RedBeardOps

Well yall, here is the full build! Enjoy! 🛠 Notable Items and Tools: Long Gooseneck Light - https://amzn.to/3fcEyYO LMS 3990 Mill - https://littlemachineshop.com/3990?Source=RedBeard Diomedes Sheaths - http://diomedesindustries.com/ Rotary Tool - https://amzn.to/3PwpFxH Rotary Collets - https://amzn.to/3J55dlf Microscope - https://amzn.to/3oyT2nb Carbide Bur (round 1/4) - https://lascodiamond.com/LascoDental-FG-Carbide.html Angle Finder - https://amzn.to/3N5ufkP Endmill (Long) - https://amzn.to/3OsNPZl Face Mill - https://amzn.to/3uSqeII 🔸 Red Beard Ops Website - https://redbeardops.square.site/ 🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps ⭐ Full Narrated Episodes Of This Build: Part 1 - https://youtu.be/52NsShM08LU Part 2 - https://youtu.be/a-l1g_ujZR4 Part 3 - https://youtu.be/1a1LALrwNzQ Part 4 - https://youtu.be/x92h0rasaE8 ⭐ How To Videos: DIY Disc Grinder - https://youtu.be/680VFZ8Tm1g Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw ************************************************** Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1 ************************************************** Instagram: https://www.instagram.com/redbeardops/ Twitter: https://twitter.com/RedBeardOps #redbeardops #knifemaking #americanmade ********************************************************** A Notice from Red Beard Ops LLC: The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

Yep, gonna test this guy... after finishing it... I'm scared.... ⭐ RBO WebSITE - https://redbeardops.square.site/s/shop 🔸Kyle Royer's Courses - https://www.learnknifemaking.com/ - @KyleRoyerKnives 🔸Oleg's Wood Blocks - https://knife-wood.com/ 🔸Diomedes Sheaths - http://diomedesindustries.com/ 🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps 🛠 Notable Items and Tools: LMS 3990 Mill - https://littlemachineshop.com/3990?Source=RedBeard Part 1 - https://youtu.be/52NsShM08LU Part 2 - https://youtu.be/a-l1g_ujZR4 Part 3 - https://youtu.be/1a1LALrwNzQ Part 4 - https://youtu.be/x92h0rasaE8 ⭐ How To Videos: DIY Disc Grinder - https://youtu.be/680VFZ8Tm1g Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw ************************************************** Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1 ************************************************** Instagram: https://www.instagram.com/redbeardops/ Twitter: https://twitter.com/RedBeardOps #redbeardops #bowieknife #customknife ********************************************************** A Notice from Red Beard Ops LLC: The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

I'm going to be making a lot of these.... ⭐xTool D1 20W Laser Kit - https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=RedBeardOps&utm_source=influencer&variant=43022796554479 ⭐ xTool Air Assist - https://www.xtool.com/products/air-assist-set?ref=RedBeardOps&utm_source=influencer MakerCase Plans - https://www.makercase.com/#/basicbox 🛠 Notable Items and Tools: 12x18 Wood - https://amzn.to/3Dt90If Honeycomb Table (400x400mm) - https://amzn.to/3RmYaba Amazon Link To XTOOL - https://amzn.to/3qsZbCG #xtool #lasercuttingmachine #laserengraving 00:00 - Intro 00:24 - LightBurn Set-Up 08:11 - Into The Shop 14:06 - Box Assembly ********************************************************** A Notice from Red Beard Ops LLC: The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

I can't believe what this thing can do to hardened carbon steel.... ⭐xTool D1 20W Laser Kit - https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=RedBeardOps&utm_source=influencer&variant=43022796554479 ⭐ xTool Air Assist - https://www.xtool.com/products/air-assist-set?ref=RedBeardOps&utm_source=influencer 🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps 🛠 Notable Items and Tools: Honeycomb Table (400x400mm) - https://amzn.to/3RmYaba 1/8'' Birch Plywood - https://amzn.to/3BbhPEZ Amazon Link To XTOOL - https://amzn.to/3qsZbCG 🔸Files: - https://www.patreon.com/posts/x-tool-laser-71480469?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator ⭐ How To Videos: DIY Disc Grinder - https://youtu.be/680VFZ8Tm1g Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw ************************************************** Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1 ************************************************** Instagram: https://www.instagram.com/redbeardops/ Twitter: https://twitter.com/RedBeardOps #redbeardops #xtool #lasercuttingmachine 00:00 - Setting Up An Awesome Video 02:06 - Knife Templates 04:50 - Leather / Cardboard Engraving Tests 09:01 - Full Leather Sheath Template 19:10 - Etching Carbon Steel ********************************************************** A Notice from Red Beard Ops LLC: The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

