Featured
Featured
Texas Cobra Club Spring Meet Day 2
Day 2 of the Texas Spring meet starts with us getting together with friends Joel & his son Dillon, who we have not seen in a few few years. Ed and Kathy lead our group for the second day in a row out to a local airfield. After which we head to Gruene TX. for some site seeing and a bite for lunch. The afternoon cruise takes us along the Guadalupe River Road. We end the day with a stop at a local brewery, winery, distillery.
#factoryfive #factoryfiveracing #fordmotorsport #fordracing #blueprintengines #nittotires #mickeythompsontires
26
views
2
comments
Type 65 Coupe Cockpit Panel Final Install
In record time, about 3 days, we got our panels back from the powder-coater. Now we're ready to install the interior panels for the final time. Mrs.427 steps up and helps this feeble old guy with the bad back, to get them all in place and pop-riveted in place. Thanks to the Mrs.!
#fordracing #factoryfiveracing #fordmotorsport #factoryfive #Gen2Coyote #Mrsie437 #Type65Coupe #Cobra
60
views
Prepping For Powder-coat
This time, we fit all of our cockpit panels in preparation for powder-coating. In the process we circle back to get the wheel spacers the owner installed fit properly so they will accept the American Racing wheels we'll be using.
#fordracing #factoryfiveracing #FactoryFiveType65Coupe #americanracingwheels
7
views
Let's Get to Those Fuel Lines!!!!
We dive into the fuel lines for our Factory Five Type 65 Coupe using the Build Manual as our guide. Let's see how this all works out.
#fordmotorsport #fordracing #factoryfive #factoryfiveracing #Type65Coupe
23
views
1
comment
Adding a Tilton 3 Chamber Reservoir to Our Factory Five Racing Type 65 Coupe
We start by removing the single reservoir our Type 65 had installed on it when we got it and add this new reservoir from Tilton. We go through some.................. stuff, trying to get it all plumbed in. But in the end it all works out just fine.
#fordmotorsport #fordracing #factoryfive #factoryfiveracing #TiltonBrakes #wilwood #type65coupe
26
views
New Mexico to California, the Rest of the Trip Home
We head out from our first nights stay in Big Spring, Texas heading towards New Mexico. The next morning, packed up and ready to go, we travel towards Arizona staying in the small town of Williams. We have dinner with the former Mayor of Williams. A new day brings us to day 4 of our trip back to California and we almost feel like we're home. Day 4 wraps up with us home, safe and sound.
#fordmotorsport #fordracing #factoryfive #factoryfiveracing #nittotires #fordpowerstroke #looktrailers #2024eclipse #7point3powerstroke
23
views
2
comments
Texas Headed Home Day 1 Total Solar Eclipse
We head out and bid farewell to San Marcos, TX. Heading West, we hope to catch a glimpse of the once in a lifetime total solar eclipse that Texas may see. Our path home takes us to an area the local news has said, "may give us a view of the eclipse". With cloud cover most of the way this morning, we pull off the road in the County of LLano. Just as the clouds start to scatter, the eclipse starts. Follow along.
#fordmotorsport #fordracing #fordpowerstroke #looktrailers #2024eclipse
11
views
Texas Cobra Club Spring Meet Day 2
Day 2 of the Texas Spring meet starts with us getting together with friends Joel & his son Dillon, who we have not seen in a few few years. Ed and Kathy lead our group for the second day in a row out to a local airfield. After which we head to Gruene TX. for some site seeing and a bite for lunch. The afternoon cruise takes us along the Guadalupe River Road. We end the day with a stop at a local brewery, winery, distillery.
#factoryfive #factoryfiveracing #fordmotorsport #fordracing #blueprintengines #nittotires #mickeythompsontires
26
views
2
comments
Our Texas Spring Meet Day 1 Adventures
We head out of San Marcos TX. with our dear friends Ed & Kathy, tearing up the countryside and hill country nearby. We stop in a few spots along the way so watch till the end.
