We need smarter energy policies - and our favorite scientist Mark Mills is on the job!
Polymath Mark Mills joins us again for a rousing discussion of what's ailing America when it comes to ensuring affordable and reliable energy.
Mark is putting the finishing touches on his new outfit - he's now the
Executive Director of the National Center for Energy Analytics. He joined us for Episode 118 to tell us about their first paper coming out about the deleterious effects of the SEC's new climate reporting requirements, and a whole lot more. Here are some more details:
3:50 - the needs for EV infrastructure
6:00 - the SEC's new regs (making my old pals at General Mills figure out how much CO2 is produced to make their Cheerios, for example)
9:30 - the effects of this kind of back-door legislation through regulation
11:50 - nothing exists without hydrocarbons
15:00 - the regulatory costs for manufacturers
21:40 - grid battery storage costs for given backup time periods (SHOCKING!)
25:30 - Germany goes all net zero and their electricity costs triple
27:15 - making the business environment friendly for manufacturing
30:00 - ROBOTS!
32:30 - humanoid robots in particular - why Mark is a fan
As with every time Mark visits us, this one is riveting and invigoratingly educational. Tune in for the whole thing!
Mark's new think tank: https://energyanalytics.org/
Mark's book that he mentioned at the start: The Bottomless Well: The Twilight of Fuel, The Virtue of Waste, and Why We Will Never Run Out of Energy
https://www.amazon.com/Bottomless-Well-Twilight-Virtue-Energy/dp/0465031161/ref=sr_1_1?crid=1AY8BDUQNYY72&dib=eyJ2IjoiMSJ9.Vrsp_5SSNXi8E7MKFBVYTy4m2Vnra_4p9yl4HafWFNXJ1shyctKA8m2U4Z9eEKbUcEwWtvjAsBg9drA8JODY_DPGFyGFZFNrXZRv_P-saP3tY-WDRpB8duyQL20zgm6S0dkZ-vnK89cV4Tqqt7DbKjOaO8XYG762Huc982xughh8-huccc1Nejpm6Xh8wD3MEAvlLQhNyvy-PWW7crgne3GY4SMPUNqlIMpCBrcHMVM.IFOef_KRgiYrOSK0_5aW09XFdUIqcXO0Zv7H35s4AWM&dib_tag=se&keywords=twilight+of+fuel&qid=1725926593&sprefix=twilight+of+fuel%2Caps%2C97&sr=8-1
25
views
1
comment
Are software vulnerabilities costing your factory big dollars? He's here to help!
Adam Gluck was a founding engineer on Uber's engineering strategy team, where got an early education in development and operations (DevOps). He quickly learned how industrial coding errors and cybersecurity breaches are increasingly a very costly Achilles heel for manufacturers.
He founded Copia Automation to help tackle the problem, so it was extremely educational to have him join us for Episode 117. Here are some highlights:
2:15 - DevOps
4:00 - Copia and industrial DevOps
5:30 - source control: testing, deployment, and monitoring
7:00 - device links and backup
9:00 - problems in industrial coding
10:00 - the compounding of the problem with much more automation coming
16:00 - the disconnect between popular apps and industrial programs
18:30 - "shadow IT" - who's touching your software??? (ad hoc changes)
19:00 - "the PLC stopped working"
23:00 - cybersecurity
25:45 - the governance control problem - source control
These are critical topics if you're in manufacturing, so do tune in and learn all about them!
19
views
They use 3D printing to make more environmentally friendly (and extremely cool!) furniture
Model No. produces high-end light fixtures and furniture with a new end in mind: elevating the experience while eliminating the waste. They collaborate with architects and designers along with industry partners to use regenerative and biodegradable materials.
It was a treat to have Phillip Raub, CEO of Model No., and Rahul Kasat, VP at 3D Systems, to talk about the methods the company uses to become more circular. Here are some highlights:
8:00 - the part material science development plays
10:00 - printing with biodegradable materials to reduce costs and increase value
11:00 - the new capabilities of 3D printers
15:00 - the kinds of printing materials used
22:00 - customer-driven R&D at 3D Systems
24:50 - contract manufacturing and partnerships as a part of Model No.'s business
27:00 - using recycled materials in 3D printing
And there's so much more! Tune in and check out the whole show - it's extremely educational and uplifting!
30
views
Jim Vinoski on why pork-driven plant construction spending doesn't make a manufacturing boom
There have been countless breathless reports about the ongoing "boom" in American manufacturing. After all, look at the countless billions of dollars being spent to build plants! Good times are back!
