Murtazaqadri

Alright, This Bow took me one month to make and this was not easy to make it such perfect. A lot of my Fans asked me to make Bow so i tried to make most perfect Bow that i can. Overall Length: 40 Inches Handle Length: 10 Inches Stretched Length: 35 Inches All the Processes are below of making this beautiful Bow: Forging: It took me almost two days to prepare and hand forge Leaf Spring piece into a long Steel Strip and this was my most complicated forging ever. I don't have any serious equipment so all the forging as well as hot metal bending i did with my hands and turned a spring piece into an 40 inches metal strip. Grinding: I make most of grindings of bent strip with my Angle grinder and turned the strip into a well shaped workpiece. I also did a lot of hand sanding with a help of abrasive to remove the edges and almost all the roughness of the blank. v. I made grooves on Limbs with the help of round file. v. Hand Sanded the surface to remove roughness. v. The recurve made on special device which delivers energy more efficiently. Hardness: There is a professional way to harden a Bow and that is Heating the whole surface placed into a Fire evenly to a critical temperature. After that Quench the heated detail in oil. Now the Steel is hard but Fragile. Tempering is the best way to increase Toughness of the bow. Bowstring: This piece may be made of any fiber twisted into a single cord but we can also make it by use synthetic winding around linen thread. The purpose of bowstring is to join the two ends and launch the arrow. Handle: The Handle contains of three parts. v. LEATHER: Purpose of leather is to hold the handle with the steel part , I used soft leather for wrapping. v. Copper: Thin metal strips of copper turned into a beautiful decoration that separates the handle and curve. v. Wood: A piece of oak wood is nice for the handle which could be fixed with some leather strips.