jrsgarage

I was unable to find any videos for this service and so I figured I'd post this to help someone else. The rear brake is internal to the transmission. There is only one bleed screw on the rear left. The front brakes are internal to the front hubs and there is one bleed screw on each front left and right. Kubota DOT3 Fluid: https://a.co/d/a355Zy7

This video is a companion to my E46 clutch replacement video. You can see that video here: https://youtu.be/1tgQqwGGkk0. In this video I will explain the removal and replacement of the shift lever bushings in a 2004 325Ci BMW. Parts: Shift Lever Bushing: https://www.ecstuning.com/b-meyle-parts/bmw-bushing-gear-lever-bmw-3-e30-09-82-10-94-3-e36-09-90-08-00-3-e46-12-97-12-07-5-e28-06-80-12-87-5-e34-06-87-07-96-5-e39-/25117519669~mey/ Shifter Arm Bushing: https://www.ecstuning.com/b-genuine-bmw-parts/shifter-arm-bushing/25111222015/ Shifter Ball Bushing: https://www.ecstuning.com/b-rein-parts/shifter-ball-bushing/25111220600~ren/

In this video, I will explain how to replace worn/deteriorated windshield moulding/gasket on your BMW. This is my 2012 E93 but should be similar on many different BMW models. E93 Windshield Molding: https://a.co/d/ixnGa89

In this video, l will explain the process for recharging the AC system in a BMW E46. I will use an Autel Scan-Tool to read the BMW computer live data for high side pressure and evap temperature. This will apply to other vehicles of course but the pressure readings I show will be pertinent to limited models (do not ask me which ones - I can only say that I have a 2004 BMW 325Ci E46). This fixed my issue with warm air blowing out from the passenger vents. Autel MD806 Pro : https://a.co/d/fjvBLMN R134a : https://a.co/d/b3eMa9P

Video 3 of 3 where I show how to install the bearing and re-install the hub on a 1968 MGC.

This is video 2 of 3 where I show the process to remove and replace the front bearing in a 1968 MGC. In this video I show how to install the bearing race.

In this video I will remove the front hub in order to replace the inner bearing.