Homemade Body Armor Soft Armor (Level IIIA) - Part 2
Part 2 of our homemade body armor (soft armor). We previously tested some homemade soft body made from fiberglass welding blankets. It did not meet the NIJ Standards for Level IIIA. We take it a step further in this video and see how many layers are needed to stop a 9mm and .44 Mag.
The end conclusion is that although the diy body armor did stop the 9mm and .44 Mag, is not very practical.
Check out our line of professional grade body armor: https://www.predatorarmor.com/body-armor
#bodyarmor #homemadebodyarmor #DIYbodyarmor #predatorarmor
41
views
Malice Clips and How They Work
Malice clips are used to attach gear to your carrier or belt using the MOLLE/PALS system. We show you how to properly install malice clips. Great piece of gear to help you with your set up.
Available at: www.predatorarmor.com
13
views
Trauma Pad Test
Predator Armor Non-Ballistic Trauma Pads are an added layer that protects you from injuries caused by back face deformation. Trauma Pads dissipate the impact energy and reduce transmitted force.
Our Trauma Pads are engineered to provide comfort when wearing our body armor panels. The materials are high-density and flexible-- making it able to reduce blunt force trauma by absorbing the impact energy.
Available at: https://www.predatorarmor.com/accessories
4
views
Trauma Pad
Predator Armor Non-Ballistic Trauma Pads are an added layer that protects you from injuries caused by back face deformation and blunt force trauma. Trauma Pads dissipate the impact energy and reduce transmitted force.
Our Trauma Pads are engineered to provide comfort when wearing our body armor panels. The materials are high density and flexible-- making it able to reduce blunt force trauma by absorbing the impact energy.
Predator Armor Trauma Pads work perfectly in tandem with our Level IIIA, Level III, and Level III+ Armor to increase comfort and reduce blunt force.
Available at: https://www.predatorarmor.com/accessories
4
views
Santa Trusts Predator Armor
Santa trusts Predator Armor to keep him safe. You should too!
Get your gear today: www.predatorarmor.com
2
views
Torture Testing Level III+ Armor (M193 vs Level III+)
Predator Armor Level III+ body armor torture test continues. Today the Level III+ plate is tested against M193 55 grain 5.56 shot out of a 20" barrel. The AR650 steel used in the Level III+ armor is made to stop higher velocity rounds.
Get yourself armor today at: https://www.predatorarmor.com/body-armor
7
views
Minuteman Plate Carrier
The Minuteman Plate Carrier is the perfect minimalist plate carrier. Designed to carry 10"X12" plates. There are six rows of MOLLE/PALS style webbing with built in matching loop material on the top three rows for the option of attaching patches or other items. Made one size to fit most, the shoulder and waist straps are adjustable, providing a snug fit. It also has removable mesh shoulder pads providing comfort while wearing. The inside of the carrier is mesh providing more breathability and comfort.
While being a minimalist carrier there is no sacrifice on quality and performance. Constructed from mil-spec material it is made to withstand whatever use you throw its way.
Features:
- 500D Cordura material
- Mesh lined for comfort and ventilation
- Removable, padded mesh shoulder pads
- Hook-and-loop webbing on front and back
- Drag handle
- Adjustable shoulder straps and waist
- Quick release buckles on shoulders and waist
- Designed for 10"X12" plates
- 100% Made in the USA
Available at: www.predatorarmor.com
27
views
Triple Mag Pouch
Predator Armor 5.56 Quick Draw Triple Mag Pouch has a laser cut molle front and back with Kydex inserts. These pouches have strong retention so you will not lose you mags in action. While having strong retention, they allow for a quick draw speed reload. You can easily pull the mag out for a quick reload, with no cumbersome cords or velcro.
The laser cut molle allows it to connect to any MOLLE/PALS platform, such as plate carriers, battle belts, etc. Designed to hold up to three 30 round 5.56 magazines. Made from 1000D cordura. 100% Made in the USA.
