1972 Dodge Challenger - New parts, tools, and IT WON'T RUN
In Episode 2, we're replacing all the spark and fuel thingamajigs in the Dodge. We've got new plug wires, coil, resistor, plugs, and a shiny new Holley 750cfm carb.
We're so close to getting it running, but something is still off.. Time to phone a friend maybe!
On a more important note, to whoever sent the Autel scanner, THANK YOU. There was no note included, and I'm out of ideas who it could have come from. I'm truly thankful and humbled by this.
Check out our links below:
Insta: https://www.instagram.com/dachsautos/
Teespring: https://dachs-autos.myteespring.co/
Patreon: https://www.patreon.com/dachsautos/
#mopar #challenger #restoration #autel
70
views
1
comment
https://youtu.be/zAXioKAuZtg
We are wrapping up the last bit of our Great Western shop! We've had our 4 stable doors boarded up for the winter, and need to get them wrapped up for final inspection.
Check out our DIY Dutch Doors!
RR Buildings on YouTube: https://bit.ly/2Q01qic
Great Western Buildings: https://greatwesternbuildings.com
Hardware Source (hinges): https://www.hardwaresource.com/steel-wide-throw-butt-hinge.html
Check out our links below:
Insta: https://www.instagram.com/dachsautos/
Teespring: https://dachs-autos.myteespring.co/
Patreon: https://www.patreon.com/dachsautos/
#steel #building #erection #greatwesternbuildings #greatwesternsteel #construction #barn #polebuilding #shop
48
views
2005 Ford F-350 Brake Bleed & Flush
Today we're bleeding and flushing the brakes on Truck Norris.. Having just replaced all the calipers, rotors, and pads, it's also time to flush the brakes with the miles logged.
Simple process you can do yourself with the Motive bleeding tool!
Check out our links below:
Insta: https://www.instagram.com/dachsautos/
Facebook: https://www.facebook.com/dachsautos/
Teespring: https://dachs-autos.myteespring.co/
Patreon: https://www.patreon.com/dachsautos/
Motive Bleeder & Ford Cap: https://amzn.to/2S6jkR1 & https://amzn.to/3sUtOPS
#ford #brakes #motive
45
views
1
comment
2005 F-350 Tie Rod End Replacement
Replacing the tie rod end on our 2005 DRW King Ranch. Just shy of 150k miles we're getting some unwanted vibration in the steering wheel (beyond the tires being replaced)
Simply task to do if you hit the nuts with a little PB Blast before hand.
Not many tools needed:
- 13mm socket
- 15mm socket
- 22mm socket
- Pickle Fork
Check out our links below:
Insta: https://www.instagram.com/dachsautos/
Facebook: https://www.facebook.com/dachsautos/
Teespring: https://dachs-autos.myteespring.co/
Patreon: https://www.patreon.com/dachsautos/
#ford #drw #maintenance
4
views
1952 Chevy Styleline: Fuel System Cleanup
Somehow, by a brain-toot, I forgot to replace the short section of fuel line from the pump to the carb a few years back when I replaced the fuel tank, sending unit and primary fuel line.
Today, we tackle that missed task, as well as cleaning the top-end of the fuel pump and the needle of the carb.
Check out our links below:
Insta: https://www.instagram.com/dachsautos/
Facebook: https://www.facebook.com/dachsautos/
Teespring: https://dachs-autos.myteespring.co/
Patreon: https://www.patreon.com/dachsautos/
#chevy #restoration #classic
35
views
2
comments
2005 F-350 Brake Maintenance: Part 2 - Rear Brakes
Today, we're wrapping up the brake job on Truck Norris.
Raybestos Element3 rotors and pads were used with the anti-rust coating to help with the longevity of the rotors and pads.
After the fact, we've ended up replacing all four calipers, as two were stuck (noticed after we started a 4 hour road-trip for Bobcat attachments) so rather than deal with it, we limped home with smoking brakes and chucked the calipers for replacements.