Do you need a BEEFY tool stand? Well this one is for you. This DIY kit from @Beck's Armory is pretty awesome. You can use "redbeardops" as a promo code to get $5 off your order. ⭐LINK TO STAND - https://becksarmory.com/product/heavy-duty-machine-pedestal/?ref=1082 ⭐BA Vander Sander Chassis - https://becksarmory.com/https://becksarmory.com/product/b-a-vander-sander-kit/?ref=1082 🛠 Notable Items and Tools: Gorilla Seal - https://amzn.to/3S0LrLN Casters (2000lbs) - https://amzn.to/3S04upC 7'' Angle Grinder - https://www.harborfreight.com/15-amp-7-in9-in-trigger-grip-angle-grinder-57363.html Welder - https://amzn.to/39x1TSQ Welding Table - https://amzn.to/3zLyvTm Squares - https://fireballtool.com/collections/squares ************************************************** Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1 ************************************************** Instagram: https://www.instagram.com/redbeardops/ Twitter: https://twitter.com/RedBeardOps #redbeardops #toolstand #toolreviews ********************************************************** A Notice from Red Beard Ops LLC: The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

I recently completed a narrated 3 part build series for my "June Hunter." I figured some of yall may enjoy the fully compiled movie without my voice! If you're interested in the details of this build make sure to check out the other videos in the series. Cheers 🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps 🛠 Notable Items and Tools: 3M Versaflo Respirator - https://amzn.to/3HLbz89 Diamond Sharpening Stone - https://amzn.to/3F3DmzP LMS 3990 Mill - https://littlemachineshop.com/3990?Source=RedBeard Grobet 6'' File - https://amzn.to/3zLR0Hc Cabinetmaker Rasp - https://amzn.to/3O5ezPP ⭐ How To Videos: Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw 🗡 Knife Builds: Crypto Knife - https://youtu.be/_Ph_LYE6Gcc Raindrop Kitchen Knife - https://youtu.be/qwGdKEtOhrk Tactical Fixed Blade - https://youtu.be/PhaTADlMcuY ************************************************** Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1 ************************************************** Instagram: https://www.instagram.com/redbeardops/ Twitter: https://twitter.com/RedBeardOps #redbeardops #knifemaking #knifemaker ********************************************************** A Notice from Red Beard Ops LLC: The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

"The world ain't all sunshine and rainbows. It's a very mean and nasty place, and I don't care how tough you are, it will beat you to your knees and keep you there permanently if you let it. You, me or nobody is gonna hit as hard as life. But it ain't about how hard you hit, it's about how hard you can get hit and keep moving forward. How much you can take and keep moving forward. That's how winning is done!" - Rocky Balboa on Knife Making 🔸Oleg's Wood Blocks - https://knife-wood.com/ 🔸Kyle Royer's Courses - https://www.learnknifemaking.com/ ⭐Red Beard Engineered Mini Split - https://youtu.be/FditJqUenAk 🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps 🛠 Notable Items and Tools: Rotary Tool - https://amzn.to/3PwpFxH Rotary Collets - https://amzn.to/3J55dlf Microscope - https://amzn.to/3oyT2nb Carbide Bur (round 1/4) - https://lascodiamond.com/LascoDental-FG-Carbide.html LMS 3990 Mill - https://littlemachineshop.com/3990?Source=RedBeard 5min Epoxy - https://amzn.to/3zwqSyC 🔥My Mini Split Install - https://youtu.be/FditJqUenAk ⭐ How To Videos: DIY Disc Grinder - https://youtu.be/680VFZ8Tm1g Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw ************************************************** Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1 ************************************************** Instagram: https://www.instagram.com/redbeardops/ Twitter: https://twitter.com/RedBeardOps #redbeardops #knifemaking #bladesmithing ********************************************************** A Notice from Red Beard Ops LLC: The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

Part 2 of my 7'' takedown bowie. This isn't easy. 🔸A link to Kyle's courses here: https://www.learnknifemaking.com/ Part 1 - https://youtu.be/52NsShM08LU Part 2 - https://youtu.be/a-l1g_ujZR4 Part 3 - https://youtu.be/1a1LALrwNzQ Part 4 - 🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps 🛠 Notable Items and Tools: Rotary Tool - https://amzn.to/3PwpFxH Rotary Collets - https://amzn.to/3J55dlf Microscope - https://amzn.to/3oyT2nb Carbide Bur (round 1/4) - https://lascodiamond.com/LascoDental-FG-Carbide.html LMS 3990 Mill - https://littlemachineshop.com/3990?Source=RedBeard ⭐ How To Videos: DIY Disc Grinder - https://youtu.be/680VFZ8Tm1g Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw ************************************************** Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1 ************************************************** Instagram: https://www.instagram.com/redbeardops/ Twitter: https://twitter.com/RedBeardOps #redbeardops #knifemaking #bladesmithing ********************************************************** A Notice from Red Beard Ops LLC: The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

