The Kitchen Knife That Started As A Bowie..... Don't Be Afraid To Pivot 😅
In the legendary words of Rocky Balboa.... "Life ain't all sunshine and rainbows..." This knife was supposed to be a bowie, but mistakes were made! A lot of times knife making is about overcoming obstacles and adapting on the fly... This project was a good example of that!
Major thanks to Jeremy @Simple Little Life for outlining this WA handle process!
⭐ Become a RBO Patron - https://www.patreon.com/RedBeardOps
⭐ RBO Recommended Mill - https://littlemachineshop.com/3990?Source=RedBeard
🛠 Notable Items:
Butcher Block Brush - https://amzn.to/3BAWUsh
Face Mill - https://amzn.to/3uSqeII
2mm end mills - https://amzn.to/3oLHE98
1/2 roughing end mill - https://amzn.to/3DpzFTe
Ferric Chloride 1 Quart - https://amzn.to/2YvYYDQ
Resp-O-Rator - https://amzn.to/2M6PMN7
2'' Kant Clamp - https://amzn.to/3FF45Tx
Baking Pan - https://amzn.to/3uTlqD3
⭐ DIY Builds:
Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY
DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw
📷 Camera Gear:
Camera – Panasonic G7 – https://amzn.to/2SD8ekG
Microphone – Takstar - https://amzn.to/36euYLP
SD Card – 128GB - https://amzn.to/2tmVfZW
Narration Microphone (New 2021) - https://amzn.to/32741t6
Tripod - https://amzn.to/2XmXrwB
Magic Arm Mount - https://amzn.to/3a0iP1K
**************************************************
Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1
**************************************************
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
#knifemaking
#redbeardops
#kitchenknife
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
65
views
1
comment
Homemade Hydraulic Forging Press | SMASH
Hope yall like my homemade hydraulic forging press! I originally made this H-frame hydraulic press based off of Ron "Bowie" Claiborne's design back in 2006. This is a mix between a rebuild and a restoration; so I hope yall like it!
It should be noted that these plans are for educational purposes only... They have not been evaluated by a structural engineer. Use these plans and build a press at your own risk.
⭐ Free Plans / 3D Files / Calculator - https://www.patreon.com/posts/55107545
🔸Hydraulic Components (In approximate flow order):
12 Gal Tank - https://www.northerntool.com/shop/tools/product_200665139_200665139
Suction Strainer - https://www.northerntool.com/shop/tools/product_200675168_200675168
1-1/4'' x 3/4'' Reducer - https://amzn.to/2VKaRoV
Hose Barb Fittings - https://www.hydraulicsdirect.com/Steel-Hose-Barb-to-JIC-Swivel-Fitting-p/4445.htm
Suction Hose (3/4'') - https://amzn.to/3sfkIPl
Suction Hose (1'') - https://amzn.to/3g2HBR8
Hydraulic Pump - https://www.northerntool.com/shop/tools/product_200321051_200321051
Hydraulic Pump Alternative w/ 1'' inlet - https://amzn.to/3xJFMyj
1/2'' x 1/2'' swivel 45 - https://amzn.to/37FOF1i
1/2'' x 24'' Hose - https://amzn.to/3yXrA6x
3/4'' x 1/2'' swivel 90 - https://www.northerntool.com/shop/tools/product_200578692_200578692
3/4'' Tee - https://amzn.to/3sg4ju0
3/4'' x 1/4'' Reducer - https://amzn.to/3AKDzEZ
5000 psi Gauge - https://amzn.to/3iEhLV7
Control Valve - https://amzn.to/3AzChfI
(qty. 4) 1/2'' x 1/2'' Swivel 90 - https://amzn.to/3yL73BY
1/2'' x 24'' Hose - https://amzn.to/3yXrA6x
1/2'' x 36'' Hose - https://amzn.to/3lYgevh
5x8 ASAE Cylinder - https://www.northerntool.com/shop/tools/product_200737765_200737765
45 degree 3/4'' swivel - https://amzn.to/2VRoDpC
3/4'' x 4'' nipple - https://amzn.to/3AFIE17
1-1/4'' x 3/4'' Reducer - https://amzn.to/2VKaRoV
Filter Assembly - https://www.northerntool.com/shop/tools/product_200675166_200675166
1-1/4'' x 3/4'' Reducer - https://amzn.to/2VKaRoV
3/4'' x 3/4'' 90 Swivel - https://amzn.to/2VRqjPW
3/4'' x 36'' Hose - https://amzn.to/37EAiKL
3/4'' x 3/4'' 90 Swivel - https://amzn.to/2VRqjPW
1'' x 3/4'' Reducer - https://amzn.to/3g2xls5
🔸Other Components:
Slag Catchers - https://amzn.to/2VRgDVb
