Prodigy vs Rival S vs Platypus - TOP SHOOTER
In this video I take my 3 best shooting guns to the range to see which of the 3 is the TOP SHOOTER. I use a 6 bullseye target horizontally and shoot 2 targets with each gun. I have 2 magazines per gun with 10 rounds in them. I show in the range shooting comparison and on target shooting comparison. I evaluate the weight, feel, grip, trigger, accuracy, and overall performance of each gun. I close out with my final assessment and announce the TOP SHOOTER.
#MegaGuns #ThinkMegaTV #ThinkGreaterThan #BeResponsible
LIKE COMMENT SHARE SUBSCRIBE
00:00 Intro
00:16 Opening (POOR AUDIO)
02:25 Rival S shooting (AUDIO FIXED)
03:07 Prodigy shooting
03:47 Platypus shooting
05:06 Rival S mag 2
05:36 Prodigy mag 2
06:00 Platypus mag 2
06:29 Warm up review
06:43 Target view
07:23 Rival S
07:43 Prodigy
08:10 Platypus
08:36 Target view
09:11 Midway review
09:24 Rival S low target
09:44 Prodigy low target
10:07 Platypus low target
10:32 Target view
11:14 Rival S 20 rounds (FINALE)
11:49 Prodigy 20 rounds (FINALE)
12:28 Platypus 20 rounds (FINALE)
13:03 Target view (top & bottom)
13:56 Assessment
14:32 Gun Weights
15:23 Overall Shooting Experience
18:31 TOP SHOOTER IS.......
18:51 Optic comparison
19:24 Stealth Arms Platypus appreciation
20:10 Outro
18
views
2
comments
Strike Industries Mass Driver Compensator Review
The video features Mega at a The Marksman shooting range testing out a PSA Dagger with a Timney Alpha Glock trigger and a Strike Industries Mass Driver compensator. I initially intended to test the gun both with and without the compensator but forgot the tool to remove it. The gun shoots accurate, showing off the shooting skills on the target. The video concludes with Mega mentioning the components used in the test and signing off.
#MegaGuns #ThinkMegaTV #ThinkGreaterThan #BeResponsible
LIKE COMMENT SHARE SUBSCRIBE
13
views
SAR B6: Step-by-step Full Reassembly
The video demonstrates the step-by-step process of reassembling a SAR B6 firearm. I start by reassembling the front housing, magazine catch, trigger, hammer, rear housing, safety, sear, slide, extractor, and other internal parts of the firearm. Detailed instructions on how to correctly assemble each part, emphasizing the challenges faced during reassembly. The video concludes with a function check to ensure that the firearm is reassembled correctly. Overall, the video provides a comprehensive guide on how to fully reassemble a SAR B6 firearm, highlighting the complexity of the process.
#MegaGuns #ThinkMegaTV #ThinkGreaterThan #BeResponsible
LIKE COMMENT SHARE SUBSCRIBE
00:00 Intro
00:15 Opening
00:27 Front Housing
01:03 Magazine Catch
01:28 Trigger Guide
02:31 Trigger and Bar
03:18 Trigger Return Spring
08:03 Trigger Return Spring Explained
09:22 Rear Housing
09:44 Decocker to Hammer
11:08 Hammer Strut to Hammer
12:35 Rear Housing Assembly
13:44 Rear Housing to Frame
14:24 Ejector Housing and Sear Assembly
14:45 Sear Spring (most difficult)
15:15 Sear Spring Explained
16:18 Safety Assembly
16:57 Ejector Housing with Sear Install
17:13 Safety Install
18:05 Safety Function Check
18:42 Slide Assembly
18:54 Firing Pin Assembly
19:12 Firing Pin Block
19:27 Firing Pin Install
19:57 Firing Pin Stop
20:07 Extractor
21:48 Reassemble Firearm
22:51 Function Check
23:42 Closing
17
views
1
comment
How To Fully Disassemble The SAR B6 - Step By Step Guide
The video shows a detailed step-by-step disassembly of a SAR B6 firearm. Using various tools such as pin punches, a hammer screwdriver, pliers, and tweezers to fully disassemble the firearm. The disassembly process includes removing components like the extractor, firing pin, safety, sear housing, rear housing, hammer, trigger, trigger bar, magazine catch, and front housing. Each step is carefully demonstrated and explained to show how to take apart the firearm completely.