Here marks the start of another build series! I'll be building a 7'' takedown bowie inspired by the great @KyleRoyerKnives . Wish me luck because this is going to be hard! 🔸A link to his courses can be found here: https://www.learnknifemaking.com/ 🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps 🛠 Notable Items and Tools: 3M Versaflo Respirator - https://amzn.to/3HLbz89 Push Stick - https://www.mcmaster.com/catalog/128/4008 LMS 3990 Mill - https://littlemachineshop.com/3990?Source=RedBeard File Guide - https://brian-bump-3hth.squarespace.com/fileguides/brucebump ⭐ How To Videos: DIY Disc Grinder - https://youtu.be/680VFZ8Tm1g Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw 🗡 Knife Builds: Crypto Knife - https://youtu.be/_Ph_LYE6Gcc Raindrop Kitchen Knife - https://youtu.be/qwGdKEtOhrk Tactical Fixed Blade - https://youtu.be/PhaTADlMcuY ************************************************** Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1 ************************************************** Instagram: https://www.instagram.com/redbeardops/ Twitter: https://twitter.com/RedBeardOps #redbeardops #knifemaking #bowieknife ********************************************************** A Notice from Red Beard Ops LLC: The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

An awesome weekend project that will greatly improve your quality of life! Thanks to this Della mini-split my shop is now livable during the hottest part of the day here in Texas. In this video I go though how I got this ductless system installed. ⭐Della Mini Split - https://amzn.to/3A4Oaf1 🗒 Items: Mounting Bracket - https://amzn.to/3PyIGie Line Cover - https://amzn.to/3Ci0mf8 10 AWG Whip - https://amzn.to/3ChUYbV Nylog Blue - https://amzn.to/3T0f4NK Spray Foam - https://amzn.to/3dFrla7 🛠 Tools: Vacuum Pump / Gauge Set - https://amzn.to/3AvWG8u Service Port Adaptor - https://amzn.to/3T0Dxm0 3.5'' Hole Saw - https://amzn.to/3QTURaq Torque Wrench - https://amzn.to/3c38q8M Crowfoot Set - https://amzn.to/3TaVFKn Flaring Tool - https://amzn.to/3CaB8zr Copper Pipe Cutter - https://amzn.to/3K3jfV4 #airconditioner #minisplit #ductless ********************************************************** A Notice from Red Beard Ops LLC: The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

This piece of PPE has been a gamechanger for comfort and safety in my shop! If you have a beard... it's hard to beat in terms of comfort and effectiveness. ⭐ 3M Versaflo Respirator - https://amzn.to/3O6nZK9 Elgin Earbuds - https://amzn.to/3OnDKwA Visor Covers - https://amzn.to/3y6q3gr Resp-O-Rator - https://amzn.to/2M6PMN7 ✅Become a RBO Patron - https://www.patreon.com/RedBeardOps 🗡 Knife Builds: Crypto Knife - https://youtu.be/_Ph_LYE6Gcc Raindrop Kitchen Knife - https://youtu.be/qwGdKEtOhrk Tactical Fixed Blade - https://youtu.be/PhaTADlMcuY 🛠 DIY Builds: Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw ************************************************** Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1 ************************************************** Instagram: https://www.instagram.com/redbeardops/ Twitter: https://twitter.com/RedBeardOps #redbeardops #safety #ppe ********************************************************** A Notice from Red Beard Ops LLC: The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

Beefing up my DIY hydraulic forging press! These are simple upgrades, and I feel like they're no brainers. This press has been doing a great job for me since refurbishing / rebuilding! ⭐Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY ⭐DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw 🗡 Knife Builds: Crypto Knife - https://youtu.be/_Ph_LYE6Gcc Raindrop Kitchen Knife - https://youtu.be/qwGdKEtOhrk Tactical Fixed Blade - https://youtu.be/PhaTADlMcuY ************************************************** Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1 ************************************************** Instagram: https://www.instagram.com/redbeardops/ Twitter: https://twitter.com/RedBeardOps #redbeardops #hydraulicpress #diyproject ********************************************************** A Notice from Red Beard Ops LLC: The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