Torque on the wheel lugs and spacer nuts: 150lbs
Torque on the caliper and caliper bracket: 56lbs
Your parts and torque specs may differ, so be sure you're referencing the specific model of your pickup, as I was sent home twice with wrong parts.
Hydraulic Puller: https://www.harborfreight.com/5-ton-three-jaw-hydraulic-gear-puller-95326.html
Check out our links below:
Insta: https://www.instagram.com/dachsautos/
Facebook: https://www.facebook.com/dachsautos/
Teespring: https://dachs-autos.myteespring.co/
Patreon: https://www.patreon.com/dachsautos/
#ford #dually #raybestos
16
views
2005 F-350 Brake Maintenance: Part 1 - Front Brakes
Today, we're performing some routine upkeep on Truck Norris. With 135,000 miles on the clock, it was time for new rotors and pads all-around. I ran into a few issues getting the front rotors off and had to break out the big tools.
Raybestos Element3 rotors and pads were used with the anti-rust coating to help with the longevity of the rotors and pads.
Torque on the wheel lugs and spacer nuts: 150lbs
Torque on the caliper and caliper bracket: 56lbs
Your parts and torque specs may differ, so be sure you're referencing the specific model of your pickup, as I was sent home twice with wrong parts.
Hydraulic Puller: https://www.harborfreight.com/5-ton-three-jaw-hydraulic-gear-puller-95326.html
Check out our links below:
Insta: https://www.instagram.com/dachsautos/
Facebook: https://www.facebook.com/dachsautos/
Teespring: https://dachs-autos.myteespring.co/
Patreon: https://www.patreon.com/dachsautos/
#ford #dually #raybestos
20
views
1952 Chevy Styleline Deluxe Rebuild: Part 14 - PRIME TIME
After what feels like weeks of bodywork on the doors, we get them prepped and primed. While we won't do our final blocking and sealing until we test fit them back the vehicle, they are protected from the elements and about 99.98% complete and should need little to no work.
They'll be packaged up on a pallet for safe keeping until we re-mate them with the car.
Next segments will feature running around the body and prepping for primer.
Also - we finally found our paint!
430-04 - WHITE - 13.7
430-01 - H.S. BLACK - 25.1
430-14 - VIOLET - 25.9
430-13 - NON-FLOP BLUE - 27.5
430-28 - Bright White Pearl - 52.4
435-96 - BINDER - 146.1
Check out our links below:
Insta: https://www.instagram.com/dachsautos/
Facebook: https://www.facebook.com/dachsautos/
Teespring: https://dachs-autos.myteespring.co/
Patreon: https://www.patreon.com/dachsautos/
#chevy #restoration #classic
15
views
1952 Chevy Styleline Deluxe Rebuild: Part 13 - There's a MOUSE in in here!
The enjoyable task of pulling down the headliner is finally upon us. Years of providing refuge to mice comes to an end, and with that, the rank smell of mouse whiz!
Check out our links below:
Insta: https://www.instagram.com/dachsautos/
Facebook: https://www.facebook.com/dachsautos/
Teespring: https://dachs-autos.myteespring.co/
Patreon: https://www.patreon.com/dachsautos/
#chevy #restoration #classic
10
views
1952 Chevy Styleline Deluxe Rebuild: Part 12 - Let's Get Stripped [doors]
We continue stripping down the '52 in this video. We try to save a little time and experiment with some stripper.
Check out our links below:
Insta: https://www.instagram.com/dachsautos/
Facebook: https://www.facebook.com/dachsautos/
Teespring: https://dachs-autos.myteespring.co/
Patreon: https://www.patreon.com/dachsautos/
#chevy #restoration #classic
9
views
1952 Chevy Styleline Deluxe Rebuild: Part 11 - Rusted Nuts!
Today we're removing the front and rear bumpers along with the grill. Also, we start looking at paint options for the old Chevy.
Weigh in your thoughts for the color below!
We find the bumpers are in 3 pieces, which is great, because parts of both the front and rear need repair or replacement.