#factoryfive #factoryfiveracing #fordmotorsport #fordracing #nittotires #mickeythompsontires #blueprintengines #ie427garage
38
views
Texas Spring Meet..... Here We Come!
We head out on Easter Sunday to travel East towards Texas. Taking a leisurely 4 days to get there, we travel many of the back roads and highways. This gave us a chance to see parts of the States we had never been through before. Mrs. i.e.427 and myself really enjoyed the time in the truck, despite all of the rain we endured the first 3 days. We wrap up this video in San Marcos, TX. strolling the lot where all of the Cobras from around the Country came together.
#factoryfive #factoryfiveracing #fordmotorsport #fordracing #fordpowerstroke #looktrailers #7point3powerstroke
Copyright free music intro: Infraction by Vladimir Ershov
26
views
Our Brand New (to us) Pexto Stomp Shear
We picked up a 37" Pexto Shear. We've been using it for the past few months but you get to take a look back to when we brought it home.
#pextoshear #stompshear
Copyright free music intro: Infraction by Vladimir Ershov
20
views
Side Mount Garage Door Opener & High lift
On our last trip to Texas, we picked up a door opener for our shop door. We mount this a bit different than the conventional opener. It's relatively inexpensive vs the standard side mount opener and for our purposes, works just as we need it to.
#liftmaster #sidemountgaragedooropener #garagedooropener
Copyright free music intro: Infraction by Vladimir Ershov
18
views
Factory 5 Type 65 Coupe Fuel Pump & Hanger
This time around we start work on the Factory Five Racing Type 65 Coupe. The fuel system is up first and we get the fuel pump and hanger installed after removing the hanger supplied with the kit. We also take a brand-new roll of 3/8" Stainless tubing, cut it to length and send it through our tubing straightener to get it ready to install into the chassis.
#shelbycobra #factoryfive #factoryfiveracing #fordmotorsport #fordracing #fordcoyote #FactoryFiveType65Coupe
Copyright free music intro: Infraction by Vladimir Ershov
30
views
Our Ford F350 Powerstroke Dually Gets an Upgrade
After our most recent trip to Texas. Mrs. i.e.427 and myself decided that the current headlight situation for the F350 Dually was lacking. So with little nudging from her, I purchased a set of retrofit LED headlight bulbs for the truck. Follow along as we get the new bulbs installed into the truck and test them out.
#fordpowerstroke #fordmotorsport #fordracing #allaLEDheadlights
Copyright free music intro: Infraction by Vladimir Ershov
12
views
The "King" Cobra
The King family brought us their project to finish up for them. We start by pulling the body, doors, trunk deck and hood off of the car and give a rundown of where this
project is and where it's headed. This should be a fun build!
#shelbycobra #factoryfive #factoryfiveracing #fordmotorsport #fordracing
Copyright free music intro: Infraction by Vladimir Ershov
43
views
1
comment
DIY Sheet Metal Parts for Your Factory Five
Quick video today to help all of you out there making small sheet metal parts for your projects. Making straight cuts between two other cuts can sometimes be frustrating. We'll show you how we do it and how to end up with a better finished project in the end.
Link to 30" Bench Mounted Bending Brake:
https://www.harborfreight.com/30-inch-bending-brake-67240.html?_br_psugg_q=sheet+brake
#shelbycobra #factoryfive #factoryfiveracing #daytonacoupe
Copyright free music intro: Infraction by Vladimir Ershov
42
views
Timid to Drive Your Factory Five to Its Limits?
We invite a guest (Jeff Kleiner) into the discussion about a recent thread on one of the facebook groups. Jeff gives his insight on what he thinks the owner should do to better acquaint himself with his new car.