Except they aren't. Actual manufacturing activity is down, and has been in contraction mode for a long time.
Tune in and learn from your host why pork-fueled spending like what we're seeing now almost never delivers the goods when it comes to actual functioning, job-creating, value-delivering manufacturing plants. The "boom" we're seeing now is a bad episode that's been repeated again and again.
Bad enough that politicians constantly play this game, but to have people who ought to know better in our own world of manufacturing also getting suckered by this fairy tale now is really just too much.
Sources:
Granholm projects: https://dailycaller.com/2021/01/27/jennifer-granholm-michigan-energy-companies-bankrupt/
Inflation Reduction Act and Chips and Science Act delay and cancellations: https://seekingalpha.com/news/4141224-delays-impact-40-of-biden-administrations-biggest-climate-projects-ft
Whitmer administration projects: https://www.bridgemi.com/business-watch/michigan-has-spent-1b-ev-battery-plants-so-far-theyve-created-200-jobs
July ISM PMI report: https://www.ismworld.org/supply-management-news-and-reports/reports/ism-report-on-business/pmi/july/
25
views
How are maintenance fundamentals the foundation of good business? He's here to tell us
It was fascinating speaking with Nick Haase, who co-founded MaintainX to bring modern tech solutions to manufacturing maintenance. You'd think that's a pretty niche application, and yet almost every central element of his platform he brought up also proved to be a fundamental good business practice.
Here are the highlights:
2:40 - the MaintainX story
7:00 - the importance of user friendliness
10:00 - disconnects on software development
12:30 - integrating with other systems
14:50 - underutilized systems: OEM data, how to gather it, and how to make it actionable
20:00 - AI and machine learning
21:40 - the quality of data is critical: how to build a data foundation (1. capture structure, and store; 2. work towards predictive)
25:30 - the importance of knowledge capture and transfer for developing the workforce of the future
27:50 - augmented reality
Nick brought us a whole bunch to think about, but trust me - it will be worth every minute for you to tune in to the whole thing!
The MaintainX website: https://www.getmaintainx.com/
25
views
Running a family business? Workforce development? Cycling? Matt Guse says check, check, and check!
Matt Guse started in machining as a teenager and eventually took over the machine shop his dad founded.
Along the way he became a fierce advocate for his team members and for new ways to develop the workforce of the future. Oh, and a committed bicyclist just like your host, so be ready for some serious bike talk toward the end.
Here are some highlights:
4:00 - making the business work
5:20 - get help! Matt hired a part-time CFO
6:40 - find a mentor
7:10 - sports officiating lessons for business
12:20 - developing the future workforce: Cardinal Manufacturing (covered in a previous episode of Manufacturing Talks - see link below)
17:00 - appearing on Fox Business
20:40 - the importance of company culture
24:30 - a long chat about cycling
Matt brings some seriously inspirational ideas from his manufacturing and entrepreneurial experiences. Tune in and check out the whole show!
Links:
Our episode about Cardinal Manufacturing featuring Craig Cegielski: https://rumble.com/v4b50qk-he-runs-a-high-school-shop-class-that-is-its-own-small-business-cardinal-ma.html
The M.R.S. Machining website: https://www.mrsmachiningco.com/
29
views
Want to reduce absenteeism? She says to make it easier for your workers to communicate!
Calling off work is the easiest thing to do, right?
Maybe not, and maybe that breakdown in communications is costing you a lot more than you think.
Sheila Stafford, co-founder and CEO of TeamSense, joined us for Episode 112 to explain how her company's platform to facilitate offtime call-ins for your team members can actually reduce absenteeism and improve productivity.
Sheila learned all this firsthand in her time on the floors of various manufacturing operations. The dysfunctional communication methods she witnessed for herself inspired her to help found and launch TeamSense.
Here are some highlights from our chat:
7:30 - manufacturing-specific design - careers vs. jobs
8:40 - it's not an app, so people don't get bent out of shape about you commandeering their personal devices
11:00 - remove manual processes and multiple different contact methods, and automate the data
12:30 - fix language barriers!
18:30 - it's an employee portal!
22:00 - facilitate schedule and vacation management
25:30 - future opportunity: leverage AI to add more automation
Tune in for an extremely educational conversation!
The TeamSense website: https://www.teamsense.com/
27
views
Manufacturing digitalization? Heck yes - these guys are here to tell us why and how!