#classic #chevy #restoration
48
views
3
comments
1972 Dodge Challenger Revival - Will It Run??
An old friend contacted me a few weeks back about an hold Challenger he's had since his Navy days that he's just never had the opportunity to complete. Between life, family, time and space it's been sitting for the better part of 20 years.
Way back, he swapped out the stock engine with a 7.2L 440 mated with a 727 trans. We've got a TON of work ahead of us, and getting it started will be the first challenge.
Rust, dents, panel and even a ROOF replacement are just a few of the exterior things, and tasks like a disk brake conversion, replacement of the wiring etc are all on the list.
Can we get this thing back on the road and running again, or has she been sitting for too many years???
#mopar #challenger #revival
23
views
1
comment
1952 Chevy Styleline Deluxe Rebuild: Part 10 - Left Handed Pliers
We are in search of a left-handed pliers! If you know where one is, please let me know. Also, we're removing more trim and getting a little help from our tiny human!
SUBSCRIBER GIVEAWAY INFO:
To be included for our 250 subscriber giveaway, you'll need to:
Send a screenshot to raffle@dachsautos.com showing the following:
* Subscribed to our YouTube Channel
* Shared this video on Facebook
It's that simple! When we reach 250 subs, anyone who has emailed us with the above information will be included in a drawing to win a $25.00 Amazon gift card! Who doesn't like free money!
Check out our links below:
Insta: https://www.instagram.com/dachsautos/
Teespring: https://dachs-autos.myteespring.co/
Patreon: https://www.patreon.com/dachsautos/
#chevy #restoration #classic
12
views
1
comment
1952 Chevy Styleline Deluxe Rebuild: Part 9 - Door Gaps and Body
We're working to remove some difficult bits of trim, and starting to sand down the body filler we've slapped on the various dents around the vehicle. We're still looking at more paint options, including maybe a 2-tone repaint!
SUBSCRIBER GIVEAWAY INFO:
To be included for our 250 subscriber giveaway, you'll need to:
Send a screenshot to raffle@dachsautos.com showing the following:
* Subscribed to our YouTube Channel
* Shared this video on Facebook
It's that simple! When we reach 250 subs, anyone who has emailed us with the above information will be included in a drawing to win a $25.00 Amazon gift card! Who doesn't like free money!
Check out our links below:
Insta: https://www.instagram.com/dachsautos/
Teespring: https://dachs-autos.myteespring.co/
Patreon: https://www.patreon.com/dachsautos/
#chevy #restoration #classic
13
views
1952 Chevy Styleline Deluxe Rebuild: Part 8 - Door Fitment
In this video, we're fitting the back doors back to the '52, checking gaps and alignment to see if any additional effort is needed. We also start exploring some of the paint options, and the troubles I've had finding the correct original color.
SUBSCRIBER GIVEAWAY INFO:
To be included for our 250 subscriber giveaway, you'll need to:
Send a screenshot to raffle@dachsautos.com showing the following:
* Subscribed to our YouTube Channel
* Shared this video on Facebook
It's that simple! When we reach 250 subs, anyone who has emailed us with the above information will be included in a drawing to win a $25.00 Amazon gift card! Who doesn't like free money!
Check out our links below:
Insta: https://www.instagram.com/dachsautos/
Teespring: https://dachs-autos.myteespring.co/
Patreon: https://www.patreon.com/dachsautos/
#chevy #restoration #barnfind
8
views
1952 Chevy Styleline Deluxe Rebuild: Part 7 - Guide Coat
We're wrapping up the body work on the rear doors on the barn find '52. Lots of effort and sanding are going into this to ensure the doors are clean and straight.
SUBSCRIBER GIVEAWAY INFO:
To be included for our 250 subscriber giveaway, you'll need to:
Send a screenshot to raffle@dachsautos.com showing the following:
* Subscribed to our YouTube Channel
* Shared this video on Facebook
It's that simple! When we reach 250 subs, anyone who has emailed us with the above information will be included in a drawing to win a $25.00 Amazon gift card! Who doesn't like free money!