LoveJoy Coupler (1/2x5/8) - https://amzn.to/37DSLHh
5HP Motor I'd Consider - https://amzn.to/3CKV1uJ
220 30A Switch - https://amzn.to/3iGOWHx
Hydraulic Fluid - https://www.tractorsupply.com/tsc/product/vp-racing-lubricants-ultra-j20a-plus-utility-tractor-fluid-5-gal-vp2040114?cm_vc=-10011
Thread Sealant - https://amzn.to/3yRu2ez
🛠 Notable Tools:
Socket Tap Holder - https://amzn.to/3skjQbT
1/4'' Drill Tap - https://amzn.to/2XsEQlE
Evolution Cold Cut Saw - https://amzn.to/3hP0NSm
Fireball Tool Squares - https://fireballtool.com/minion-package/
Klutch Welding Table - https://amzn.to/2T25RKY
1-1/4'' Carbide Hole Saw - https://amzn.to/3jXYQUz
48mm Hole Saw (Pump Bracket) - https://amzn.to/3jTWIgD
⭐ How To Videos:
DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw
How to Stonewash - https://youtu.be/m6oKy2UDeLI
Leather Sheath Tutorial - https://youtu.be/MhVWVc_rdKA
🗡 Knife Builds:
War Knife - https://youtu.be/LgT424a8_2M
Bird and Trout Knife - https://youtu.be/usDL_AI1ZqQ
Hand Forged Damascus Knife - https://youtu.be/CbOj-k7M1us
Wharncliffe Knife - https://youtu.be/HAE9V5wu5qA
Hidden Tang Fighter - https://youtu.be/3Dv3fj99vyM
**************************************************
Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1
**************************************************
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
#knifemaking
#redbeardops
#hydraulicpress
00:00 – Intro & Plan
00:45 – New Press Feet
02:57 – Disassembly
04:55 – Frame Mod & Adding Feet
06:46 – Motor & Pump Shelf
07:27 – New Pump Bracket
10:12 – Enlarging Pin Holes
13:57 – Traveling Guide Mod
14:38 – Die Holders & Dies
18:29 – Slag Catcher
19:21 – Wiring Switch
21:28 – Hydraulic Assembly
28:03 – Start Up & Traveling Block Connect
29:32 – Testing, Front Die Tabs, & Outro
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
166
views
4
comments
Which 20V Replacement DeWalt Battery is the BEST? | Knockoffs VS DeWalt Comparison
Looking for some replacement batteries for your 20V DeWalt tools but you don't want to shell out an arm and a leg? Well then this video is for you...
This video format and style is highly motivated by watching the @Project Farm channel. The man is a ledged; full stop. Please make sure to stop by his page and give him your subscription!
🔋 Batteries Tested:
Waitley - https://amzn.to/3eRUHjA
Dewalt - https://amzn.to/3BKtl8S
PowerExtra - https://amzn.to/2TvB5Ku
TopBatt - https://amzn.to/37bOAm1
PowTree - https://amzn.to/36UfKNN
🛠 Mentioned & Notable Items:
Air Speed Tester - https://amzn.to/3y1iIfx
Bulk Cut Off Discs - https://amzn.to/2V5bp7W
⭐ How To Videos:
DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw
How to Stonewash a Knife - https://youtu.be/m6oKy2UDeLI
Leather Sheath Tutorial - https://youtu.be/MhVWVc_rdKA
🗡 Knife Builds:
War Knife - https://youtu.be/LgT424a8_2M
Bird and Trout Knife - https://youtu.be/usDL_AI1ZqQ
Hand Forged Damascus Knife - https://youtu.be/CbOj-k7M1us
Wharncliffe Knife - https://youtu.be/HAE9V5wu5qA
Hidden Tang Fighter - https://youtu.be/3Dv3fj99vyM
🔸 Red Beard Ops Patreon - https://www.patreon.com/RedBeardOps
📷 Camera Gear:
Camera – Panasonic G7 – https://amzn.to/2SD8ekG
Microphone – Takstar - https://amzn.to/36euYLP
SD Card – 128GB - https://amzn.to/2tmVfZW
Narration Microphone (New 2021) - https://amzn.to/32741t6
Tripod - https://amzn.to/2XmXrwB
Magic Arm Mount - https://amzn.to/3a0iP1K
**************************************************
Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1
**************************************************
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
#DewaltBatteries
#redbeardops
#ToolReview
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
7
views
Evolution Chop Saw Review | Metal Cutting | Cold Cut
Yep... this thing is awesome.... I really should have bought one of these years ago! Please make sure to let me know what yall think about this cold cutting chop saw in the comments! Cheers yall!