Alex Krüger is the co-founder and CEO of United Manufacturing Hub (UMH), our subject company, and Frank Thelen is co-founder and CEO of Freigeist, a venture capital fund that's backing them. They joined us for Episode 111 to explain all about why digitalization is now a must for manufacturing companies, and how you can best go about it. Here are some of the highlights:
5:30 - your digital use case and single source of truth
11:45 - how to build internal tech innovation - it has to become part of your company's DNA
14:00 - how to make your data actionable
19:00 - reduce complexity and try something out
24:00 - get manufacturing people and the manufacturing world involved
Find out how UMH is helping manufacturing companies become tech companies, and learn some specific changes you can make so you don't get left behind in this critical transition.
47
views
Wanna hear about the totally cool Giant Magellan Telescope?
Bruce Bigelow joins us for Episode 110 to share the latest and greatest in one of the biggest coming pieces of science technology ever. The Giant Magellan telescope, which is being constructed in Chile, will open up vistas of our universe we couldn't even have dreamed about a few years ago.
This instrument features some extraordinary designs and manufacturing methods that enable it to do what it will be able to do. Bruce tells us all about them, and about where things stand on the building of this amazing scientific tool.
Their website: https://giantmagellan.org/
The latest news: https://www.globenewswire.com/news-release/2024/06/13/2898457/0/en/Giant-Magellan-Telescope-Enclosure-Ready-for-Construction.html
My Forbes article: https://www.forbes.com/sites/jimvinoski/2022/08/02/magic-mirrors-will-power-the-giant-magellan-telescope/
54
views
How do you grow a fifth-generation family company? Matthew Nix says diversify!
Multiple generations of ownership of a family business make for a great story - but they also historically make for increasing difficulties in making the business work. Matthew Nix. President and CEO of Nix Companies, took the industrial company that his ancestors originally started as a blacksmith shop over 120 years ago and with the help of his wife and brother and others, grew it through acquisitions to include custom fabrication, maintenance services, real estate and other business areas.
In addition to creating a true success story with the family business, Nix also helps set the example of valuing people and doing good for society by doing well as a business.
Tune in and hear Matthew tell the whole inspiring story!
Nix Companies website: https://www.nixcompanies.com/
Making Chips website (where you can find Matthew's content): https://makingchips.com/
85
views
Tommy's Express does manufacturing too? Yep - he's here to tell us why...
Who knew the fast-growing car wash smash hit company Tommy's Express is also into manufacturing?
When you learn why, it makes perfect sense. Ed Ouellette, the company's National Franchise Development Manager, joined us for Episode 108 to explain how so many of the cool and user-friendly features you see at Tommy's are there because they make them for themselves!
Listen at around the 12:45 mark when Ed explains how that easy-to-drive-onto conveyor belt came from the carrot processing industry.
Stay for his explanation at around 26:00 about how consistency is the key!
There's a whole lot more before, in between, and after - check out the whole thing! And leave your questions and comments for us, and do please leave us a like, share the show, and subscribe!
69
views
2
comments
Clare Epstein from Vector Solutions talks about the latest and greatest in keeping your workers safe
It should be job one for everyone, but especially for manufacturers, to ensure the people who work for us go home every night in at least as good condition as they were in when they showed up for the job.
Among other offeringss, Vector Solutions focuses on providing training that helps make that happen every single day. Clare Epstein, Vector's General Manager, Commercial Business Sector, joined us for Episode 107 to tell us all about it.
This one's important, folks - tune in the for the whole thing!
Link to the study Clare mentioned: https://drive.google.com/file/d/1_QFsPHT5LUpb9CW9TTckMBxkZty2VBm-/view
Vector Solutions homepage: www.vectorsolutions.com
** My apologies for the echo on my audio! Fortunately I was smart enough to let our awesome guest do most of the talking.
52
views
Lori Waiser and Brian Hollowaty of Los Angeles Brands tell their manufacturing success story
Nothing like throwing yourself a challenge! Los Angeles Brands has its production of skin care and beauty products right there in the LA area, just to make things interesting. Then they launch their products against some of the biggest, best-known, and best-funded brands there are!
Lori Waiser and Brad Hollowaty joined us to tell us how they do all that successfully. There are a couple of big reasons we learn along the way, like how the two of them make a very powerful team by each bringing very different strengths to the mix, and how having a foot on both coasts (Brad and the HQ are out west, while Lori and her product expertise are in the New York City area) is a huge advantage.