Check out our links below:
Insta: https://www.instagram.com/dachsautos/
Teespring: https://dachs-autos.myteespring.co/
Patreon: https://www.patreon.com/dachsautos/
#chevy #restoration #classic
9
views
1952 Chevy Styleline Deluxe Rebuild: Part 6 - Hidden Damage!
We begin some spot repairs on various beauty marks on the old Chevy and run into some unexpected body filler from a past accident!
Check out our links below:
Insta: https://www.instagram.com/dachsautos/
Teespring: https://dachs-autos.myteespring.co/
Patreon: https://www.patreon.com/dachsautos/
#chevy #restoration #classic
28
views
1952 Chevy Styleline Deluxe Rebuild: Part 5
We wrap up dismantling the rear passenger door and begin some spot work to remove the dents.
SUBSCRIBER GIVEAWAY INFO:
To be included for our 250 subscriber giveaway, you'll need to:
Send a screenshot to raffle@dachsautos.com showing the following:
* Subscribed to our YouTube Channel
* Shared this video on Facebook
It's that simple! When we reach 250 subs, anyone who has emailed us with the above information will be included in a drawing to win a $25.00 Amazon gift card! Who doesn't like free money!
Check out our links below:
Insta: https://www.instagram.com/dachsautos/
Teespring: https://dachs-autos.myteespring.co/
Patreon: https://www.patreon.com/dachsautos/
#chevy #restoration #classic
14
views
1952 Chevy Styleline Deluxe Rebuild: Part 4 - Door Dent Repair
We continue the bodywork and door dent repair on the 1952 Chevy! We move to the rear passenger door where the dent is far more severe and we take more aggressive means to remove the dents.
SUBSCRIBER GIVEAWAY INFO:
To be included for our 250 subscriber giveaway, you'll need to:
Send a screenshot to raffle@dachsautos.com showing the following:
* Subscribed to our YouTube Channel
* Shared this video on Facebook
It's that simple! When we reach 250 subs, anyone who has emailed us with the above information will be included in a drawing to win a $25.00 Amazon gift card! Who doesn't like free money!
Check out our links below:
Insta: https://www.instagram.com/dachsautos/
Teespring: https://dachs-autos.myteespring.co/
Patreon: https://www.patreon.com/dachsautos/
#chevy #restoration #classic
98
views
1952 Chevy Styleline Deluxe Rebuild: Part 3 - Door Repair
We're continuing the repair on our 1952 Chevy Stylineline. Door dent removal, disassembly and paint prep.
SUBSCRIBER GIVEAWAY INFO:
To be included for our 250 subscriber giveaway, you'll need to:
Send a screenshot to raffle@dachsautos.com showing the following:
* Subscribed to our YouTube Channel
* Shared this video on Facebook
It's that simple! When we reach 250 subs, anyone who has emailed us with the above information will be included in a drawing to win a $25.00 Amazon gift card! Who doesn't like free money!
Check out our links below:
Insta: https://www.instagram.com/dachsautos/
Teespring: https://dachs-autos.myteespring.co/
Patreon: https://www.patreon.com/dachsautos/
#chevy #restoration #classic
35
views
1952 Chevy Styleline Deluxe Rebuild: Part 2 - Door Stripping & Repair
Today, we're digging into the rear drivers' door of the the classic Chevy. It seems as if the previous owner ran thru a door opening that was too narrow, as both doors have nearly the same damage. This door was the lesser of the two, so we start here with attempting to pull the dents and fill in the imperfections in preparation for paint.
SUBSCRIBER GIVEAWAY INFO:
To be included for our 250 subscriber giveaway, you'll need to:
Send a screenshot to raffle@dachsautos.com showing the following:
* Subscribed to our YouTube Channel
* Shared this video on Facebook
It's that simple! When we reach 250 subs, anyone who has emailed us with the above information will be included in a drawing to win a $25.00 Amazon gift card! Who doesn't like free money!