⭐ Evolution Cold Cut Chop Saw (R355CPS) - https://amzn.to/3hP0NSm
🔸 Red Beard Ops Patreon - https://www.patreon.com/RedBeardOps
📹 How To Videos:
DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw
How to Stonewash - https://youtu.be/m6oKy2UDeLI
Leather Sheath Tutorial - https://youtu.be/MhVWVc_rdKA
🗡 Knife Builds:
War Knife - https://youtu.be/LgT424a8_2M
Bird and Trout Knife - https://youtu.be/usDL_AI1ZqQ
Hand Forged Damascus Knife - https://youtu.be/CbOj-k7M1us
Wharncliffe Knife - https://youtu.be/HAE9V5wu5qA
Hidden Tang Fighter - https://youtu.be/3Dv3fj99vyM
📷 Camera Gear:
Camera – Panasonic G7 – https://amzn.to/2SD8ekG
Microphone – Takstar - https://amzn.to/36euYLP
SD Card – 128GB - https://amzn.to/2tmVfZW
Narration Microphone (New 2021) - https://amzn.to/32741t6
Tripod - https://amzn.to/2XmXrwB
Magic Arm Mount - https://amzn.to/3a0iP1K
**************************************************
Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1
**************************************************
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
#metalsaw
#redbeardops
#chopsaw
00:00 - Intro
00:29 - Abrasive Saw Drawbacks
01:24 - Evolution Details & Features
04:01 - Cut Testing
06:32 - Final Thoughts
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
12
views
1
comment
Heat Treating Oven Build | FULL GUIDE | DIY Heat Treatment Oven
This is a comprehensive tutorial on how to build a heat treatment oven. Heat treating ovens are extremely handy for knifes makers since they allow precise, accurate temperature control, which is required for some steels and for repeatability. The heat treating ovens on the market can be expensive, so the goal of this video is to provide you with a full guide on how to build one for yourself!
⭐ Wiring Diagram Download - https://www.patreon.com/posts/50559429
🔸 Red Beard Ops Patreon - https://www.patreon.com/RedBeardOps
⭐Parts List (In order seen in video):
Kanthal A1 Wire (16AWG) - https://kilnparts.com/products/wire16_1?variant=31793883119750
Fire Bricks - https://amzn.to/3aLEhap
Cement / Mortar - https://amzn.to/32VLT5P
Rubber Feet - https://amzn.to/2R6TkEn
Aluminum Flashing (14''x10') - https://amzn.to/3np8EbE
Ceramic Wool - https://amzn.to/2RZDlZi
1/8'' Rivets - https://amzn.to/3vlgVQE
Bullet Hinge - https://amzn.to/3sYPsmh
Limit Switch - https://amzn.to/3t0NpOy
Ceramic Terminal Blocks - https://amzn.to/3sXa8eu
10 AWG Insulated Wire - https://kilnparts.com/products/1000336?variant=31791055175814
Thermocouple (Not Exact One Used) - https://amzn.to/3aJzlCO
Thermocouple Wire - https://kilnparts.com/products/1250004?variant=31793884299398
Cable Gland - https://amzn.to/3dW3ocn
SSR-40DA - https://amzn.to/2QDH52r
Thermal Paste - https://amzn.to/3nC57Hj
Switches (DPST) - https://amzn.to/3xtsUO1
Fuse Holder - https://amzn.to/3eyWCZo
20 Amp Fuses - https://amzn.to/3u3gsm8
Auber PID Controller - https://amzn.to/2QyY3ig
Project Box - https://amzn.to/3npfMVz
Bulk 10/3 Power Cable (Maybe Cheaper Locally) - https://amzn.to/3eFahy9
Plug 6-20 - https://amzn.to/3xvpmuw
12 AWG Insulated Wire - https://kilnparts.com/products/fw12ga?variant=31793884135558
Terminal Blocks - https://amzn.to/3tWwo9H
Female Wire Crimp Terminals - https://amzn.to/3sQJHqM
Heat Shield (Aluminum) - https://amzn.to/3e0XxTr
🛠 Tools:
Multimeter - https://amzn.to/2QEDj8R
Router Bit - https://amzn.to/3tZKIy1
T-Slot Bit - https://amzn.to/3dVVZdl
Round Nose Bit - https://amzn.to/2R3zAl0
Snips - https://amzn.to/3u2nmrC