The Factory Five Forum can be found here: https://thefactoryfiveforum.com/content.php
If you'd like to join a good, family oriented, well informed facebook group for Factory Five owners and others, here is a link: https://www.facebook.com/groups/251681411988299/
#shelbycobra #factoryfive #factoryfiveracing #fordmotorsport #fordracing #looktrailers
Link to the facebook thread: https://www.facebook.com/groups/8593001091/posts/10161374242191092/?comment_id=10161376688306092¬if_id=1708996415471947¬if_t=feedback_reaction_generic&ref=notif
Copyright free music intro: Infraction by Vladimir Ershov
59
views
We Head Home from Texas on a Mission
This was a quick turn and burn to deliver the car.................. or was it? We head home and have a few surprises along the way. We even stop in Lake Havasu City to make a quick stop. Check out the good and not so good as we make our way back to SoCal.
#shelbycobra #factoryfive #factoryfiveracing #fordcoyote #fordmotorsport #fordracing #mickeythompsontires #fordpowerstroke #looktrailers @MerlinsOldSchoolGarage
Copyright free music intro: Infraction by Vladimir Ershov
17
views
Factory 5 Mk4 Heads Home to Texas
We pack-up and head out to Texas to get the Mk4 Prototype delivered to it's owner's. Traveling through SoCal into Arizona and onto New Mexico before finally making our way into Texas.
#shelbycobra #factoryfive #factoryfiveracing #fordcoyote #fordmotorsport #fordracing #mickeythompsontires
Copyright free music intro: Infraction by Vladimir Ershov
20
views
Loading Up for Texas
We start the process of loading up the Prototype and all of the excess parts to head them out to the car owners. Follow along and we get it all loaded up in the trailer and get ready to leave for Texas.
Copyright free music intro: Infraction by Vladimir Ershov
#factoryfive #factoryfiveracing #fordcoyote #fordmotorsport #fordracing #shelbycobra #shelbycobra
28
views
Race Trailer Electrical Inlet
We add a NOCO GCP1 AC Port Plug and a 12 volt charger port to our Look Vision Race Trailer.
Link to NOCO products: https://no.co/gcp1
AC Port Plug With 16 Inch Extension Cord
The GCP1 is an AC Port Plug with an integrated extension cable (16-inch) that offers optimal flexibility and ease of installation. It can mount to the exterior of any vehicle to make the charging port more accessible. Quickly plug-n-play with any extension cord. It requires zero cable modifications or hard wiring. Its sleek, ultra low-profile design works seamlessly on any application and includes a snap-fit cap for a watertight seal. Perfect for engine block heaters, battery chargers, home improvement and much more - it has endless possibilities. Rated for use at 15 amperes, 125 volts, UL certified and fits into any standard 2-inch hole size.
#LookTrailers #NOCOGCP1 #ie427garage
6
views
i.e.427 Turn Signal Switch
We introduce you all to our brand-new turn signal switch and run through all the parts and it's functionality. This turn signal system took us nearly 5 months to bring forward and after a number of beta testers we went into preproduction to get 8 more units out into the Factory Five community. We've had a ton of positive feedback and hope to keep up with the demand that we've had since the product was introduced. Thank you to all have supported us with this product.
15
views
Factory Five Mk4 Prototype is All Done
We drag our Factory 5 Racing Mk4 Prototype outside to snap a few pictures of the completed project. Follow along as we video and still picture out at two different locations.
#factoryfive #fordcoyote #fordmotorsport #fordracing #shelbycobra #factoryfiveracing #mickeythompsontires
27
views
Factory Five Mk4 Prototype Gets a Little Fresh Air
Nothing too glamourous. Just Mrs. i.e.427 and I moving projects around the shop.
#factoryfive #fordcoyote #fordmotorsport #fordracing #shelbycobra #factoryfiveracing #Type65Coupe #DaytonaCoupe
26
views
Factory Five Mk4 Prototype Cleanup & Detail
When is it no longer the prototype? Well, that's the name of this one. If you've watched this one from the beginning you'll know how it got it's name. And names are always capitalized. So "The Prototype" is always going to be a prototype. This time around we blow off all the dust and start the detail process for this car. It really turned out beautiful!
#factoryfive #fordcoyote #fordmotorsport #fordracing #mickeythompsontires #shelbycobra #factoryfiveracing
Copyright free music intro: Infraction by Vladimir Ershov
119
views
2
comments