#MegaGuns #ThinkMegaTV #ThinkGreaterThan #BeResponsible
LIKE COMMENT SHARE SUBSCRIBE
31
views
FTH 223 week 3 Function Checks, Sub-Assemblies and Detailed Strip
For this week's assignment, using the SAR B6, we had to perform a dry function check and dummy round function check and also perform a field strip, sub-assembly function check and a detailed strip of the firearm. I do not show the full disassembly and reassembly in this video due to time requirements for the assignment but I will be uploading the full disassembly and reassembly videos soon.
#MegaGuns #ThinkMegaTV #ThinkGreaterThan #BeResponsible
LIKE COMMENT SHARE SUBSCRIBE
23
views
FTH 223 week 2 Unfamiliar Firearms
For this week's assignment we are asked to pick a firearm that we are not familiar with to show how we would find issues on firearms we have not worked on before. I also give information on what we learned about the firearm chosen to work with.
My #SDI Experience #ThinkMegaTV
LIKE COMMENT SHARE SUBSCRIBE
29
views
Does a PORTED Barrel REDUCE Recoil
In this episode I am still testing different recoil spring weights in The Porter and I also have a close-up side view of the gun to really show the recoil.
#MegaGuns #ThinkMegaTV #ThinkGreaterThan #BeResponsible
LIKE COMMENT SHARE SUBSCRIBE
14
views
FTH 223 week 1 Hammer Fired Pistols
For the first week's assignment we were asked to go to a few different firearm websites to search for schematics diagrams and certain parts for the Sig Sauer p226. This would be the procedure for finding parts to repair a customer's firearm.
#ThinkMegaTV
My #SDI Experience
26
views
4
comments
The Porter.....will it RUN???
This is the initial testing phase of a build I call The #Porter. The Porter is built on the Glock 19 platform with a Glock 17 length slide. The slide is ported and so is the barrel, why it is named The Porter. Every piece of the gun is custom and getting it to run safely in this configuration is a task, but thats what gunsmithing is for. This is one of my longer videos but I show the first shot, every malfunction I faced and the end we see. Will it Run?
#MegaGuns #ThinkMegaTV #ThinkGreaterThan #BeResponsible
LIKE COMMENT SHARE SUBSCRIBE
Chapters:
00:00 Intro
00:15 The Porter Introduction
02:23 Range Day 1 FTE
08:30 Range Day 2
12:03 Range Day 3 Binary Shooting
17:19 Range Day 4 Final Phase
20:08 Last 2 mags, 40 Shots
21:00 Overall Assessment
21:47 Outro
13
views
FTH 212 week 5 Final Course Assessment
In this episode I give my assessment of the overall striker-fired class of Sonoran Desert Institute's Handgun Specialist program. I go over some areas that may require attention using the PSA Dagger for demonstration.
My #SDI Experience
LIKE COMMENT SHARE SUBSCRIBE
13
views
SAR B6 Unboxing Field Strip and First Shots
This is the third firearm sent for the SDI Handgun Specialist program. The first class was on revolvers and we were sent the Taurus 856 and for the striker-fired class we were sent a PSA Dagger kit. The third and final gun sent for the hammer-fired class is the SAR B6 which is a Turkish clone of the CZ-75. In this video I show the unboxing, I field strip the firearm and I also take it to the range for its first shots.