Features:
- Kydex Inserts
- Strong Retention
- Quick Draw (no velcro or bungies)
- Made from 1000D Cordura
- 100% Made in the USA
Available today: https://www.predatorarmor.com/product-page/5-56-quick-draw-triple-mag-pouch
72
views
Dump Pouch - Predator Armor
The Dump Pouch is a great accessory for your kit. If you need a place for your spent mags or other items then the folding dump pouch is perfect for your needs. It folds up to so it does not consume valuable MOLLE channels or belt space. At approximately 3" x 3" x 2" it will take up minimal space. When unrolled it is large enough to hold 9 AR mags or similar sized items.
Made from 1000D cordura it is built to last. Laser cut MOLLE on the back allows attachment with your MOLLE/PALS system. It is also belt compatible so you can attach if you don't have a MOLLE/PALS set up. Bungee cord lock at top for closure, securing your gear inside.
Backed by our Lifetime Warranty. 100% Made in the USA.
Available on our website: https://www.predatorarmor.com/product-page/dump-pouch
32
views
Utility Pouch - Predator Armor
The Predator Armor Utility Pouch is the perfect size and made to last. Constructed from 1000D Cordura the utility pouch is 6.5"x 3"x 5" and weighs 3.4 oz. With an inner pocket it allows you to keep separated and carry all of your general items you need. It is MOLLE and Belt compatible with a tactical zipper to keep your items safe. As always it is 100% made in the USA.
Features:
- 1000D Cordura Construction
- Minimal Space Requirement (6.5" x 3" x 5")
- Pocket Sleeve for item separation
- MOLLE and Belt compatible
- Made in the USA
Get yours today: https://www.predatorarmor.com/product-page/general-pouch
39
views
Level III+ Body Armor
Predator Armor Level III+ Body Armor is manufactured in the U.S. using ballistic grade AR650 steel and has the option for a kevlar lined spall and fragmentation protective layer. Our plates use a unique heat-treating, quenching and tempering process that results in an extra hardened steel. Predator Armor plates are lightweight, impact-resistant steel that hold superior ballistic properties. This allows us to use thinner plates without sacrificing protection levels.
All of our plates come with a base coat that aesthetically enhances the plate as well as provides durable characteristics. This coating does not provide fragmentation mitigation. You have the option to add kevlar lining to your plate. This provides anti spall and frag characteristics. It also enhances the performance of your plate. If your carrier does not have anti frag characteristics it is strongly advised to include the kevlar lining.
22
views
Level III Body Armor Plate Test - Predator Armor
Predator Armor level III body armor plates. Our level III plates are tested against multiple calibers of rifles: .223, 5.56, 300 Blackout, .308, and .30-06. The results speak for themselves. Predator Armor plates test above the NIJ Standards.
Plates available today at: www.predatorarmor.com
17
views
Homemade Body Armor (Soft Armor)
We wanted to make homemade soft body armor with materials you can get from your local hardware store. We discuss the construction of the body armor and will then test it against the NIJ Standards. We test the armor up against a ballistic clay box to test not only pass throughs but also back face deformation.
If you want non-homemade armor that gives you the best value in armor protection then check out our website: www.predatorarmor.com
#bodyarmor #homemadebodyarmor #DIYbodyarmor #predatorarmor
18
views
300 Win Mag vs Body Armor
Does Predator Armor Level III+ plate stop a 300 Win Mag? Today we find out on 300 Win Mag vs Body Armor. I don't think the results will disappoint those looking for some high quality body armor.
#bodyarmor #predatarmor #300winmag #shooting
You can get yourself these plates today at: https://www.predatorarmor.com/body-armor
36
views
Level III Body Armor - Predator Armor
Predator Armor Level III Body Armor. These body armor plates are tested to NIJ Level III standards. The plates are 10x12 and 1/4" thick. You can get them in base coat or kevlar wrapped. Made 100% in the USA.
Predator Armor Level III Body Armor is manufactured in the U.S. using ballistic-grade steel and has the option for a Kevlar-lined spall and fragmentation containment layer. Our process utilizes a unique heat-treating, quenching and tempering process that results in an extra-hardened steel plate. Predator Armor plates are lightweight, impact-resistant and hold superior ballistic properties. This allows us to provide thinner plates without sacrificing any level of protection.
