LouisianaTractorworks

I tilled the garden area again and wanted to try the row hipper on the Massey subcompact tractor. Trying different settings to get it to work with a slower travel speed.

A backhoe thumb can add so much use to your backhoe.

Your fuel injectors and rail should not look like this. All plugged up and a lot of trash plugging the rail.

I go through every step to replace fuel injectors on a Chevy 1500 4.8 liter. Removing all the components. Cleaning the fuel rails. Putting all the components back together and reinstalling everything on the motor. Then running to check that everything is working properly. The injectors are remand from Precision Auto Injectors! Music 1 songs Intoxicated Black Atlass Infinite (Deluxe)

I needed something to make rows in my garden. My tractor dealer hooked me up with a row hipper, BUT what is a Row Hipper? And how does it work? I couldn't find much info on the web about one, so we will learn together in this video.

When digging stumps you never know just how big roots can get.

The timing chain on my Chevy 350 5.7L was stretched out, so I replaced it.

Had both rear wheel cylinders was leaking. Changed them and the brake shoes on both sides. The tire that came on the truck was to big, so I added wheel spacers to keep them from rubbing.

Prepping garden with the Woods RTR 48.30 reverse tiller on my Massey GC 1710

We prepped a 5.7L motor to install in a 91 Chevy 3500 one ton flatbed truck. I changed the oil pump, and the timing chain before installing.

We pulled the 5.7L out of my 1993 Chevy 1500 pickup truck, to put it in my 1991 Chevy one ton 3500. https://youtu.be/rlRNUrInZ_w?si=EvcqPbWTbLxPwGAl

We pulled the 5.7L out of my 1993 Chevy 1500 pickup truck, to put it in my 1991 Chevy one ton 3500.

I picked up some new toys for the Massey GC & the TYM T474 tractors. I needed these implements for a job. I went to South Side Tractors where I got a great deal on them and took a look at all the tractors and implements they have there. I also got a close up look at the Bad Boy tractors for the first time as well.

My 16-foot car hauler's axle got bent and blew out both wheel bearings on the one side. No saving it, so I changed the axle.

We diagnose a lack of fuel on our 2001 chevy truck. Finding the problem was the fuel pump. We set out to fix it. You will see how to disconnect the fuel tank and remove the old pump. Reinstall a new one and put the fuel tank back in the truck with minimal tools. Music 1 songs The Colonel Zachariah Hickman The Colonel

A ball joint broke on my son's Mercury. I bought a ball joint pressing tool. This tool press allows you to press out the old ones and press in the new ball joints while the control arms remain on the car. Saving a lot of time and hard work.

The Massey was pushed to it's limits digging up this stump.

The wife did a great job moving that 18 foot long grow bed for her first time ever do it.

BXpanded's Piranha tooth bar makes a big difference in digging with a subcompact tractor

Digging up stumps with a Massey GC 1710 backhoe

This video is a walk through as the shed progressed from studs to sheet rock, wood walls, cabinets/counter tops, and flooring. Part six of this build is here: https://rumble.com/v3gfbn6-september-9-2023.html Part four of this build is here: https://rumble.com/v3gbo3o-building-exterior-laundry-room-and-interior-design-changes-for-this-shed-to.html This is a 16' X 44' building that we are going to try and turn into to a home for a friend of mine, in these series of videos. After he lost his house from hurricane Laura. This was the only option he had to get a home for him to live in. #LTPVids #Tinyhouse #ShedtoHome

In this video we build the exterior laundry room and I go over the interior. Where it's at and the changes we are making to fit the budget. Part five of this build is here: https://rumble.com/v3ge7yj-going-from-a-shed-to-a-house-a-walk-through-from-studs-to-float-flooring.html Part three of this build is here: https://rumble.com/v3f90np-framing-inside-walls-to-convert-a-shed-into-a-house.html This is a 16' X 44' building that we are going to try and turn into to a home for a friend of mine, in these series of videos. After he lost his house from hurricane Laura. This was the only option he had to get a home for him to live in. #LTPVids #Tinyhouse #ShedtoHome

He lost his house from hurricane Laura. Three years without a home, we were able to convert this shed he bought into his new home. Part five of this build is here: https://rumble.com/v3gfbn6-september-9-2023.html This is a 16' X 44' building that we are going to try and turn into to a home for a friend of mine, in these series of videos. After he lost his house from hurricane Laura. This was the only option he had to get a home for him to live in. #LTPVids #Tinyhouse #ShedtoHome

In this video we lay out for the plywood to reinforce the thin OSB floor with CB 23/32 and install blocking to frame up walls. Part three of this build is here: https://rumble.com/v3f90np-framing-inside-walls-to-convert-a-shed-into-a-house.html Part one of this build is here: https://rumble.com/v3brtma-august-25-2023.html This is a 16' X 44' building that we are going to try and turn into to a home for a friend of mine, in these series of videos. After he lost his house from hurricane Laura. This was the only option he had to get a home for him to live in. #LTPVids #Tinyhouse #ShedtoHome

In this video we lay out and frame in the walls for the bedroom & bath. Part four of this build is here: https://rumble.com/v3gbo3o-building-exterior-laundry-room-and-interior-design-changes-for-this-shed-to.html Part two of this build is here: https://rumble.com/v3don3s-reinforcing-floors-with-plywood-to-make-a-shed-into-a-tiny-home.html This is a 16' X 44' building that we are going to try and turn into to a home for a friend of mine, in these series of videos. After he lost his house from hurricane Laura. This was the only option he had to get a home for him to live in. #LTPVids #Tinyhouse #ShedtoHome