#MegaGuns #ThinkMegaTV #ThinkGreaterThan #BeResponsible
LIKE COMMENT SHARE SUBSCRIBE
13
views
FTH 212 week 4 Frame Modification
Week 4 was all about frame modification. For this week's assignment we had practice stipple sheets to draw a pattern on, create a border, sand and stipple. After working on the practice sheets, we had to stipple a pattern on the PSA Dagger that was sent to us or any frame that can be worked on. It took me awhile to get the hang of recessed borders and I still have more to put more time in to get better. After some practice with the borders, I gained the confidence to stipple my Dagger frame. I close out by speaking on the processes to get through the assignment.
My #SDI Experience
#ThinkMegaTV
LIKE COMMENT SHARE SUBSCRIBE
18
views
Guns I Carry
In this episode I give in depth info on the different guns I have carried by showing the dimensions, the weight and what made them the guns I chose to carry and why I stopped carrying them. I plan to share more info about firearms from my personal experiences and from a gunsmith's perspective.
#MegaGuns #ThinkMegaTV #ThinkGreaterThan #BeResponsible
LIKE COMMENT SHARE SUBSCRIBE
00:00 Intro
00:15 Opening
00:27 Sig p320 M18
01:23 p320 dimensions
02:08 Why I stopped carrying p320
04:22 Sig p365
06:36 p365 dimensions
07:46 Why I stopped carrying p365
09:54 Canik TP9 Elite SC
11:21 TP9 dimensions
11:51 Canik stock trigger
12:28 p320 M18 reliability
12:54 Why I stopped carrying TP9
13:16 Sig p365 X Macro Comp
15:31 Macro dimensions
16:55 p320 carry weight
17:39 p365 carry weight
17:56 TP9 carry weight
18:15 Macro carry weight
18:45 Closing
21:04 Outro
46
views
FTH 212 week 3 Sub-Assemblies and Headspace Check
For this week's assignment we had to perform a field strip of the PSA Dagger and with the firearm field stripped, point out the sub-assemblies and explain some of their interactions and functionality. We also had to articulate are readiness to work on the striker-fired platform. Then we were to perform a headspace check using the 9mm Go, No-Go gauges. This is the second class of Sonoran Desert Institute's Handgun Specialist program.
My #SDI Experience
LIKE COMMENT SUBSCRIBE SHARE
12
views
Bro-time Toy Fun
In this video my VA Day 1 brotha was in town and this is his first time seeing the Prodigy, Rival S, Platypus, and Macro. I also shot the PSA Dagger build for the first time and had a recurring issue with the AMEND 2 aftermarket Glock magazines. These are all guns he has been looking forward to getting his hands on and its great when your family can enjoy your toys. SHARING IS CARING.
#MegaGuns #ThinkMegaTV #ThinkGreaterThan #BeResponsible
LIKE COMMENT SUBSCRIBE SHARE
30
views
FTH 212 week 2 PSA Dagger Experience
In this week's assignment we go over the experience of assembling the PSA Dagger. I also demonstrate how to measure the barrel length of the Dagger. In closing I articulate the difference of measuring the barrel twist of a barrel that is not long enough to complete a full rotation.
MY #SDI #EXPERIENCE
#MegaGuns #ThinkMegaTV #ThinkGreaterThan #BeResponsible
LIKE COMMENT SUBSCRIBE SHARE
10
views
PSA Dagger Assembly Walkthrough - Step By Step Tutorial
In the second week of the Striker-Fired pistol class the assignment is to complete a full assembly of Palmetto State Armory Dagger. This kit was sent with everything needing to be assembled, even things I have never done like putting the spring on the slide stop, the spring on the recoil assembly, and even the thin piece of metal in the backplate. This entire gun and every part needed to be assembled, and it was a fun experience. I have built a couple P80s and this Dagger was different.
#MegaGuns #ThinkMegaTV #ThinkGreaterThan #BeResponsible
LIKE COMMENT SHARE SUBSCRIBE
19
views
Unboxing The Sdi Handgun Specialist Striker-Fired Class - What's Inside?!