This is part three of my video series on making a traditional hidden tang hunter. Let me know what yall think of the finished product! 🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps 🛠 Notable Items and Tools: Grobet 6'' File - https://amzn.to/3zLR0Hc File Card - https://amzn.to/3tKDH5Y Cabinetmaker Rasp - https://amzn.to/3O5ezPP Angle Finder - https://amzn.to/3N5ufkP Endmill (Long) - https://amzn.to/3OsNPZl Face Mill - https://amzn.to/3uSqeII WEN Sharpening - https://amzn.to/3zJW7Yr 1/16 pins - https://www.mscdirect.com/product/details/06020101?rd=k&tg=Recommendations&tpp=false&searchAhead=true&searchAheadTerm=06020101&typahddsp=06020101&hdrsrh=true 3 Jaw Chuck - https://littlemachineshop.com/1698?Source=RedBeard ⭐ How To Videos: Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw 🗡 Knife Builds: Crypto Knife - https://youtu.be/_Ph_LYE6Gcc Raindrop Kitchen Knife - https://youtu.be/qwGdKEtOhrk Tactical Fixed Blade - https://youtu.be/PhaTADlMcuY ************************************************** Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1 ************************************************** Instagram: https://www.instagram.com/redbeardops/ Twitter: https://twitter.com/RedBeardOps #redbeardops #knifemaking #huntingknife ********************************************************** A Notice from Red Beard Ops LLC: The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

Full DIY disc grinder / sander build including the frame, vfd wiring, and testing. I tell yall what... this thing is awesome... I'm shocked at how flat it can make things; but in all honesty I should of known after watching many accomplished knife makers use one! So far with the amount of testing I've been able to do, I'd say this is a better piece of kit than a surface grinding attachment if you had to allocate funds to only one of them. ⭐ Instructions - https://www.patreon.com/posts/67968795 ✅ Build Parts: BA Vander Sander - https://becksarmory.com/https://becksarmory.com/product/b-a-vander-sander-kit/?ref=1082 1.5HP Motor - https://amzn.to/3Qpd6oS VFD - https://amzn.to/3N2bXAU Ammo Can - https://amzn.to/3QwD21P 10/4 Wire - https://amzn.to/3N7LtOe 14/3 Wire - https://amzn.to/3zIEKr7 Switch - https://amzn.to/3OnSDPp Cable Protectors - https://amzn.to/3dW3ocn 9'' disc - https://trugrit.com/product/9-billet-disc-with-5-8-arbor-flat/ Ryno-Wet Sand Paper - https://popsknife.supplies/collections/indasa Feathering Compound - https://amzn.to/3tKrTkn 🛠 Notable Items and Tools: Wire Stripper - https://amzn.to/3zLpzxc Welder - https://amzn.to/39x1TSQ Welding Table - https://amzn.to/3zLyvTm Squares - https://fireballtool.com/collections/squares ⭐ How To Videos: Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw 🗡 Knife Builds: Crypto Knife - https://youtu.be/_Ph_LYE6Gcc Raindrop Kitchen Knife - https://youtu.be/qwGdKEtOhrk Tactical Fixed Blade - https://youtu.be/PhaTADlMcuY ************************************************** Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1 ************************************************** Instagram: https://www.instagram.com/redbeardops/ Twitter: https://twitter.com/RedBeardOps #redbeardops #discgrinder #knifemaking 00:00 - Special Thanks 00:38 - Section 1 (Chassis) 03:14 - Section 2 (Wiring) 15:57 - Section 3 (Disc / Testing) ********************************************************** A Notice from Red Beard Ops LLC: The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

This is part two of my video series on making a traditional hidden tang hunter. I think we're getting somewhere with this build. I hope yall enjoy the series! 🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps 🛠 Notable Items and Tools: File Guide - https://brian-bump-3hth.squarespace.com/fileguides/brucebump Face Mill - https://amzn.to/3uSqeII LMS 5514 DRO - https://littlemachineshop.com/5514?Source=RedBeard LMS 3990 Mill - https://littlemachineshop.com/3990?Source=RedBeard ⭐ How To Videos: Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw 🗡 Knife Builds: Crypto Knife - https://youtu.be/_Ph_LYE6Gcc Raindrop Kitchen Knife - https://youtu.be/qwGdKEtOhrk Tactical Fixed Blade - https://youtu.be/PhaTADlMcuY 📷 Camera Gear: Camera – Panasonic G7 – https://amzn.to/2SD8ekG Microphone – Takstar - https://amzn.to/36euYLP SD Card – 128GB - https://amzn.to/2tmVfZW Narration Microphone (New 2021) - https://amzn.to/32741t6 Tripod - https://amzn.to/2XmXrwB Magic Arm Mount - https://amzn.to/3a0iP1K ************************************************** Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1 ************************************************** Instagram: https://www.instagram.com/redbeardops/ Twitter: https://twitter.com/RedBeardOps #redbeardops #knifemaking #huntingknife ********************************************************** A Notice from Red Beard Ops LLC: The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