Rivet Gun - https://amzn.to/3aITcCc
Wire Stripper / Crimper - https://amzn.to/3xDUvw6
🔸 References:
Blade Forums (DIY HT Oven Legacy Build) - https://www.bladeforums.com/threads/diy-heat-treat-oven-build.1576402/
Blade Forums (TC Trouble Shooting) - https://www.bladeforums.com/threads/heat-treat-oven-issue-low-max-temp-auber-2352p.1786367/
Blade Forums (New Oven User) - https://www.bladeforums.com/threads/heat-treating-oven-newbie-questions-learn-me-up.1786933/
DC Knives Build - http://dcknives.blogspot.com/p/electric-forge.html
🗡 Knife Builds:
War Knife - https://youtu.be/LgT424a8_2M
Bird and Trout Knife - https://youtu.be/usDL_AI1ZqQ
Hand Forged Damascus Knife - https://youtu.be/CbOj-k7M1us
Wharncliffe Knife - https://youtu.be/HAE9V5wu5qA
Hidden Tang Fighter - https://youtu.be/3Dv3fj99vyM
📷 Camera Gear:
Camera – Panasonic G7 – https://amzn.to/2SD8ekG
Microphone – Takstar - https://amzn.to/36euYLP
SD Card – 128GB - https://amzn.to/2tmVfZW
Narration Microphone (New 2021) - https://amzn.to/32741t6
Tripod - https://amzn.to/2XmXrwB
Magic Arm Mount - https://amzn.to/3a0iP1K
**************************************************
Subscribe YT Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1
**************************************************
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
00:00 - Intro
04:48 - Making Coils & Math
06:38 - Brick Work
14:01 - Frame & Door Fabrication
23:05 - Oven Assembly
24:41 - Wiring - PID Control Box
37:00 - Mods & Knife Rack
38:19 - Start Up - Testing - Thoughts
#redbeardops
#knifemaker
#heattreating
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
191
views
2
comments
Moving a 1/2 TON GUN SAFE Without Dying...
This is how I moved my 1,100 pound safe from my house and into a 26 foot moving truck. I'm sharing this in order to give yall some ideas when moving heavy stuff! I'll put links to the items I used below:
🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps
🔸 Previous Shop Moving Video - https://youtu.be/sJwi7ADuFxM
🛠 Notable Items and Supplies:
1800 Pound 4'' Casters - https://amzn.to/3onKhxe
Hydraulic Furniture Movers - https://www.northerntool.com/shop/tools/product_200673748_200673748
Apollo Manual Forklift - https://amzn.to/3Inbzfa
⭐ How To Videos:
Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY
DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw
🗡 Knife Builds:
Crypto Knife - https://youtu.be/_Ph_LYE6Gcc
Raindrop Kitchen Knife - https://youtu.be/qwGdKEtOhrk
Battle Blade - https://youtu.be/LgT424a8_2M
📷 Camera Gear:
Camera – Panasonic G7 – https://amzn.to/2SD8ekG
Microphone – Takstar - https://amzn.to/36euYLP
SD Card – 128GB - https://amzn.to/2tmVfZW
Narration Microphone (New 2021) - https://amzn.to/32741t6
Tripod - https://amzn.to/2XmXrwB
Magic Arm Mount - https://amzn.to/3a0iP1K
**************************************************
Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1
**************************************************
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
#redbeardops
#moving
#safemove
00:00 - Intro
00:41 - Beefy Dolly Build
04:04 - Yuge Safe Move
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
109
views
1
comment
Forging a Damascus BOWIE || Knife Making
Well yall this is the 3rd hidden tang knife I've made on the channel! I still have SO MUCH to learn, but I think I'm making progress. Let me know what yall think and don't forget to vote on some of the awesome knives made in this bowie challenge!
