tculligan9

Finishing up the garage floor with a second coat of floor epoxy.

Getting the garage floor coated with a layer of Garage Floor Epoxy Made by Rustoleum. It’s Battleship Gray with a Satin Sheen. Got it at Home Depot.

The last piece to go in and a short talk through on the custom shower.

Getting the last pieces done around the shower curb and setting the pipe wraps.

Getting the corners done with the inside and outside pre-built Kerdi Corners.

Kind of a long video that shows one of the last steps of getting the waterproofing membrane installed in custom shower.

Getting the shower curb completed with Schluter All Set and Kerdi premade Corners.

Part 9 of waterproofing installation using Schluter All-Set on Shower Floor around Oatey 24” linear drain.

Installation of membrane continued for custom walk-in shower. Using Schluter All-set.

Getting the left side of the shower niche waterproofed with Kerdi inside and outside corners.

Setting The inside and Outside corners on Custom Shower Niche to make it completely waterproof.

Using the Schluter-Kerdi outside corners to completely wrap and water proof around window.

Continuing on with the shower wall on both sides of the window. Using Schluter All-Set.

Getting the inside sill of the window wrapped and cutting the corners square. Using Schluter All-Set to bond membrane.

Putting a set of electric brakes on my single axle(3500#) trailer.

This is part 5 of the installation process.

Using Schluter All-Set to install Kerdi to get a waterproof shower.

Using Schluter All-Set to get the second strip of waterproofing membrane installed into custom shower.

Using Schluter All-Set to install waterproofing membrane for custom 7 head shower.

Using Schluter all-set to install the first piece of kerdi Membrane in custom shower.

One last coat of un-modified thin set before the water proofing layer goes in.

Getting shower walls floated out with un-modified thin-set. Also getting shower curb fiber taped and first coated with thin-set in preparation for water proofing membrane.

Using heavy duty Liquid Nails to glue the durarock to Oatey shower pan liner. This way no water will get through.

Getting the walk in shower ready for the Kerdi-membrane.

Getting the durarock ready to be coated and smoothed out with thin set.