Check out our links below:
Insta: https://www.instagram.com/dachsautos/
Teespring: https://dachs-autos.myteespring.co/
Patreon: https://www.patreon.com/dachsautos/
#chevy #restoration #classic
48
views
1952 Chevy Styleline Deluxe Rebuild: Part 1 - Carb Adjustment and Door Repair
We're kicking off our 1952 Chevy Styleline Deluxe rebuild in this video. While we've already done some work in the past (new fuel system, new exhaust, replaced the floor pans, and some other general mechanicals, we're now digging into the restoration part of the project, starting with cleaning up the exterior. Aside from some adjustment to the Rochester carb, we dig into the dent removal on the rear doors, damaged by a previous owner.
SUBSCRIBER GIVEAWAY INFO:
To be included for our 250 subscriber giveaway, you'll need to:
Send a screenshot to raffle@dachsautos.com showing the following:
* Subscribed to our YouTube Channel
* Shared this video on Facebook
It's that simple! When we reach 250 subs, anyone who has emailed us with the above information will be included in a drawing to win a $25.00 Amazon gift card! Who doesn't like free money!
Check out our links below:
Insta: https://www.instagram.com/dachsautos/
Teespring: https://dachs-autos.myteespring.co/
Patreon: https://www.patreon.com/dachsautos/
#chevy #restoration #classic
70
views
Tips & Lessons Learned - Part 11: Erecting our Great Western 50x80 Building
We wrap up our shop series with a review of our experience, and some tips and lessons learned that you might find useful. If you're planning to build your own shed, shop, barn, etc., I highly recommend you check out the offerings from Great Western. Not only was the team fantastic to work with, they deliver a top-notch product!
SUBSCRIBER GIVEAWAY INFO:
To be included for our 250 subscriber giveaway, you'll need to:
Send a screenshot to raffle@dachsautos.com showing the following:
* Subscribed to our YouTube Channel
* Shared this video on Facebook
It's that simple! When we reach 250 subs, anyone who has emailed us with the above information will be included in a drawing to win a $25.00 Amazon gift card! Who doesn't like free money!
Base Trim: https://www.youtube.com/watch?v=Ngj7c-neUUw
Corner Trim @ RR Buildings: https://www.youtube.com/watch?v=o0UZBMbx7A8
Cover Trim Corner Bends: https://www.youtube.com/watch?v=O1kdllKPHM0
Great Western Buildings: https://greatwesternbuildings.com/
AFT Fasteners: https://www.aftfasteners.com/
Check out our links below:
Insta: https://www.instagram.com/dachsautos/
Teespring: https://dachs-autos.myteespring.co/
Patreon: https://www.patreon.com/dachsautos/
#steel #building #erection #greatwesternbuildings #greatwesternsteel #construction #barn #polebuilding #shop
98
views
Tools used in our Great Western Building Project
Here's s synopsis of the key tools we used for our project. Most of these are common tools you already have, or likely have access to.
Milwaukee M12 Rivet Gun: https://amzn.to/3oVxWxR
Johnson Level Kit: https://amzn.to/3afa0RZ
Air Nibbler: https://amzn.to/3gBxge1
Check out our links below:
Insta: https://www.instagram.com/dachsautos/
Teespring: https://dachs-autos.myteespring.co/
Patreon: https://www.patreon.com/dachsautos/
#steel #building #erection #greatwesternbuildings #greatwesternsteel #construction #barn #polebuilding #shop
26
views
Steel Building Erection: Part 9 - We're DONE!
We finally wrap up and recap our experience here putting up our new shop. It was a truly great experience to learn, and I cannot thank the team at GWBS for putting together both a quality product, and an excellent support team. I seriously suggest you give them a look if you're planning a new building. Having originally been certain on a wood frame construction, the opportunities steel provided were hands down a no brainer for us! -- Tell them "that YouTube guy from Minnesota sent me"!
Stick around as we'll have more new car-related content coming soon!
Check out our links below:
Insta: https://www.instagram.com/dachsautos/
Teespring: https://dachs-autos.myteespring.co/
Patreon: https://www.patreon.com/dachsautos/
Great Western Buildings: https://greatwesternbuildings.com/
#steel #building #erection #greatwesternbuildings #greatwesternsteel #construction #barn #polebuilding #shop
38
views