This is part one of my video series on making a traditional hidden tang hunter. These style of knives are more intricate and take a significantly longer time to make, so I figured they fit into the segmented video build template nicely! I hope yall enjoy the series! 🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps 🛠 Notable Items and Tools: 3M Versaflo Respirator - https://amzn.to/3HLbz89 Diamond Sharpening Stone - https://amzn.to/3F3DmzP Push Stick - https://www.mcmaster.com/catalog/128/4008 Marshall Regulator - https://amzn.to/38UkPKN Steel Braded Propane Hose - https://amzn.to/3z2sQYR ⭐ How To Videos: Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw 🗡 Knife Builds: Crypto Knife - https://youtu.be/_Ph_LYE6Gcc Raindrop Kitchen Knife - https://youtu.be/qwGdKEtOhrk Tactical Fixed Blade - https://youtu.be/PhaTADlMcuY 📷 Camera Gear: Camera – Panasonic G7 – https://amzn.to/2SD8ekG Microphone – Takstar - https://amzn.to/36euYLP SD Card – 128GB - https://amzn.to/2tmVfZW Narration Microphone (New 2021) - https://amzn.to/32741t6 Tripod - https://amzn.to/2XmXrwB Magic Arm Mount - https://amzn.to/3a0iP1K ************************************************** Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1 ************************************************** Instagram: https://www.instagram.com/redbeardops/ Twitter: https://twitter.com/RedBeardOps #redbeardops #knifemaking #huntingknife ********************************************************** A Notice from Red Beard Ops LLC: The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

How to install a new 3-jaw chuck on a 1937 Atlas / Craftsman lathe (1-1/2- 8 spindle). Major thanks to the team at littlemachineshop.com for supplying the channel with this chuck and adaptor. 🛠 LMS Adaptor - https://littlemachineshop.com/1918?Source=RedBeard 🛠 LMS Chuck - https://littlemachineshop.com/1698?Source=RedBeard 🗡 Knife Builds: Crypto Knife - https://youtu.be/_Ph_LYE6Gcc Raindrop Kitchen Knife - https://youtu.be/qwGdKEtOhrk Tactical Fixed Blade - https://youtu.be/PhaTADlMcuY ⭐ How To Videos: Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw ************************************************** Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1 ************************************************** Instagram: https://www.instagram.com/redbeardops/ Twitter: https://twitter.com/RedBeardOps #redbeardops #littlemachineshop #lathe ********************************************************** A Notice from Red Beard Ops LLC: The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

A kit knife is a great way to start your knife making journey; or at the very least a fun weekend project in your shop! It's time to get in the game! Jantz Pattern 40 Blade - https://knifemaking.com/products/pattern-40?variant=31078704414856 ⭐ Charity Auction - https://www.ebay.com/itm/334433451311 🛠 Supplies: 3/16 Brass Rod - https://amzn.to/3Kxihz0 Budget Epoxy - https://amzn.to/3vx6X1y IronWood Scales - https://amzn.to/37WDZzc Canvas Micarta Scales - https://amzn.to/3kpVqed 🛠 Tools: Cabinetmaker Rasp - https://amzn.to/3LBc06z Nicholson File Set - https://amzn.to/3kA3AAt Diamond Sharpening Stone - https://amzn.to/3F3DmzP Kant Twist Clamp - https://amzn.to/3MCehi2 1x72 Leather Strop - https://amzn.to/3LBcaeb 🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps 🗡 Knife Builds: Crypto Knife - https://youtu.be/_Ph_LYE6Gcc Raindrop Kitchen Knife - https://youtu.be/qwGdKEtOhrk Tactical Fixed Blade - https://youtu.be/PhaTADlMcuY ⭐ How To Videos: Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw ************************************************** Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1 ************************************************** Instagram: https://www.instagram.com/redbeardops/ Twitter: https://twitter.com/RedBeardOps #redbeardops #knifemaking #weekendwarrior 00:00 - Motivation 01:34 - Blade Cleanup 3:04 - Handle Scale Options 3:58 - Handling 9:40 - Sharpening 10:51 - Project Recap 13:00 - WWP Auction ********************************************************** A Notice from Red Beard Ops LLC: The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