Other highlights:
13:00 - ask a lot of questions
14:40 - in this area of corner of business, manufacturing in the US is critical
16:00 - cost and regulatory challenges
20:30 - finding areas of white space to go after, and their innovative business model
24:50 - product advantages and creating differentiation
It's one heck of a great story, and Lori and Brian tell it extremely well! Check out the whole show - you'll be glad you did!
Oh, and here's their business link: https://losangelesbrands.com/
56
views
Paul H. Tice tells us about his dire warnings about ESG and global finance from his recent book
This is the most important episode we've done so far. That's because, if we don't heed the call to action from author Paul Tice in his book, *The Race to Zero: How ESG Investing Will Crater the Global Financial System,* our economy and our way of life are doomed. He joined us for Episode 105 to tell us why.
According to Tice, ESG - standing for environmental, social, and governance - investment mandates that were put together by a host of bad actors in the environmental activism and global governance realm are now being put into action by national regulatory bodies. And what they essentially do is commandeer everyone's investment dollars to serve their impossible net-zero agenda.
Here are some of the main points from the episode:
6:20 – ESG is “the corporate equivalent of inviting a vampire into your house.”
9:15 – ESG is the funding mechanism for the climate change agenda
10:30 – the illuminating example of the Dakota Access Pipeline story
17:00 – the lackluster response from the energy companies about the assault on their existence
23:30 – IEA says by 2025, no more investment in oil and gas
29:25 – the case for optimism
35:00 – aggressively going after the crowd who are destroying finance – antitrust and the Sherman act, RICO, and the like
40:55 – why logic won’t work
It's vital you learn all about Tice's warnings, because time is short and your future depends on it. Check out the whole episode, and do also check out the links for his books and his new place of research "residence" at the links below.
Book link: https://www.amazon.com/Sustainable-Investment-Scam-Progressive-Financial/dp/1641773472/ref=tmm_hrd_swatch_0?_encoding=UTF8&qid=&sr=
National Center for Energy Analytics: https://energyanalytics.org/
94
views
Quality guru Michelle Brydalski gives us the all the latest scoop about food safety
The terrible headlines of recalls and foodborne illnesses can have people thinking our food supply is a disaster. But the fact is that while it's safer now than at almost any time in the past, there are always places where our producers can improve. Michelle Brydalski, VP of Food Safety, Quality, and Regulatory at Charcuterie Artisans, joined us to tell us all the latest when it comes to the safety of the food we buy and eat. Your host can vouch for her personally - he had the great pleasure of working with her at General Mills some years back!
Tune in to hear what our food processors do to make sure what they make is safe, and where there are some challenges to be addressed. Michelle tells it like it is, whether it's celebrating the great work our manufacturers do, or highlighting the areas that still need more work.
Oh, and if you've got a food-oriented startup or small company that needs help to make sure you have all your bases covered, you should give Michelle a call!
55
views
Isaac Orr and Mitch Rolling of Always On Energy Research on why we're heading for an energy disaster
Having just founded Always On Energy Research, Isaac Orr and Mitch Rolling -experts on power generation and our creaky grids - joined us to give us their unique perspectives on America's electricity situation. They publish routinely on the subject on their Substack, "Energy Bad Boys."
Isaac is the VP of Research and Mitch is the Director of Research at their new outfit, and they bring incredible depth to this critical discussion. Here are some highlights:
7:00 - why the levelized cost of electricity measure is misleading
10:50 - MISO and the shutdown of its coal-fired power plants
16:45 - the closure of the Metal Technologies Northern Foundry in Hibbing, Minnesota, because of high electricity prices
19:00 - our need to build reliable power generating plants, particularly nuclear
Tune in and learn a whole lot more about this vital topic!
Isaac and Mitch's Substack: https://energybadboys.substack.com/
Always On Energy Research website (not active as of this show's date, but keep checking back!): aoenergy.org
65
views
Konstantin Christoulakis shares his encyclopedic knowledge of metal markets and mining
For our 102nd episode, your host is joined by his pal who helped him with a Forbes article about mining a year ago, and who has been his go-to guy for metals intelligence ever since.
Konstantin Christoulakis is a senior manager of procurement and risk for a metals trading company, and has oodles of experience in supply chains in general. He talks about the coming demand for metals, especially copper, and how today's mining isn't positioned to fill that demand. He offers his thoughts on why that is and what we should do to start fixing it.
Konstantin's in-laws were miners, so in addition to his intensive career experience in the metals world, he also has some close contacts who have helped shape his understanding of that side of our critical supply chains.
Tune in and get ready for some serious learning!