Become a RBO Patron - https://www.patreon.com/RedBeardOps
🛠 Notable Items:
Resp-O-Rator - https://amzn.to/2M6PMN7
1 / 16'' Radius End Mill - https://amzn.to/38UNRGD
Mini-Mill I Recommend (LMS) - https://littlemachineshop.com/3990?Source=RedBeard
Cheap Height Gauge - https://amzn.to/3E33olX
1/16th Hardened Dowell Pins - https://www.mscdirect.com/product/details/06020101?rd=k&tg=Recommendations&tpp=false&searchAhead=true&searchAheadTerm=06020101&typahddsp=06020101&hdrsrh=true
House / Work Sharpening System - https://housemade.us/collections/accessories/products/2x72-sharpening-system
McMaster Counter Bore (3102A11) - https://www.mcmaster.com/catalog/126/2608
5/32'' & 3/16'' (3103A12 & 3103A13) Pilots - https://www.mcmaster.com/counterbore-pilots
⭐ DIY Builds:
Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY
DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw
📷 Camera Gear:
Camera – Panasonic G7 – https://amzn.to/2SD8ekG
Microphone – Takstar - https://amzn.to/36euYLP
SD Card – 128GB - https://amzn.to/2tmVfZW
Narration Microphone (New 2021) - https://amzn.to/32741t6
Tripod - https://amzn.to/2XmXrwB
Magic Arm Mount - https://amzn.to/3a0iP1K
**************************************************
Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1
**************************************************
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
#redbeardops
#knifemaking
#bowiechallenge
00:00 - First Damascus Stack
01:45 - Making Kiss Block Dies
02:58 - Finishing Damascus & Forging
05:50 - Profiling The Blade
08:32 - Heat Treating
10:27 - Finish Grinding
12:49 - Waterfall Platen & Plunges
16:00 - Guard Fitting
19:28 - Thread Keyhole-ing
20:26 - Handle Construction
24:44 - Guard Vise Build
26:00 - Handle Sculpting
26:54 - DIY Guard Jack
27:48 - Etching Damascus & Assembly
30:33 - Final Thoughts
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
49
views
1
comment
The Most VALUABLE Knife Ever Made? | Secret Bitcoin Wallet | Knife Making
Keep your bitcoin safe by hiding your ledger hardware wallet in the handle of this knife! This custom hand made knife can really... handle... the self custody of your private keys!
The auction for this knife has ended. Make sure to follow me on Instagram or YouTube in case I ever make a run of these to sell. Cheers yall!
RBO Patreon (plans for patrons) - https://www.patreon.com/posts/56289291
NFT - https://rarible.com/token/0x60f80121c31a0d46b5279700f9df786054aa5ee5:1394673?
🛠 Notable Items:
Ledger Hardware Wallet - https://amzn.to/3khbFLh
1/8'' end mill - https://amzn.to/35BJBHH
Checkering File - https://amzn.to/3bg2iER
Chain Saw File 3/16 - https://amzn.to/3345Jwe
Mini-Mill (LMS) - https://amzn.to/2X9YOS4
Gulso Fasteners- https://www.makermaterialsupply.com/products/gulso-bolts-machined-stainless-steel-knife-handle-fasteners-1-4-head-diameter-t20-torx?_pos=20&_sid=fdfba325f&_ss=r
House / Work Sharpening System - https://housemade.us/collections/accessories/products/2x72-sharpening-system
McMaster Counter Bore (3102A11) - https://www.mcmaster.com/catalog/126/2608
5/32'' & 3/16'' (3103A12 & 3103A13) Pilots - https://www.mcmaster.com/counterbore-pilots
Stitching Pony (Requires Hinge Mod) - https://amzn.to/3dV5I41
John James Saddlers Harness Needles - https://amzn.to/31QzfWp
Paul Long DVD - https://knifemaking.com/products/basic-pouch-sheaths-by-paul-long-dvd
⭐ DIY Builds:
DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw
Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY
📷 Camera Gear:
Camera – Panasonic G7 – https://amzn.to/2SD8ekG
Microphone – Takstar - https://amzn.to/36euYLP
SD Card – 128GB - https://amzn.to/2tmVfZW
Narration Microphone (New 2021) - https://amzn.to/32741t6
Tripod - https://amzn.to/2XmXrwB
Magic Arm Mount - https://amzn.to/3a0iP1K
**************************************************
Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1
**************************************************
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
00:00 - Intro & Profiling
01:02 - Tang Milling
02:05 - Drilling & Filing
03:12 - Post HT Cleanup
04:00 - Bevel Grinding & Hand Sanding
06:15 - Handle Construction
09:55 - Sharpening
10:33 - Leather Sheath
13:48 - Knife Assembly & Thoughts
#knifemaking
#redbeardops
#bitcoin
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
59
views
1
comment
Gyuto Kitchen Knife Build for 2021 Challenge
The Gyuto Challenge 2021
📂 PDF Plans - https://www.patreon.com/posts/51977833
🔸 Red Beard Ops Patreon - https://www.patreon.com/RedBeardOps
🛠 Notable:
Heat Treating Service - https://www.jarodtodd.com/
House / Work Sharpening System - https://housemade.us/collections/accessories/products/2x72-sharpening-system
Kant Twist Clamp 1'' - https://amzn.to/332ygmu
Collet Block - https://amzn.to/394HiT0
Collets (ER32) - https://amzn.to/3kQGzqI
⭐ How To Videos:
DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw
How to Stonewash - https://youtu.be/m6oKy2UDeLI
Leather Sheath Tutorial - https://youtu.be/MhVWVc_rdKA
🗡 Knife Builds:
War Knife - https://youtu.be/LgT424a8_2M
Bird and Trout Knife - https://youtu.be/usDL_AI1ZqQ
Hand Forged Damascus Knife - https://youtu.be/CbOj-k7M1us
Wharncliffe Knife - https://youtu.be/HAE9V5wu5qA
Hidden Tang Fighter - https://youtu.be/3Dv3fj99vyM
📷 Camera Gear:
Camera – Panasonic G7 – https://amzn.to/2SD8ekG
Microphone – Takstar - https://amzn.to/36euYLP
SD Card – 128GB - https://amzn.to/2tmVfZW
Narration Microphone (New 2021) - https://amzn.to/32741t6
Tripod - https://amzn.to/2XmXrwB
Magic Arm Mount - https://amzn.to/3a0iP1K
**************************************************
Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1
**************************************************
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
#gyutochallenge
#knifemaking
#redbeardops
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
11
views
3
comments
Kydex / Leather Hybrid Sheath | Sheath For The War Knife | Knife Making
The "War Knife" we built last video was extremely lonely without a sheath, so I decided to make one! This sheath uses a kydex taco design with a leather strap to connect it to your belt. If you're looking to make a hybrid kydex / leather sheath stick around!