I've been making more hidden tang knives nowdays and one of the harder parts of the process is getting a good guard fit. For that reason I'm willing to do just about anything to make that process easier! I got the original idea to use table stops when slotting from @Karl Andersen and feel like this is a nice advancement of that idea. ✏️PLANS - https://www.patreon.com/posts/65509878 🛠 Build Items: T-Nuts - https://amzn.to/3k8cIwi M4 Screws - https://amzn.to/3K5OHQR M5 Screws - https://amzn.to/3MpHQDl Washer Set - https://amzn.to/3EH5lFh ⭐Mill and DRO: LMS 5514 DRO - https://littlemachineshop.com/5514?Source=RedBeard LMS 3990 Mill - https://littlemachineshop.com/3990?Source=RedBeard Academy of Lagado - https://sites.google.com/site/lagadoacademy/machining---lathes-mills-etc/tools---mill-table-stops ⭐ How To Videos: Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw 📷 Camera Gear: Camera – Panasonic G7 – https://amzn.to/2SD8ekG Microphone – Takstar - https://amzn.to/36euYLP SD Card – 128GB - https://amzn.to/2tmVfZW Narration Microphone (New 2021) - https://amzn.to/32741t6 Tripod - https://amzn.to/2XmXrwB Magic Arm Mount - https://amzn.to/3a0iP1K ************************************************** Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1 ************************************************** Instagram: https://www.instagram.com/redbeardops/ Twitter: https://twitter.com/RedBeardOps #redbeardops #minimill #diyproject 00:00 - Intro / Motivation 00:58 - Center Stop Bar 02:01 - Traveling Stop Blocks 02:48 - Hardware & Assembly 03:55 - Operation ********************************************************** A Notice from Red Beard Ops LLC: The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

Well it's time for another makers of youtube challenge! This time we're making daggers. Considering this is my first dagger, first fuller, and first knife over 17 inches I'm really pleased with how it turned out! Make sure to vote with the link below: ⭐Vote Here - https://docs.google.com/forms/d/e/1FAIpQLScEAHJ49efKyoFkZKwn4p0ZY1TJuHyj6f_hNCXw4qt5ZVl24g/viewform ⭐ Dagger Plans For Patrons - https://www.patreon.com/posts/65169127 🛠 Notable Items and Supplies: LMS 3990 Mill - https://littlemachineshop.com/3990?Source=RedBeard Face Mill - https://amzn.to/3uSqeII 3M Versaflo Respirator - https://amzn.to/3HLbz89 3/16'' Extra Long End Mill - https://amzn.to/3vr6soH Elgin Earbuds - https://amzn.to/3go81MX Edge Finder - https://amzn.to/37BMC1p NorthRidge Tool For Small Wheels - http://www.northridgetool.com/contact/ Collet Block - https://amzn.to/394HiT0 Collets (ER32) - https://amzn.to/3kQGzqI Ebay Stainless Cutoffs - https://www.ebay.com/itm/324437120480?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2648 ⭐ How To Videos: Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw ************************************************** Challenge Participants: @Aleeknives : https://www.youtube.com/c/Aleeknives @B. Kohn Knives : https://www.youtube.com/channel/UCOdEhPeKNd8iI1eGM0QFjnA @Black Beard Projects : https://www.youtube.com/c/BlackBeardProjects @Brackin Blades Forge : https://www.youtube.com/c/BrackinBladesForge @DB Craft World : https://www.youtube.com/c/DBCraftWorld @Drew Lininger : https://www.youtube.com/channel/UCFFj4GfTiDriipslEpYncAA @Encik Alee : https://www.youtube.com/c/EncikAlee @HANS : https://www.youtube.com/c/HANSworkshop @Heavy_Forge : https://www.youtube.com/user/N2FLEXN @HouseMade : https://www.youtube.com/c/HouseWork123 @Liam J. Penn : https://www.youtube.com/channel/UCl_IOByHwdn2PTkT3EyC4iw @Mystic Mountain Forge : https://www.youtube.com/c/MysticMountainForge @Njord Artisan : https://www.youtube.com/c/NjordArtisan @Sperber- Knives : https://www.youtube.com/channel/UCYgFiVrouzX5OH68ZJuXBWw @The Art of Craftsmanship : https://www.youtube.com/c/TheArtofCraftsmanship @The Rivers' Experience : https://www.youtube.com/channel/UCdYgdTzDUMUYlqbJOiyVLQg @Tyrell Knifeworks : https://www.youtube.com/c/TyrellKnifeworks @Wengels Workshop : https://www.youtube.com/c/Wengel12 ************************************************** 🗡 Knife Builds: Crypto Knife - https://youtu.be/_Ph_LYE6Gcc Raindrop Kitchen Knife - https://youtu.be/qwGdKEtOhrk Tactical Fixed Blade - https://youtu.be/PhaTADlMcuY 📷 Camera Gear: Camera – Panasonic G7 – https://amzn.to/2SD8ekG Microphone – Takstar - https://amzn.to/36euYLP SD Card – 128GB - https://amzn.to/2tmVfZW Narration Microphone (New 2021) - https://amzn.to/32741t6 Tripod - https://amzn.to/2XmXrwB Magic Arm Mount - https://amzn.to/3a0iP1K ************************************************** Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1 ************************************************** 00:00 - Hilarious Intro 00:47 - Fuller 02:47 - Profile 03:58 - Rough Bevel Grinding 04:28 - Heat Treating 05:31 - Bevels / Plunges / Waterfall 06:27 - Milling Ricasso 07:30 - Guard Fitting 09:20 - Handle Slotting 09:59 - Tang Threads & Pommel 11:51 - Finial 12:39 - Locator Pins 13:06 - Shaping Guard / Handle 15:21 - Maker's Mark 15:41 - Final Assembly 17:05 - Pommel Cleanup & Sharpening 17:55 - What I Like About The Dagger 18:50 - What I Don't Like About The Dagger ************************************************** Instagram: https://www.instagram.com/redbeardops/ Twitter: https://twitter.com/RedBeardOps #redbeardops #thedaggerchallenge #daggerchallenge ********************************************************** A Notice from Red Beard Ops LLC: The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