Additional resources:
The Forbes article Konstantin helped with - https://www.forbes.com/sites/jimvinoski/2023/04/28/theres-not-enough-copper-for-our-electrification-plansand-biden-is-making-it-worse/
The slides Konstantin refers to near the end - https://ln5.sync.com/dl/7f317fb40/vafuzx3k-hh7dp8ke-kv3tr3xy-6u3dxzgf
72
views
Your host Jim Vinoski explains how Biden's regulations blitz is the industrial suicide of America
In a recent Forbes article, your host explained how Germany was undergoing the beginnings of deindustrialization as a result of its horrible energy policies, and how that should be a warning to America.
Unfortunately the current administration's regulatory policies now have the US on an even worse path than Germany. This is an existential threat to all of American industry, and it's past time for manufacturing leaders to start doing what the farmers have been doing in Europe.
Tune in and hear Jim Vinoski explain it all, and please comments, share, and subscribe.
Here are some links to what Jim talks about:
German deindustrialization Forbes article: https://www.forbes.com/sites/jimvinoski/2024/02/29/german-deindustrialization-is-a-wake-up-call-for-us-manufacturers/?sh=781e22dc7c0c
Biden regulatory blitz: https://www.wsj.com/articles/biden-congress-regulation-administrative-state-democrats-republicans-government-agencies-1c40da77
John Hinderaker's piece at the Powerline blog on the recent EPA power plant insanity: https://www.powerlineblog.com/archives/2024/04/us-set-to-regress-from-modernity.php
Explanation of the ongoing Supreme Court review of the Chevron case: https://www.scotusblog.com/2024/01/supreme-court-likely-to-discard-chevron/
97
views
Our gravelly-voiced announcer John Farabee joins us for Episode 100 to talk supply chains
Yes indeed, Episode 100 is upon us! We could have a celebrity or a head of state as a guest, but it was obvious the right choice was a guy that fans of the show have heard from many times before! John Farabee, our intro and outro voice-over guy, is also one of the most knowledgeable and insightful supply chain gurus we know. So as the only other guy besides our host whose voice has appeared on every episode, it only made sense to finally have him share his thoughts on that topic that has had pretty much everyone's attention since the dark days of Covid.
Tune in and hear first his Lou Holtz quote that is his guiding supply chain principle, then stay tuned for the whole thing as John shares his deep wisdom about the state of our supply chains now, the lessons we should have learned from the drama of the past few years, and where things are headed.
And be sure to stay till the end when John and our host, both tremendous believers and and supporters of the Boy Scouts of America, share their thoughts on why that program is more crucial than ever for our young people.
One last note: John mentions another old friend of the show, Dean Wegner, whose company Authentically American is a story John is particularly fond of. You can find Dean's stuff here: https://www.authenticallyamerican.us/
110
views
Artem Kroupenev from Augury talks about using AI to improve plant capacity and predictability
Augury got its start using a unique way to monitor manufacturing machine health: the sound of the equipment! It's one of those ideas that, once you hear it, seems so blindingly obvious - except you didn't think of it!
Now they have over 150 of the largest manufacturers as customers, and they continue to grow.
The company uses AI to reduce waste and downtime and to improve processes in all kinds of industries. Their VP of Strategy, Artem Kroupenev, joined us for Episode 99 to tell us all about it.
Tune in and learn about the whole story, and how they might help you!
Augury website: https://www.augury.com/
Link to your host's 2019 Forbes article about Augury: https://www.forbes.com/sites/jimvinoski/2019/09/30/the-machine-whisperers-this-startup-improves-machine-health-through-digital-transformation/
121
views
2
comments
David Schild and the PCBAA are on a mission to rebuild America's printed circuit board industry
Like too much of American manufacturing, our domestic production capacity for printed circuit boards - the things on which the computer chips that power so much of our world anymore reside - departed decades ago for other lands.
Now we're too dependent on foreign nations for that supply, and especially worrying is how much we're dependent on a potential geopolitical adversary.
David is executive director at the Printed Circuit Board Association of America, and he joined us for Episode 98 to tell us how we lost this vital industrial capability and what he thinks we need to do to get at least some of it back.
Tune in and check out the whole story!
453
views
Frank Seidel of Wamser Batra USA explains why and how US manufacturers should expand into India
Manufacturing looks like it's turning the corner here in the US, so now is a good time for our domestic producers to look at expanding their businesses. Frank Seidel, Managing Director at Wamser Batra USA, thinks India is a great market to look at, and he joined us to tell us why that is and what companies here need to do about it. He looks at demographics and income growth and says India beats China as a growth market hands down.