The second class of Sonoran Desert Institute's Handgun Specialist program is about the striker-fired handgun platform. For this class we received a PSA Dagger kit that has to be assembled in week 2, we also received a rotary tool and a Weller 25 watt wood burning kit. Along with the Dagger build we will also be learning how to stipple which I look forward to learning.
#MegaGuns #ThinkMegaTV #ThinkGreaterThan #BeResponsible
LIKE COMMENT SHARE SUBSCRIBE
26
views
FTH 212 Striker-Fired Pistols week 1
This is the first week of @SdiEdu Sonoran Desert Institute's Striker-Fired Pistol platform of the new Handgun Specialist program. In this week's assignment we introduce a striker-fired pistol to go over what tools are needed for disassembly and what tools are used for measurements of the firearm.
#MY #SDI #EXPERIENCE
#ThinkMegaTV
20
views
FTH 202 week 4 assignment
This week's assignment was about tuning the trigger of the Taurus 856 revolver. We started with a trigger pull with a gauge to get an average trigger pull weight. Then we had to disassemble the firearm, use Dykem layout fluid to mark the action parts of the firearm, reassemble the firearm, work the action to find the high points, then polish and sand them. Then I had to reassemble the firearm gauge the trigger pull again, then changed the hammer and trigger springs and did one final trigger gauge. This assignment ended with me demonstrating how to use the go no-go gauges to measure the cylinder gap of the firearm.
#MegaGuns #ThinkMegaTV
6
views
HOW TO make any Glock or P80 TRIGGER run SMOOTH
In this video, I show how to make a Glock or Polymer 80 trigger run smoother. I pull out the Dremel, Mother's polish and Flitz polish to give the trigger bar and connector a mirror shine. I am performing this task on a Gen 5 Glock 19.
#megaguns #thinkmegatv #thinkgreaterthan #beresponsible
38
views
Glock Sight Swap
In this video I pull out the good ol' VISM sight pushing tool to finally change the sights on this well finished Gen 5 Glock 19, the most popular handgun in the world. I love everything about the look of this gun other than the sights, so I got some @TrijiconInc night sights. I may do a trigger swap some day but for now these sights will do.
#Glock #Trijicon #pewpew
#MegaGuns #ThinkMegaTV #ThinkGreaterThan #BeResponsible
24
views
SDI Handgun Specialist FTH 202 Module 3
In this week's assignment we had to point out and describe some internal parts of the revolver and which cycles of operation would be affected by a malfunction. We also had to measure the barrel twist of the Taurus 856 snub nose revolver.
5
views
FIRST SHOTS....Taurus 856...is this NORMAL???
I have shown the unboxing of the Taurus 856, I have done school assignments with the 856, I have fully disassembled and reassembled the 856. I have done everything but shoot the 856. In this video I take it to the range and go through 4 cylinders of Aguila 125 grain .38 Special +P jacketed hollow point bullets. I would prefer to have training ammo that is not +P due to the cost but this was all I could get. I did not expect shooting a snub nose revolver would be so fun.
#MegaGuns #ThinkMegaTV #ThinkGreaterThan #BeResponsible
LIKE COMMENT SUBSCRIBE SHARE
18
views
p365 X Macro Comp...the MOST fitting EDC?
Its weird that the gun I carry the most is probably the gun I shoot the least. That is because I am usually using one of my "fancier" or more expensive guns. Even though I do not shoot this gun as often, my first shot shows that the muscle memory is there. My favorite guns may not be my carry gun but I can tell you, this Sig Sauer p365 X Macro is by far my favorite EDC in the 4 years I have been carrying. Let me know your favorite carry gun in the comments.
#MegaGuns #ThinkMegaTV #ThinkGreaterThan #BeResponsible
COMMENT LIKE SUBSCRIBE SHARE
13
views