This is a quick walkthrough of my temporary garage workshop. Building a new shop can take some time; so I wanted to make sure to get this temp shop set up to have a place to create while the build is going on. 🛠 Notable Additional Items: Apollo Manual Forklift - https://amzn.to/3Inbzfa 3M Versaflo Respirator - https://amzn.to/3HLbz89 LMS 3990 Mill - https://littlemachineshop.com/3990?Source=RedBeard LMS 5514 DRO - https://littlemachineshop.com/5514?Source=RedBeard Bauer Bandsaw - https://amzn.to/30tVihM Bandsaw Stand - (Swag) - https://amzn.to/2LN9QoE ⚒ DIY Builds: Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw 📷 Camera Gear: Camera – Panasonic G7 – https://amzn.to/2SD8ekG Microphone – Takstar - https://amzn.to/36euYLP SD Card – 128GB - https://amzn.to/2tmVfZW Narration Microphone (New 2021) - https://amzn.to/32741t6 Tripod - https://amzn.to/2XmXrwB Magic Arm Mount - https://amzn.to/3a0iP1K ************************************************** Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1 ************************************************** Instagram: https://www.instagram.com/redbeardops/ Twitter: https://twitter.com/RedBeardOps #redbeardops #garageshop #shoptour ********************************************************** A Notice from Red Beard Ops LLC: The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

A Digital Read Out has the potential to increase a mills usability and precision. I'm super excited to have a DRO on my machine, and I look forward to testing it further in the future. This video shows the installation and calibration of a Digital Readout on a mini mill. ⭐ LMS 5514 DRO - https://littlemachineshop.com/5514?Source=RedBeard ⭐ LMS 3990 Mill - https://littlemachineshop.com/3990?Source=RedBeard 🛠 Notable Additional Items: Power Supply Switch - https://amzn.to/3v6cXyq 🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps ⚒ DIY Builds: Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw 📷 Camera Gear: Camera – Panasonic G7 – https://amzn.to/2SD8ekG Microphone – Takstar - https://amzn.to/36euYLP SD Card – 128GB - https://amzn.to/2tmVfZW Narration Microphone (New 2021) - https://amzn.to/32741t6 Tripod - https://amzn.to/2XmXrwB Magic Arm Mount - https://amzn.to/3a0iP1K ************************************************** Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1 ************************************************** Instagram: https://www.instagram.com/redbeardops/ Twitter: https://twitter.com/RedBeardOps #redbeardops #millingmachine #machineshop 00:00 - UnBoxing 00:41 - Mechanical Install 07:04 - Electrical Install 09:18 - Calibration 11:26 - Finishing Up ********************************************************** A Notice from Red Beard Ops LLC: The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

Whew! Well I'm moved and it's time to make a knife! I have the temp shop set up to the point that I can work in there; so naturally I wanted to get back to the basics with this 1084 full tang knife. Hope yall enjoy the build! ⚙ New Red Beard Engineered Channel - https://youtu.be/YkExB-Bujyo ⭐ Knife Plans For Patrons - https://www.patreon.com/posts/62163725 🛠 Notable Items and Supplies: LMS 3990 Mill - https://littlemachineshop.com/3990?Source=RedBeard Checkering File - https://amzn.to/3bg2iER Chain Saw File 3/16 - https://amzn.to/3345Jwe 3M Versaflo Respirator - https://amzn.to/3HLbz89 Elgin Earbuds - https://amzn.to/3go81MX ⭐ How To Videos: Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw 🗡 Knife Builds: Crypto Knife - https://youtu.be/_Ph_LYE6Gcc Raindrop Kitchen Knife - https://youtu.be/qwGdKEtOhrk Battle Blade - https://youtu.be/LgT424a8_2M 📷 Camera Gear: Camera – Panasonic G7 – https://amzn.to/2SD8ekG Microphone – Takstar - https://amzn.to/36euYLP SD Card – 128GB - https://amzn.to/2tmVfZW Narration Microphone (New 2021) - https://amzn.to/32741t6 Tripod - https://amzn.to/2XmXrwB Magic Arm Mount - https://amzn.to/3a0iP1K ************************************************** Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1 ************************************************** Instagram: https://www.instagram.com/redbeardops/ Twitter: https://twitter.com/RedBeardOps #redbeardops #knifemaking #workshop ********************************************************** A Notice from Red Beard Ops LLC: The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