All of our plates come with a base coat that aesthetically enhances the plate and provides durable characteristics. This coating does not provide fragmentation mitigation. All plates have the option to add a Kevlar lining, which provides fragmentation and spalling containment and even enhances the performance of the armor. If your carrier or plate does not have anti-fragmentation characteristics, we strongly advise including the Kevlar lining.
Get yours today: https://www.predatorarmor.com/body-armor
31
views
Predator Armor's Sag Bag
Get yours today at: https://www.predatorarmor.com/product-page/sag-bag-drop-pouch
The Sag Bag provides you maximum versatility with your gear, providing a solution to carry additional supplies below your plate carrier or chest rig. This is a multifunctional pouch that can act as a dangler, utility pouch, or fanny pack. It is a hanger pouch that can be mounted either under the front flap and cummerbund, or inserted into your plate pocket on most carriers. This style of hanger pouch is compatible with almost any plate carrier or chest rig that has loop Velcro on the front and most plate pockets. It is a lightweight, durable, and convenient way to help you carry the tools that you need for the job.
Features:
- 500D Cordura Construction
- Can be mounted under the front flap and cummerbund or inserted into the plate pocket on most carriers
- Compatible with most plate carriers that have loop closure flaps or cummerbunds, or Velcro plate pockets.
- Compatible with chest rigs that utilize hook and loop placards.
- 4" woven elastic retainer on bottom for tourniquet
- Convertible to a fanny pack
- Two zippers pockets
67
views
50 BMG vs Body Armor
Body armor can't stop a 50 BMG, right? Right? We shoot the Predator Armor Level III+ body armor with a 50 BMG to see what it will do. This is the most common comment we see. So we thought we would finally give you an answer. Check it out and see what happens.
Get your armor today at: https://www.predatorarmor.com/body-armor
#predatorarmor #50bmg #bodyarmor #tacticalgear
57
views
Bulletproof Backpack Test
We turn a standard backpack into a bulletproof backpack with the help of Predator Armor's Level IIIA Backpack Armor.
Predator Armor's Level IIIA Backpack Armor is the perfect option for protection wherever you go. Designed to fit into the laptop compartment of most backpacks or main pocket of a purse, laptop bag, briefcase, this soft armor panel is lightweight and flexible, making it comfortable to carry with you on the go. This panel allows you to turn most backpacks into a bulletproof backpack.
Our Backpack Armor has been tested by an independent NIJ credentialed laboratory to certify that it meets NIJ level IIIA specifications; it will stop .357 SIG FMJ, as well as .44 MAG SJHP. The panel has an ultra-slim and flexible profile without giving up any stopping capability. The Hybrid Kevlar system used in Predator Armor's Backpack Armor is unmatched within the Soft Armor industry, providing top-rated stopping ability while still remaining thin, durable and comfortable.
Predator Armor's Backpack Insert has a low-profile, allowing you to use it in discrete environments. With all of our products made 100% in the USA, you never have to fear the quality or effectiveness of Predator Armor.
https://www.predatorarmor.com/product-page/backpack-armor-level-iiia
#bodyarmor #backpackarmor #bulletproof #bulletproofbackpack #softarmor
31
views
UHMWPE Armor
Predator Armor Level III Lightweight Body Armor is manufactured in the U.S. The plate is made of polyethylene. At only 3.5 pounds, this Level III armor provides you with rife-rated protection at half the weight of steel and ceramic plates. The plates are also designed to be buoyant and float in water. The lightweight, multicurve design provides maximum comfort and mobility for any conditions. Predator Armor's Level III Poly Plate is notably thinner than the competition, at only 0.8" thick.
Polyethylene plates do not have issues with spalling or fragmentation like other body armor variants, as the materials naturally contain any ricochet projectiles caused by a bullet striking the plate. Poly plates are made by pressing multiple layers of ultra-high-molecular-weight-polyethylene (UHMWPE) material under extreme pressure and heat, which bonds the multiple layers of polyethylene materials together and hardens to provide the ultimate protection for the weight. A bullet traveling at high velocity will be captured in the hardened material, partially melting the polyethylene and allowing it to travel slightly into the plate itself. It will then be stopped by the remaining layers and become captured in the UHMWPE material.
