Bayer Monsanto foreign company
We are in an Information war right now.
Spread these videos far and wide.
Toresays.com
https://precinctstrategy.com/state-information/
To anyone who reads this. All around the world people have to start getting involved in their local elections. Go volunteer at your local precinct(link above^^).
Get involved in school boards. We have to take this country back. Every one has to get involved. Go volunteer. Go run for something. Make calls. Start calling/emailing/write letters to your mayors, governors, ags, sos.
Call your congressmen, senators, and state legislators. Anyway you can help, Help. Even the calls/emails/letters will help. Let your voices be heard. Calls, emails, letters, volunteering to help with local elections, running for office. Anyone and
everyone can get involved.
https://www.naag.org/find-my-ag/
Find your ag (attorney General) and write, and call them.
Get these Videos out. Send them to people.
For Educational purposes. We are in an information war. Pump this stuff out.
Under the Copyright Act, the fair use of copyrighted material without permission is allowed when used for the following purposes: Criticism; Comment; News reporting; Teaching, includes making copies for use in the classroom;
Scholarship and research;
Parody.
Fair use permits a party to use a copyrighted work without the copyright owner’s permission for purposes such as criticism, comment, news reporting, teaching, scholarship, or research
15
views
Nothing is Hidden
We are in an Information war right now.
Spread these videos far and wide.
Toresays.com
https://precinctstrategy.com/state-information/
To anyone who reads this. All around the world people have to start getting involved in their local elections. Go volunteer at your local precinct(link above^^).
Get involved in school boards. We have to take this country back. Every one has to get involved. Go volunteer. Go run for something. Make calls. Start calling/emailing/write letters to your mayors, governors, ags, sos.
Call your congressmen, senators, and state legislators. Anyway you can help, Help. Even the calls/emails/letters will help. Let your voices be heard. Calls, emails, letters, volunteering to help with local elections, running for office. Anyone and
everyone can get involved.
https://www.naag.org/find-my-ag/
Find your ag (attorney General) and write, and call them.
Get these Videos out. Send them to people.
For Educational purposes. We are in an information war. Pump this stuff out.
Under the Copyright Act, the fair use of copyrighted material without permission is allowed when used for the following purposes: Criticism; Comment; News reporting; Teaching, includes making copies for use in the classroom;
Scholarship and research;
Parody.
Fair use permits a party to use a copyrighted work without the copyright owner’s permission for purposes such as criticism, comment, news reporting, teaching, scholarship, or research
Vending Machine Electrical issues?
Make sure to check your ground wires if you are having electrical issues.
#vendingmachine #vending #vendinghowto #vendingmachinemaintenance #vendingmachinehack #hackvendingmachine
#vendingmachinebusiness #howto
#howtovendingmachine
#vendingmachonecoolingissue #vendingmachinefreon
#dixienarco
#snackshop
13
views
Cooling Issues with your Vending Machine? This is what the thermostat looks like
If your Machine starts to have cooling issues it could be a variety of things. Start with a check list.
1. Make sure any vending machine that has a compressor is at least a few feet away from the wall. having it against the wall will not allow the vending machine to breath.
2. Clean the compressor and any screens and or the fins of the compressor. having them clogged with dust and debree will eventually create a problem.
3. Make sure you do not have a freon leak. This is not diy and a professional will be needed. If it is low on freon call a professional.
4. Check your thermostat, these do eventually go bad. You might need a new one.
5. Check the seals on the door. They get old.
#vendingmachine #vending #vendinghowto #vendingmachinemaintenance #vendingmachinehack #hackvendingmachine
#vendingmachinebusiness #howto
#howtovendingmachine
#vendingmachonecoolingissue #vendingmachinefreon
#dixienarco
#snackshop
12
views
Dollar Bill Validator Cleaning Wipes
How to use a Cleaning Wipe for a dollar bill validator
#vendingmachine #vending #vendinghowto #vendingmachinemaintenance #vendingmachinehack #hackvendingmachine
#vendingmachinebusiness #howto
#howtovendingmachine
#vendingmachonecoolingissue #vendingmachinefreon
#dixienarco
#snackshop
Vending Machine HACK. Myth or Real?
In this video I show you why the coin with a string will not work on a vending machine.
