure exactly which size I needed:
https://smile.amazon.com/dp/B07DXSBT5J
These are the spatulas I used to help remove the pieces from the print bed:
https://smile.amazon.com/gp/product/B075SLTY8B/
These are the tweezers I used to help remove dripping filament from the print head:
https://smile.amazon.com/gp/product/B0845SKD7Z/
The wire brushes I use are no longer sold on amazon, but here's something similar:
https://smile.amazon.com/ABN-Inch-Detail-Brush-3-Piece/dp/B0195PCMF6/
Flashforge Dreamer NX on Amazon:
https://smile.amazon.com/gp/product/B07DPBRCYZ/
-------------------
Link to my Etsy Store:
https://www.etsy.com/shop/BetaCygniDesigns
---------------------
End Screen Video Acknowledgement: Cosmic Reef Video produced by NASA and the Space Telescope Science Institute (STScI).
https://hubblesite.org/contents/media/videos/2020/16/1277-Video
-
4:16
ryanhoguepassiveincome
23 hours agoElevate Amazon Ads brand content with your Brand Store
39 -
16:19
RealReaper
15 hours agoThe Acolyte Is Unwatchable
17114 -
11:29
Ethical Preparedness
10 hours ago2 EASY Ways: Make Insect Bite & Sting Medicine - Medical Prepping for SHTF - Natural Medicine
32 -
15:52
JoBlo Horror Originals
22 hours agoThe Watchers Review: Shyamalans Sure Do Love Their Twists
3681 -
31:49
MichaelBisping
23 hours agoBISPING & ANIK: Is Conor McGregor INJURED?! | Who Could Replace Him? | What's next for Poirier?
2663 -
16:00
Space Ice
16 hours ago'Resident Evil: Retribution' Is So Bad It's Like Looking Into A Mirror - Worst Movie Ever
1.09K10 -
23:59
Degenerate Plays
12 hours agoThe Denny's Dictator Impresses Women - Call Of Duty Modern Warfare Remastered : Part 5
75 -
1:13:51
Blue Siesta ASMR
21 hours agoASMR Sims 4 Gameplay | New Roommates Move in Tiny House | already dating? 😱 Soft Spoken
2242 -
46:53
Chrissy Clark
14 hours agoAn Anti-Boomer, Anti-Cringey Podcast w/ Allie Cluff
6.09K29 -
9:07
shaneyyricch
12 hours agoAddressing my beef with Harry Sisson
17.4K26