🔸 Red Beard Ops Patreon - https://www.patreon.com/RedBeardOps
🛠 Tools:
Kydex Eyelet Dies - https://amzn.to/2JujjzE
Heat Gun - https://amzn.to/3d8vyOt
Spring Dividers - https://amzn.to/3svYXJW
#2 Edge Beveler - https://amzn.to/2FqGivQ
Dye Marker Stick - https://amzn.to/37OVYnV
Dremel Power Burnishers - https://amzn.to/3iL16N4
Grey Ghost Graphics (Stamp) - http://greyghostgraphics.com/
High End Cutting Board - https://induscousa.com/hydroma-cutting-board/
🛠 Supplies:
Chicago Screws - https://amzn.to/3te1lpl
Kydex 0.060'' - https://amzn.to/39Zqe0f
Kydex Eyelets - https://amzn.to/2LeLlkI
Wickett & Craig Leather - http://wickett-craig.com/leathers/skirting/
Saddle Soap (Burnishing Agent Option #1) - https://amzn.to/3uyx6KV
Quick Slick (Burnishing Agent Option #2) - https://www.barrykingtools.com/finishingproducts.htm
Pro-Carv Casing - https://amzn.to/3dHQdMC
Neatsfood Oil - https://amzn.to/35GwyVP
🗡 How to Make Your First Knife - https://youtu.be/nk7vu2RYxvI
🗡 Knife Builds:
Bird and Trout Knife - https://youtu.be/usDL_AI1ZqQ
Hand Forged Damascus Knife - https://youtu.be/CbOj-k7M1us
Wharncliffe Knife - https://youtu.be/HAE9V5wu5qA
Hidden Tang Fighter - https://youtu.be/3Dv3fj99vyM
📷 Camera Gear:
Camera – Panasonic G7 – https://amzn.to/2SD8ekG
Microphone – Takstar - https://amzn.to/36euYLP
SD Card – 128GB - https://amzn.to/2tmVfZW
Narration Microphone (New 2021) - https://amzn.to/32741t6
Tripod - https://amzn.to/2XmXrwB
Magic Arm Mount - https://amzn.to/3a0iP1K
**************************************************
Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1
**************************************************
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
#knifemaking
#redbeardops
#knifemaker
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
165
views
2
comments
Battle Blade - Full Knife Build - Knife Making
Is this knife ready for WAR?!? I made this knife back in 2021 based on some viewer input! This design was the clear winner! There were many facets of this knife build that were new to me including hollow grinding the bevels and grinding in the clip on the blade. Trying out new techniques in the art of knife making is what makes this craft fun! I hope yall enjoy the build; and if you have any questions please put them in the comments below.