The Coin Mech has a safety feature. When the coin drops into the mech it can not come back out of the top of the coin mech. Rendering this hack a big fat DUD
#vendingmachine #vending #vendinghowto #vendingmachinemaintenance #vendingmachinehack #hackvendingmachine
#vendingmachinebusiness #howto
#howtovendingmachine
How to set the prices on a Snackshop 6600 Automatic Products Vending Machine
How to set the price on a Snackshop 6600 Vending machine
#vendingmachine #vending #vendinghowto #vendingmachinemaintenance #vendingmachinehack #hackvendingmachine
#vendingmachinebusiness #howto
#howtovendingmachine
#vendingmachonecoolingissue #vendingmachinefreon
#dixienarco
#snackshop
Dixie Narco 501e Live Display Price Change how to
How to change the prices on a Dixie Narco 501e Live Display.
#vendingmachine #vending #vendingmachinebusiness #dixienarco #howtovending #vendinghowto
4
views
How to Re string a Craftsman Weed Eater Weed Whacker Gas 30 cc in 60 seconds
In this Video I will show you how to re string a craftsman 30cc weed eater
20
views
Cedarwood Trails Flooding
This is what happens with just a light rain. adding to YouTube so everyone is aware before they move in. Cedarwood Trails Fort Wayne Indiana
19
views
1
comment
Collecting $300+ in Change from Vending Location Beast
In todays Video we will be collecting from 1 location. At the end of the video I turn in 2 months of change from 3 locations.
Thank you for the support. It is appreciated.
any feedback is welcome.
vending machine tiktok vending hack tiktok vending machine hack #vendingmachinehack vending machine hack #vendingmachinebusiness vending machine business #vendingmachinecollection vending machine collection #collectingfromvendingmachine #snackvendingmachine
#usivendingmachine #vendovendingmachine #vendo #dixienarco #beavervending #collectingvendingmachine
#hacksforvendingmachine
#howtostartavendingbusiness #vending
tiktokvendinghack
You can hit me up on my website 👇
https://krome606.wixsite.com/website
You can follow me on Instagram @Vendinomicsllc
If you want free money click the link below👇
https://join.robinhood.com/kevinr2387
https://act.webull.com/i/sFLv4fsfABKa/q35/wb_deposit_us_01
☝️ With those two apps I have learned how to invest in stocks and used the money I made as a start up for a Vending machine business. Use my Link and we will both get a free stock on Robinhood or on Webull we will get 2 free stocks!
26
views
Changing Vending Machine Motor Cogs from 4 deep to 2 deep. Must SEE! Vending Maintenance
In todays Video we will be showing you how to sucessfully change the Vending Machine Vend Motors from being set 4 deep to 2 deep. It is simple yet most people probably don't know how to do this.
Thank you for watching.
Thank you for the support. It is appreciated.
any feedback is welcome.
vending machine tiktok vending hack tiktok vending machine hack #vendingmachinehack vending machine hack #vendingmachinebusiness vending machine business #vendingmachinecollection vending machine collection #collectingfromvendingmachine #snackvendingmachine
#usivendingmachine #vendovendingmachine #vendo #dixienarco #beavervending #collectingvendingmachine
#hacksforvendingmachine
#howtostartavendingbusiness #vending
tiktokvendinghack
You can hit me up on my website 👇
https://krome606.wixsite.com/website
You can follow me on Instagram @Vendinomicsllc
If you want free money click the link below👇
https://join.robinhood.com/kevinr2387
https://act.webull.com/i/sFLv4fsfABKa/q35/wb_deposit_us_01
☝️ With those two apps I have learned how to invest in stocks and used the money I made as a start up for a Vending machine business. Use my Link and we will both get a free stock on Robinhood or on Webull we will get 2 free stocks!
24
views
Getting a new Vending Machine Location Ready
In todays video I get a new location ready. I had to put in a new outlet and run the romex to the circuit breaker box
Thank you for the support. It is appreciated.
any feedback is welcome.
vending machine tiktok vending hack tiktok vending machine hack #vendingmachinehack vending machine hack #vendingmachinebusiness vending machine business #vendingmachinecollection vending machine collection #collectingfromvendingmachine #snackvendingmachine
#usivendingmachine #vendovendingmachine #vendo #dixienarco #beavervending #collectingvendingmachine
#hacksforvendingmachine
#howtostartavendingbusiness #vending
tiktokvendinghack
You can hit me up on my website 👇
https://krome606.wixsite.com/website
You can follow me on Instagram @Vendinomicsllc
If you want free money click the link below👇
https://join.robinhood.com/kevinr2387
https://act.webull.com/i/sFLv4fsfABKa/q35/wb_deposit_us_01
☝️ With those two apps I have learned how to invest in stocks and used the money I made as a start up for a Vending machine business. Use my Link and we will both get a free stock on Robinhood or on Webull we will get 2 free stocks!