Get the knife maker in your life something nice this year that they'll use all the time! This video was published before the holidays in 2021. ⭐ Items In Order of Cost: Kant Twist Clamp 1'' - https://amzn.to/332ygmu 2'' Kant Clamp - https://amzn.to/3FF45Tx 1-2-3 Blocks - https://amzn.to/2XC5PdO Calipers - https://amzn.to/2Z6EsUZ Checkering File - https://amzn.to/3bg2iER 3M Bluetooth Hearing Protection - https://amzn.to/38ock4U Resp-O-Rator - https://amzn.to/2M6PMN7 Bernzomatic TS8000 Torch - https://amzn.to/34d8vP6 MAPP Gas - https://amzn.to/3ec2Huc Pipe Vise - https://amzn.to/3vXVWVM File Guide - https://www.brianbump.com/fileguides/brucebump My 2x72 - http://www.northridgetool.com/grinders/ 🔸 Become a RBO Patron - https://www.patreon.com/RedBeardOps ⭐ DIY Builds: Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw 📹 Knife Builds: Crypto Knife - https://youtu.be/_Ph_LYE6Gcc Raindrop Kitchen Knife - https://youtu.be/qwGdKEtOhrk Battle Blade - https://youtu.be/LgT424a8_2M 📷 Camera Gear: Camera – Panasonic G7 – https://amzn.to/2SD8ekG Microphone – Takstar - https://amzn.to/36euYLP SD Card – 128GB - https://amzn.to/2tmVfZW Narration Microphone (New 2021) - https://amzn.to/32741t6 Tripod - https://amzn.to/2XmXrwB Magic Arm Mount - https://amzn.to/3a0iP1K ************************************************** Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1 ************************************************** Instagram: https://www.instagram.com/redbeardops/ Twitter: https://twitter.com/RedBeardOps 00:00 - Intro & Method 00:42 - Kant Twist Clamps 01:14 - 3-2-1 Blocks 01:45 - Digital Calipers 02:40 - Checkering File 03:09 - Bluetooth Hearing Protection 03:49 - Resp-O-Rator 04:44 - MAPP Gas Torch 05:24 - Pipe Vise 06:08 - File Guide 06:49 - 2x72 Belt Grinder #knifemaking #redbeardops #cybermonday ********************************************************** A Notice from Red Beard Ops LLC: The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

The mill was one of the best equipment related decisions I made for my knife making work shop. They truly are handy to have around and will increase the level of precision in your fit and finish greatly. This mill from Little Machine Shop is hands down the best choice when looking at the SIEG X2 mini mill category. ⭐ LMS 3990 Mill - https://littlemachineshop.com/3990?Source=RedBeard 🛠 Notable Additional Items: LMS Tramming Set (5585) - https://littlemachineshop.com/5585?Source=RedBeard LMS Belt Drive Kit (2560) - https://littlemachineshop.com/2560?Source=RedBeard LMS Air Spring Kit (2258) - https://littlemachineshop.com/2258?Source=RedBeard Face Mill - https://amzn.to/3uSqeII 1/2 roughing end mill - https://amzn.to/3DpzFTe 🔥 RBO Amazon Store - www.amazon.com/shop/redbeardops ⭐ Become a RBO Patron - https://www.patreon.com/RedBeardOps ⭐ DIY Builds: Homemade 30 Ton Press - https://youtu.be/q58iInuNtRY DIY Heat Treat Oven - https://youtu.be/7FalYyVASyw 📷 Camera Gear: Camera – Panasonic G7 – https://amzn.to/2SD8ekG Microphone – Takstar - https://amzn.to/36euYLP SD Card – 128GB - https://amzn.to/2tmVfZW Narration Microphone (New 2021) - https://amzn.to/32741t6 Tripod - https://amzn.to/2XmXrwB Magic Arm Mount - https://amzn.to/3a0iP1K ************************************************** Subscribe Here: https://www.youtube.com/channel/UC3kPIyZ5Rb8TQfWNk94kukQ?sub_confirmation=1 ************************************************** Instagram: https://www.instagram.com/redbeardops/ Twitter: https://twitter.com/RedBeardOps #knifemaking #redbeardops #minimill ********************************************************** A Notice from Red Beard Ops LLC: The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.