RCCarGarage

In this Video I install Brass wheels and Injora tires to the Ascent 18 to see if I really need alot of weight to climb the Boulder and the Outcome surprised me. Enjoy the Video and dont forget to hit that Like Button and Subscribe #redcat #traxxastrx4m #ascent18 #injora

I take the box stock Ascent 18 and a heavily Modified SCX24 Gladiator out to the Boulder to test how the Ascent would do Climbing the Boulder and All I can say is wow. Keep watching till the End when I test out the Ascent18's drag brake. And If you like the Content that Im doing on the Channel Hit that Like Button and Subscribe it helps out the Channel

Redcat has knocked it out of the park with this little guy check out the video and than go and pick up your very own ascent18

Finally the C74 Suzuki Jimny from WPL with the RES V3 is working like it should no more cutting out and I'll show you what I did. I want to give a huge shoutout to WPL for helping me out with this issue. These Links are affiliate Links that will help the channel WPL C74: https://www.wpl-rc.com/collections/c74?ref=RCCarGarage WPL RES V3: https://www.wpl-rc.com/collections/radio-receiver?ref=RCCarGarage WPL Winch: https://www.wpl-rc.com/products/winch?ref=RCCarGarage C74 wheel arches: https://www.wpl-rc.com/products/front-rear-fenders-for-c74?ref=RCCarGarage C74 Type B front and rear bumper: https://www.wpl-rc.com/products/front-and-rear-bumper-for-c74-type-b?ref=RCCarGarage URGENEX 7.4V 2S Lipo Battery: https://amzn.to/4bZ8wIM

In this video I installed the Capacitors on the WPL C74 Suzuki Jimny. I took it out for a test run it started off good but the fun didnt last too long. I have contacted WPL and they Replied check out the next video for their reply

In this Video I install the RES V3 to the WPL C74 Suzuki Jimny to get the Winch to work But the RES V3 had some different plans. Could it be something I did or could it be a defect check out the Video to see

WPL is working on an upgrade driveshaft kit for the 1/10 Suzuki Jimny and I have been helping them out with the driveshaft fix as you see in this Video. WPL is working hard on trying to get the driveline to work properly on this car and I can say that I am happy to be of assistance on helping them achieve this. I Hope that this video will be helpful to all that have gotten the 1/10 WPL Suzuki Jimny and for those that are considering getting one. If you want to get the parts that you saw on this video click on the links below 4x4 Metal driveshafts: https://www.wpl-rc.com/products/wpl-rc-drive-shaft?ref=RCCarGarage 34mm Inner Driveshaft: https://www.wpl-rc.com/products/34mm-inner-drive-shaft?ref=RCCarGarage WPL Winch: https://www.wpl-rc.com/products/winch?ref=RCCarGarage C74 Type B front and rear bumper: https://www.wpl-rc.com/products/front-and-rear-bumper-for-c74-type-b?ref=RCCarGarage C74 fender and side skirts: https://www.wpl-rc.com/products/front-rear-fenders-for-c74?ref=RCCarGarage WPL RES V3 all in one Radio ESC and Sound controller: https://www.wpl-rc.com/products/r-e-s-v3?ref=RCCarGarage

In this Video I Fix the driveshaft Binding problem and I add some 1.55 wheels

I Finally got my hands on the 1/18 Scale Chevrolet K10 By FMS and in the video I do a little Review and I take it out on the new "a work in progress" trail/crawl course to test it out and see what mods it needs so that this little guy can perform as good as the 1:1 K10 Square Body Enjoy the Video #FMS

We finally got the FMS Chevrolet K10 on the Channel. I took it out for a test run to see what upgrades are needed stay Tuned full Video coming out soon

Last WPL release of the year 2023. Please hold your moolah at other stores as this is not one but a multiple models release! 🔥🔥🔥 It will re"D"efine one of your favorite chassis. Stay tuned! 🙌 p/s : custom invoice for spouse is available for a low fee of $2.

Fulll Video on my YouTube Channel. In this Video I'm comparing both the trx4m and the scx24 they each have almost the same brass mods and im trying to see which does better

In this Video I compare the SCX24 Gladiator against the TRX4M Bronco. They Both have Brass Upgrades and a few other mods. Let me know in the Comment section which one do you think Did better. #injora #traxxastrx4m #axialscx24

I got Lucky to get my hands on the New Fully licensed Toyota FJ40 from FMS and this rig is an absolute Beauty. There is a full Interior and there is an option to change the suspension to leaf springs. This Rig performs very very good If you want to pick one up click on the Link Below https://www.fmshobby.com/products/fms-1-10-toyota-land-cruiser-fj40-rs or here from my affiliate Link: https://amzn.to/3QLmoy7

The Axial SCX24 Gladiator Finally gets an upgraded motor and I have got to say that this #injora 66t motor is absolutely great and its quiet and has great modulation. I also show the other upgrades that I did to the Gladiator and take it out to the mini crawl course to give it a test run.

I got lucky and got my hands on the new Fully Licensed Toyota FJ40 from FMS and this thing is an absolute Beauty. There is a full Interior in this thing and It just looks absolutely Scale and the way this performs is great. If you want to pick one up Click on the Link below https://www.fmshobby.com/products/fms-1-10-toyota-land-cruiser-fj40-rs

So this is the Last Video that I will be making of the Racent 1/24 Crawler. I have spent too much time modifying this rig so that it will be able to perform well. The SCX24 parts that I used are essential to be able to make this thing have a good turning angle to be able to go over certain obstacles. Well Hope I have given you all some good information on this little truck. Dont forget to Hit that Like Button and Subscribe. #scx24 #Racent

With the SCX24 axle stubs, the SCX24 servo and the brass wheels and Injora tires, this thing performed a lot better than it did out of the box bit with the crappy electronics the modulation is just not there. #injora #racent #scx24

There was a lot of time and testing to see if this was going to work. But in the end, everything fell perfectly into place and now the Racent 1/24 Jeep Finally has the steering angle that It should have come with out of the Box. There are some things I found out that will Disappoint a lot of people that are thinking of buying this truck or have already bought it. So enjoy the Video and don't forget to hit that Like Button and Subscribe

In this video I check out the Racent 1/24 scale crawler and I have to say that I was dissapointed in this rig as soon as I took it out of the box. This does have its issues but for $80 you can't expect scx24 quality and performance. I would not recommend this rig for a first-time mini crawler purchase. because It would disappoint people and they would get away from the Hobby. Hope you all Enjoy the Video and if you haven't yet take a little time and hit that Like Button and Subscribe to the Channel

I check out the scx24 copy and it doesn't look good full video out soon

An update on the mini crawler course its come a long way and there is more that is coming for it. Let me know what you all think