33
views
2005 Chevrolet Trailblazer Sway Bar Link Change out 2002-2009
In this Video we will be changing out the Sway Bar Linkage on a 2005 Chevrolet Trailblazer
Sway bar link replacement. Learn how to replace the sway bar end links aka drop links, on a Chevy Trailblazer, GMC Envoy, Buick Rainier, Saab 9-7X, Oldsmobile Bravada, Isuzu Ascender. The stabilizer links we installed are greasable which is not common.
36
views
Craftsman 42 cc 16" and 18" chainsaw REVIEW MUST SEE! HOW TO
In todays video I am reviewing two brand new Craftsman 42cc 16" and 18" Chainsaws.
Please always remember Proper PPE. Personal Protective Equipment. Saftey glasses, or face shield, hearing protection, gloves, no dangling jewelry or loose fitting clothes, proper foot protection.
My friend had a tree removal job. So we decided to put these two Craftsman 16" & 18" 42cc Chainsaws, to the test. Overall they got the job done, but not without a bunch of down time.
Remember to READ the instructions, use Bar & Chain oil, Use the proper mix of gas, and have the chain tight enough so it doesn't pop off.
Both the 16" and 18" had troubles going through bigger trees. When I say bigger, I mean bigger for the job. The trees themselves weren't that big.
In my opinion if you are on a budget these will work. If you have the money, invest in a better model because these don't seem like they will last long.
Thank you for watching my Craftsman Chainsaw 16" & 18" 42cc Review. I appreciate the support for watching my Craftsman Chainsaw 16" & 18" 42cc
You can hit me up on my website 👇
https://krome606.wixsite.com/website
You can follow me on Instagram @Vendinomicsllc
If you want free money click the link below👇
https://join.robinhood.com/kevinr2387
https://act.webull.com/i/sFLv4fsfABKa/q35/wb_deposit_us_01
☝️ With those two apps I have learned how to invest in stocks and used the money I made as a start up for a Vending machine business. Use my Link and we will both get a free stock on Robinhood or on Webull we will get 2 free stocks!
73
views
3
comments
How to Change Fix a Flat Tire
In this video we show you how to take off and put on a tire. Be safe and aware at all times.
APPLY WHEEL WEDGES
Wheel wedges go in front of or behind the tires to further ensure the vehicle doesn’t roll while you fix the flat tire. If you’re changing a rear tire, place these in front of the front tires. If your flat tire is at the front, put the wheel wedges behind the rear tires.
Bricks or large stones will work just as well as “real” wheel wedges. Just be sure they’re large enough to stop the car from rolling.
REMOVE THE HUBCAP OR WHEEL COVER
If your vehicle has a hubcap covering the lug nuts, it’s easier to remove the hubcap before lifting the vehicle with the jack. If your lug nuts are exposed, you can skip ahead
Use the flat end of your lug wrench to remove the hubcap. This will work for most vehicles, but some hubcaps need a different tool to come off. Consult your owner’s manual for proper hubcap or wheel cover removal procedures.
LOOSEN THE LUG NUTS
Using the lug wrench or impact driver, turn the lug nuts counterclockwise until you break their resistance. You may have to use force, and that’s ok. Use your foot or all of your body weight if necessary.
Loosen the lug nuts about ¼ to ½ of a turn, but don’t remove them completely yet. Save that for when it’s time to remove your tire/wheel from the vehicle.
PLACE THE JACK UNDER THE VEHICLE
The right place for the jack is usually beneath the vehicle frame alongside the tire that’s flat. Many vehicle frames have molded plastic on the bottom with a cleared area of exposed metal specifically for the jack. To safely lift and avoid damage to the vehicle, follow the instructions for jack placement in your vehicle owner’s manual.
RAISE THE VEHICLE WITH THE JACK
To prevent the jack from settling under the weight of your vehicle and coming off balance, place a small cut of 2x6” wood beneath it before attempting to raise your vehicle. This tactic is especially helpful on asphalt.
With the jack properly positioned, raise the vehicle until the flat tire is about six inches above the ground.
Never put any part of your body under the vehicle during or after raising the vehicle with the jack.
UNSCREW THE LUG NUTS
Now it’s time to remove the lug nuts all the way. Since you've already loosened them, you should be able to unscrew them mostly by hand.
REMOVE THE FLAT TIRE
Gripping the tire by the treads, pull it gently toward you until it’s completely free from the hub behind it. Set it on its side so that it doesn’t roll away.