🔸 Red Beard Ops Patreon - https://www.patreon.com/RedBeardOps
🛠 Mentioned & Notable Items:
Chain Saw File 3/16 - https://amzn.to/3345Jwe
Checkering File - https://amzn.to/3bg2iER
Kant Twist Clamp 1'' - https://amzn.to/332ygmu
WEN Water Cooled Sharpener - https://amzn.to/3mkXEuY - https://amzn.to/2NKxhiy
Acid Enchant - https://amzn.to/2LLRxA7
🗡 Knife Builds:
Bird and Trout Knife - https://youtu.be/usDL_AI1ZqQ
Hand Forged Damascus Knife - https://youtu.be/CbOj-k7M1us
Wharncliffe Knife - https://youtu.be/HAE9V5wu5qA
Hidden Tang Fighter - https://youtu.be/3Dv3fj99vyM
📷 Camera Gear:
Camera – Panasonic G7 – https://amzn.to/2SD8ekG
Microphone – Takstar - https://amzn.to/36euYLP
SD Card – 128GB - https://amzn.to/2tmVfZW
Narration Microphone - https://amzn.to/2O2tFvK
Tripod - https://amzn.to/2XmXrwB
Magic Arm Mount - https://amzn.to/3a0iP1K
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
#knifemaking
#redbeardops
#knifemaker
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
125
views
8
comments
Custom Leather Maul Made Out of SCRAP! - Leather Working Tools
Turning scrap into a functional tool! Why buy one for $11.00 when you could spend numerous hours and resources making your own!?!? 😉 Joking aside, I'd venture to say this leather maul with it's weight and take down construction is superior to the cheap leather mauls on Amazon. Just a hunch! I made this guy back in early 2021 for my YouTube channel, but figured I'd post it here to help grow my Rumble catalog. Cheers folks!
⭐Want to support the channel and also gain access to my knife templates? Become a patron here - https://www.patreon.com/RedBeardOps
🛠 Mentioned & Notable Items:
Nylon 2'' OD - https://www.ebay.com/itm/143499296412
1/16th Hardened Dowell Pins - https://www.mscdirect.com/product/details/06020101?rd=k&tg=Recommendations&tpp=false&searchAhead=true&searchAheadTerm=06020101&typahddsp=06020101&hdrsrh=true
Bauer Bandsaw - https://amzn.to/30tVihM
Bandsaw Stand - (Swag) - https://amzn.to/2LN9QoE
Bandsaw Blades - https://amzn.to/2Z4fMRV
IRWIN Tap and Die Set - https://amzn.to/2LOnBn0
🗡 Knife Builds:
Hand Forged Damascus Knife - https://youtu.be/CbOj-k7M1us
Wharncliffe Knife - https://youtu.be/HAE9V5wu5qA
Hidden Tang Fighter - https://youtu.be/3Dv3fj99vyM
⚠️My Favorite PPE:
Resp-O-Rator (for beards) - https://amzn.to/2M6PMN7
3M Bluetooth Hearing Protection - https://amzn.to/38ock4U
📷 Camera Gear:
Camera – Panasonic G7 – https://amzn.to/2SD8ekG
Microphone – Takstar - https://amzn.to/36euYLP
SD Card – 128GB - https://amzn.to/2tmVfZW
Narration Microphone - https://amzn.to/2XvKHD2
Tripod - https://amzn.to/2XmXrwB
*********************************
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
#knifemaking
#redbeardops
#leather
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
71
views
3
comments
Knife Making | Bird and Trout Knife and Sheath | Full Build
Looking to build a bird and trout knife? Well look no further! I really like how this knife turned out and and hope yall like it too. I made this guy back in early 2021 for my YouTube channel, but figured I'd post it here to help grow my Rumble catalog.
The blade steel is 1084 and the handle is made out of wenge with white and black liners. The loveless fasteners have a 316 stainless core with 303 brass nuts and were custom fabricated for this knife. Anyways I really hope yall enjoy this build! If you're looking to get into the knife making game please make sure to look though my uploads for step by step tutorials geared towards the new maker. Cheers!
⭐Knife and Sheath Template can be found here - https://www.patreon.com/RedBeardOps
🛠 Mentioned & Notable Items:
Checkering File - https://amzn.to/3bg2iER
Chain Saw File 3/16 - https://amzn.to/3345Jwe
Kant Twist Clamp 1'' - https://amzn.to/332ygmu
Quick Slick - https://www.barrykingtools.com/finishingproducts.htm
John James Saddlers Harness Needles - https://amzn.to/31QzfWp
⚠️ My Favorite PPE:
Resp-O-Rator (for beards) - https://amzn.to/2M6PMN7
3M Bluetooth Hearing Protection - https://amzn.to/38ock4U
📷 Camera Gear:
Camera – Panasonic G7 – https://amzn.to/2SD8ekG
Microphone – Takstar - https://amzn.to/36euYLP
SD Card – 128GB - https://amzn.to/2tmVfZW
Narration Microphone - https://amzn.to/2XvKHD2
Tripod - https://amzn.to/2XmXrwB
⭐Red Beard Amazon Store - https://www.amazon.com/shop/redbeardops
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
#knifemaking
#redbeardops
#knifemaker
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
100
views
5
comments
How to Stone Wash A Carbon Steel Blade | Knife Making Tips
This is a guide I made in 2021 on how I acid stone wash my knives. The stone wash finish is one that I like to use a lot on my knifes because A.) I think it looks good and B.) I feel like it wears very well on a hard use knife. If yall got something out of this stone washing tutorial, please let me know in the comments below!