Predator Armor's Lightweight Level III Body Armor also includes a polyurea coating that provides protection from the elements. It protects the armor from water, UV light, as well as wear-and-tear from extended use. As with all Predator Armor products, this UHMWPE plate is created with the end user in mind and made 100% in the USA.
30
views
Body Armor Test - Level III Poly Plate
Predator Armor's lightweight body armor with rifle-rated protection. Our Level III lightweight plate is perfect for someone looking to minimize weight and maximize mobility. Made from UHMWPE material it weighs just 3.5 lbs. and is only 0.8" thick, the plate is thinner than most poly plates on the market. Each plate has a multicurve form to improve comfort and enhance mobility.
The plate is rated as Level III. It meets and exceeds the NIJ Level III Standards. It will stop 7.62x51 (M80 Ball) and also higher velocity 5.56 rounds (M193). As with all of Predator Armor products it is 100% made in the USA.
#predatorarmor #bodyarmor #tacticalgear
Available at: www.predatorarmor.com
21
views
Myths of Body Armor - Don't Buy Anything But Level IV Body Armor
We dispel the many myths of body armor. Today we review the topic that Level IV body armor is the only armor that you should buy. Everything else is a waste of money.
This is false. There are lots of pros and cons to different types of armor. You should determine what type of armor fits your situation and needs. Body armor is not a one size fits all solution.
#bodyarmor #predatorarmor #tactical #tacticalgear
www.predatorarmor.com
35
views
Santa Trust Predator Armor
Santa trusts Predator Armor to keep him safe during his Holiday deliveries. You can trust it too.
www.predatorarmor.com
7
views
Backpack Armor - Predator Armor
Predator Armor's Level IIIA Backpack Armor is the perfect option for protection wherever you go. Designed to fit into the main pocket of a purse, laptop bag, briefcase, and the laptop compartment of most backpacks. The soft armor panel is lightweight and flexible making it comfortable to carry with you.
Our Backpack Armor has been tested by an independent NIJ credentialed laboratory to certify that it meets NIJ level IIIA specifications, which states that it will stop .357 SIG FMJ, as well as .44 MAG SJHP. This Level IIIA Backpack Panel has an ultra slim and flexible profile without giving up any stopping capability. The Hybrid Kevlar system used in Predator Armors Backpack Armor is unmatched within the Soft Armor industry, providing top rated stopping ability while still remaining thin, durable and comfortable.
Predator Armor's Backpack Insert has a low-profile allowing you to use it in discrete environments. With all of our products made 100% in the USA, you never have to fear on quality and effectiveness of Predator Armor.
Get yours now: https://www.predatorarmor.com/product-page/backpack-armor-level-iiia
23
views
Concealable Plate Carrier - Low visibility - Predator Armor
The Concealable Plate Carrier is the lightest and lowest profile carrier that we have available. It is designed to be just that, concealable. Lightweight (weighing less than 10 oz), low profile, and comfortable. It can be worn under button up shirts, jackets, and similar articles of clothing. It is built for low visibility and concealment. It is your extreme low vis carrier. It is designed specifically for our Level IIIA Soft Armor, but it can fit any standard 10"x12" plate.
Made of a nylon and spandex blend it is comfortable and breathable. It also allows it to have a stretch to it so it can better contour and fit your body. It includes elastic cummerbund straps that fit around your sides for a tight fit and provide adjustment. The shoulder straps are adjustable to make sure it fits you.
Get yours today: https://www.predatorarmor.com/product-page/level-iiia-concealable-plate-carrier-package
Check out the rest of our gear: www.predatorarmor.com
15
views
Predator Armor - The Prepared Have Nothing To Fear
Predator Armor provides top quality USA made gear to those who need it; whether military, first responder, or prepared citizen. The prepared have nothing to fear.
Get your gear today: www.predatorarmor.com
3
views