wonkster1970

In this video, I replace the work out starter clutch in the 1983 Honda Shadow VT750C. I installed a good used one that I had in my spare parts bike. I hope that you enjoy this video. Thanks for watching. Stay Safe!

In this Video, we are on a dune buggy ride in Huacachina, Peru. I hope that you enjoy this video. Thanks for watching.

In this video, I replace the failing brake and clutch master cylinder on my 2003 Toyota Matrix.

In this video, I restore the fuel tank on my 1985 Honda Shadow VT700C. The previous owner had a poor paint job on it. I had cleaned out the tank due to a lot of rust. The tank then sprung a leak. I treated the tank with POR. Then I stripped, sanded, primed, and painted the tank. i hope that you enjoy this video. Thank you for watching!

This is a short video of the carbs being synced on the 83 Honda Shadow.

This is a short video of the Vodoo slip on cafe racer exhaust that I installed on my 1985 honda Shadow VT700c. Enjoy! Stay safe!

This is a video of the new Vodoo exhaust I put on my 1985 Honda shadow vt700c and the aftermarket exhaust that came with my 1983 honda shadow vt750c. Enjoy! Stay safe!

In this video, I get pulled over by the local police for making an illegal left turn. I wasn't aware that I couldn't make a left hand turn between the hours of 6 am and 6 pm. Fortunately, the cop was nice about it. I hope that you enjoy this video.

The rear tire kept going flat on my 1985 Honda Shadow VT700C. I had previously installed a new tire and cleaned up the rim while I had it off. I neglected the valve stem though. I decided to spray some soapy water on the valve stem. When I did that, I got a lot of bubbles indicating that there was a leak. This video is me taking the tire off, replacing the valve, and reinstalling it. It's still holding air! Enjoy! Stay Safe!

I recently purchased a used Harbor Freight motorcycle lift table from Facebook Market Place. This is me unloading it and going over some of the features. Thanks for watching. Stay safe.

In this video I start up the 1100 Vstar that I had worked on. Before the repairs it was popping through the exhaust. Ended up having fowled plugs and a sticking float on one of the carbs. I cleaned and adjusted both carbs and replaced the spark plugs. I hope that you enjoy. Stay Safe!

In this video, I install a set of Eastern Bike Tires on my GT Mountain Bike. https://www.amazon.com/gp/product/B08676X5GZ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

In this video, I replace the front turn signals on my 1985 Honda Shadow VT700C. I hope that that you enjoy the video. #hondashadowvt700c #1985 #turnsignals

This will be the 3rd time that I've had the front brake calipers off. This time I'm going to be replacing the pistons in them. I hope that you enjoy this video. @brakecrafters

This is an update of the Dimplex heater that I installed last year. Enjoy. Thanks for watching.

In this video, I replace all of the caliper pistons on my 1986 Honda Shadow VT700C. I thought that I could get away with not replacing them before. I ended up will the same brake drag that I had before. Hopefully this was the fix. Thanks for watching. Stay safe!

In this video, I rebuild the front brake master cylinder. Previously, I had rebuilt the right brake caliper thinking that corrected the brake drag issue. I was wrong. The ghost in the machine came back to haunt me again. I ended up laying the bike over in the grass by the garage. Now, after breaking the right front turn signal and bending the handlebars, I continue my quest. That quest is to resolve this brake drag! More to come! Thank you for watching! #brakedragfix #mastercylinder #hondashadowvt700c

In this video I replace the bent handlebar on my 85 Honda Shadow VT700C. I had bent them when the front wheel locked and I laid the bike over in the grass. The replacement handlebar came off of a 1986 Honda Shadow VT500. Hope you enjoy. #hondashadow700 #handlebars #85vt500c

This is a video of me installing the Detroit Axle Suspension Repair kit on my 2001 Ford F150 Crew Cab. I condensed the footage from 2 hours down to a little over 8 minutes. I hope that you like it. Thank you for watching!

This is a short video of me snow blowing the 18" of snow that we received on February 2, 2021. I hope that you enjoy! Stay safe and warm!

This is a video of me replacing the rear brakes and rotor on my 2001 Ford F150 Crew Cab. I hope that you enjoy. Stay safe.

I recently purchased some vehicle dollies from Harbor Freight. I used them to move my 86 Camaro IROC-Z. They ended up working pretty good. I hope that you enjoy this video. Thank you and stay safe! #pittsburgautomotive #harborfreight #vehicledollies #1986 #IROCZ

In this video I ride the 1984 Honda Shadow to a friend's house in Millerstown, pa. I ride through a section of Perry Valley roads on my way to there. The weather was in the low 30s. Some of the repairs that I've done to this motorcycle so far are: Front master cylinder; carbs cleaned; fuel lines; fuel tank rust removal; new front tire; speedometer and tachometer cable; used seat; and rear grab bar. I hope that you enjoy the video. Make sure to like and subscribe. #1984 #hondashadow500 #perryvalley #vintage #cruiser

In this video, I ride the 2001 Yamaha V star 650 from Fremont in Millerstown, pa to Tractor Supply that is just outside of Newport, pa. I'm following my friend that is riding the 1984 Honda Shadow VT700c that I fixed earlier this year. I hope that you enjoy. Thank you for watching! #vstar650 #yamaha #millerstownpa #newportpa

In this video, I replace the mainboard on the Roomba that I purchased from Marketplace. I found the replacement board on Ebay. I hope that you enjoy. Thanks!