Now, to be fair, what Wamser Batra USA does to make their money is to help companies do exactly the above. But Frank didn't join us for a no-hold-barred sales job - he brought practical advice on how to get started, what to do along the way, and how to succeed at what he says has to be a long-term play. Here's a timeline with some highlights:
7:20 - the importance of due diligence
10:40 - why it's critical company leaders actually go to India
14:30 - why you should bring the CEO of any Indian company you're going to partner with here to the US
17:40 - the different production options, like making here and exporting there, making domestically for each separate market, or making there and importing here
There's a whole lot more great advice and concrete steps to take. It boils down to what Frank shared with me separately: "Don't just go to India because it looks like a good opportunity. Make sure it's the right fit for your business."
Tune in and check out the whole thing!
459
views
Shawn Connors of the Atomic Garage Movement explains why he's a staunch advocate for nuclear energy
At one time, when he lived in the shadow of southwest Michigan's Palisades nuclear power plant, former business owner, author, and employee communications guru Shawn Connors opposed nuclear energy. But then he decided to do his own research and discovered that the horror stories in the media that had convinced him nukes were dangerous were just plain wrong.
That's when he founded the Atomic Garage Movement, which uses the arts to help convince people that nuclear energy is safe, clean, and reliable.
He has also written both a nonfiction educational book and a fictional novel that both help tell the real story of nuclear energy (links below!)
He joined us for Episode 96 to tell us all about his conversion, and why he believes we should ditch all the arbitrary deadlines for replacing our electricity generating stations, stop retiring our coal and gas plants, and instead embark on a program to replace them when their production lives end with nuclear plants.
And about Palisades? He's revved up to see it reopened, and thinks it can help make Michigan a nuclear center for the nation.
Here are the links:
Books:
Non-fiction: The Quick Read Nuclear Energy Guide: 21 Easy-to-Understand Q&As - https://www.amazon.com/Quick-Nuclear-Energy-Guide-Understand-ebook/dp/B0CH8MNNH4?ref_=ast_author_dp
Novel: Chain Reaction: A Story About Power in the Age of Climate Change -
https://www.amazon.com/Chain-Reaction-Story-Climate-Change/dp/B0CGLH8M1P/ref=tmm_pap_swatch_0?_encoding=UTF8&qid=&sr=
Article that I read that first flagged Shawn's work for me: https://www.bridgemi.com/guest-commentary/opinion-wind-solar-arent-enough-case-palisades-nuclear-plant
Atomic Garage Movement site: https://atomicgaragemovement.com/
This episode aired originally on YouTube on March 26, 2024.
129
views
Simeon Wallis and Michael Lange from Aprio bring us the latest quarterly manufacturing outlook
Episode 94 once more features our friends from Aprio, a CPA-led advisory firm with over 700 clients in their Manufacturing and Distribution Practice. Simeon Wallis and Michael Lange join us to discuss their latest quarterly "Manufacturing and Distribution Insights" report, which is a great look into the state of business for American industry.
Simeon is Chief Investment Officer and leader of Aprio’s Wealth Management Practice, and Michael is Partner in Assurance Services at Aprio, so they bring a whole lot of expertise to the subject.
The latest issue had more good news for manufacturers, including a slight rise in manufacturing sentiment from the Institute for Supply Managers and a boom in plant construction spending. But there were also indications of weakening demand, and a fresh ISM report came out after we recorded showing a decline in the outlook of industry professionals. Michael and Simeon dive into all the details of their report and give their insights about the current state of things and where they think we're headed.
Tune in and hear the whole expert story!
View the Aprio quarterly insights report here: https://www.aprio.com/6-manufacturing-distribution-insights-from-q1-2024-and-what-they-mean-for-you/
This episode aired originally on March 12, 2024.
76
views
Ankush Malhotra talks about Fluke Reliability's use of AI to improve preventive maintenance
Fluke Reliability has been a mainstay in manufacturing maintenance for a long, long time. With tools like temperature and vibration monitors and acoustic and thermal imaging, they've helped make true preventive maintenance a reality for industry. So it was extremely informative for Episode 93 to chat with their president, Ankush Malhotra, about their recent acquisition of Azima DLI, which is helping supercharge Fluke's aggressive push into the use of AI for machine failure prevention.
Ankush gives us a deep dive into what Fluke has going on with its new efforts, and how they can help manufacturers of all kinds stay competitive in today's tough business environment.
Tune in and check out the whole thing!
This episode aired originally on March 5, 2024.
90
views