🔸 Red Beard Ops Patreon - https://www.patreon.com/RedBeardOps
🛠 Mentioned & Notable Items:
Acid Enchant - https://amzn.to/2LLRxA7
Steel Wool - https://amzn.to/3uOdD9b
🗡 Knife Builds:
Bird and Trout Knife - https://youtu.be/usDL_AI1ZqQ
Hand Forged Damascus Knife - https://youtu.be/CbOj-k7M1us
Wharncliffe Knife - https://youtu.be/HAE9V5wu5qA
Hidden Tang Fighter - https://youtu.be/3Dv3fj99vyM
📷 Camera Gear:
Camera – Panasonic G7 – https://amzn.to/2SD8ekG
Microphone – Takstar - https://amzn.to/36euYLP
SD Card – 128GB - https://amzn.to/2tmVfZW
Narration Microphone - https://amzn.to/2XvKHD2
Tripod - https://amzn.to/2XmXrwB
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
#knifemaking
#redbeardops
#knifemaker
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
24
views
3
comments
How To Make A Leather Pouch Sheath
This video condenses everything I've learned about leather work and sheath making into one concise tutorial. I've really gown to enjoy working with leather, and I hope that this leather sheath guide will influence some of you new makers to give leather work a shot! I made this sheath back in 2021 and I figured I'd post it here to build my Rumble catalog! Cheers!
🔸 Red Beard Ops Patreon - https://www.patreon.com/RedBeardOps
🛠 Leather Tools:
Leather Skiver - https://amzn.to/2PhcOFL
#2 Edge Beveler - https://amzn.to/2FqGivQ
#4 Edge Beveler - https://amzn.to/3bCxK1q
Dye Marker Stick - https://amzn.to/37OVYnV
John James Saddlers Harness Needles - https://amzn.to/31QzfWp
Japan Select Basket Stamp - https://amzn.to/2NDRg5q
Stitch Groover - https://amzn.to/3iHp0J3
Dremel Power Burnishers - https://amzn.to/3iL16N4
High End Cutting Board - https://induscousa.com/hydroma-cutting-board/
Spring Dividers - https://amzn.to/3svYXJW
Stitching Pony (Requires Hinge Mod) - https://amzn.to/3dV5I41
🛠 Leather Supplies:
Wickett & Craig Leather - http://wickett-craig.com/leathers/skirting/
Saddle Soap (Burnishing Agent #1) - https://amzn.to/3uyx6KV
Quick Slick (Burnishing Agent #2) - https://www.barrykingtools.com/finishingproducts.htm
1mm Waxed Thread - https://amzn.to/3kIzp9g
Contact Cement - https://amzn.to/3krX0LI
Neatsfood Oil - https://amzn.to/35GwyVP
Wool Daubers - https://amzn.to/3418Cz5
Bag Kote - https://amzn.to/3aTE1Gx
Fiebings Pro Dye (Dark Brown) - https://amzn.to/2ZReiZd
Pro-Carv Casing - https://amzn.to/3dHQdMC
Grey Ghost Graphics (Stamp) - http://greyghostgraphics.com/
🗡 How to Make Your First Knife - https://youtu.be/nk7vu2RYxvI
🗡 Knife Builds:
Bird and Trout Knife - https://youtu.be/usDL_AI1ZqQ
Hand Forged Damascus Knife - https://youtu.be/CbOj-k7M1us
Wharncliffe Knife - https://youtu.be/HAE9V5wu5qA
Hidden Tang Fighter - https://youtu.be/3Dv3fj99vyM
📷 Camera Gear:
Camera – Panasonic G7 – https://amzn.to/2SD8ekG
Microphone – Takstar - https://amzn.to/36euYLP
SD Card – 128GB - https://amzn.to/2tmVfZW
Narration Microphone - https://amzn.to/2XvKHD2
Tripod - https://amzn.to/2XmXrwB
Instagram: https://www.instagram.com/redbeardops/
Twitter: https://twitter.com/RedBeardOps
00:00 - Making A Template
02:48 - Cutting Pattern and Finishing Top
03:35 - Stamping and Tooling
08:55 - Affixing Belt Loop
11:39 - Gluing, Folding, Leveling
12:57 - Edge Beveling, Grooving & Stitching
15:45 - Edge finishing & Bag Kote
17:25 - Final Product
#knifemaking
#redbeardops
#leathercraft
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.
121
views
5
comments