MOUNT THE NEW TIRE ON THE LUG BOLTS
Now place the spare on the hub by lining up the rim with the lug bolts. Push gently until the lug bolts show through the rim.
TIGHTEN THE LUG NUTS BY HAND
Put the lug nuts back on the lug bolts and tighten them all the way by hand. Once they are all on, check each one again, tightening as much as possible. You will tighten them with the wrench after lowering the vehicle to the ground.
LOWER THE VEHICLE AND TIGHTEN THE LUG NUTS AGAIN
Use the jack to lower the vehicle so that the new tire is resting on the ground but the full weight of the vehicle isn’t fully on the tire. At this point, you should tighten the lug nuts with the wrench, turning clockwise, as much as you can. Push down on the lug wrench with the full weight of your body.
LOWER THE VEHICLE COMPLETELY
Bring the vehicle all the way to the ground and remove the jack. Give the lug nuts another pull with the wrench to ensure they’re as tight as possible.
REPLACE THE HUBCAP
If the hubcap you took from the old tire will fit your spare, put it in place the same way you removed it initially. If it doesn’t fit, stow it away with the tire when you stow your equipment.
CHECK THE PRESSURE IN THE SPARE TIRE
You should check the tire pressure of the new tire to make sure that it is safe to drive on. If the tire needs pressure, drive (slowly) to a service station immediately.
You can hit me up on my website 👇
https://krome606.wixsite.com/website
You can follow me on Instagram @Vendinomicsllc
If you want free money click the link below👇
https://join.robinhood.com/kevinr2387
https://act.webull.com/i/sFLv4fsfABKa/q35/wb_deposit_us_01
☝️ With those two apps I have learned how to invest in stocks and used the money I made as a start up for a Vending machine business. Use my Link and we will both get a free stock on Robinhood or on Webull we will get 2 free stocks!
259
views
2
comments
How to change prices on Vendo v540 Soda Vending Machine
In todays video I show you how to set the prices on a Vendo v540
Thank you for the support. It is appreciated.
any feedback is welcome.
vending machine tiktok vending hack tiktok vending machine hack #vendingmachinehack vending machine hack #vendingmachinebusiness vending machine business #vendingmachinecollection vending machine collection #collectingfromvendingmachine #snackvendingmachine
#usivendingmachine #vendovendingmachine #vendo #dixienarco #beavervending #collectingvendingmachine
#hacksforvendingmachine
#howtostartavendingbusiness #vending
tiktokvendinghack
You can hit me up on my website 👇
https://krome606.wixsite.com/website
You can follow me on Instagram @Vendinomicsllc
If you want free money click the link below👇
https://join.robinhood.com/kevinr2387
https://act.webull.com/i/sFLv4fsfABKa/q35/wb_deposit_us_01
☝️ With those two apps I have learned how to invest in stocks and used the money I made as a start up for a Vending machine business. Use my Link and we will both get a free stock on Robinhood or on Webull we will get 2 free stocks!
93
views
How to change windshield Wiper Blade 2005 Chevrolet Silverado 2500 hd
How to change a windshield wiper blade on a 2005 Chevrolet Silverado 2500hd.
how to take off and install new windshield wiper blades
You can hit me up on my website 👇
https://krome606.wixsite.com/website
You can follow me on Instagram @Vendinomicsllc
If you want free money click the link below👇
https://join.robinhood.com/kevinr2387
https://act.webull.com/i/sFLv4fsfABKa/q35/wb_deposit_us_01
☝️ With those two apps I have learned how to invest in stocks and used the money I made as a start up for a Vending machine business. Use my Link and we will both get a free stock on Robinhood or on Webull we will get 2 free stocks!
29
views
Re stocking two of my Vending Machine Locations
In this video I go to two of my vending machine locations and re stock. I did not collect either location. Waiting a couple more weeks for that.
Thank you for the support. It is appreciated.
any feedback is welcome.
vending machine tiktok vending hack tiktok vending machine hack #vendingmachinehack vending machine hack #vendingmachinebusiness vending machine business #vendingmachinecollection vending machine collection #collectingfromvendingmachine #snackvendingmachine
#usivendingmachine #vendovendingmachine #vendo #dixienarco #beavervending #collectingvendingmachine
#hacksforvendingmachine
#howtostartavendingbusiness #vending
tiktokvendinghack
You can hit me up on my website 👇
https://krome606.wixsite.com/website
You can follow me on Instagram @Vendinomicsllc
If you want free money click the link below👇
https://join.robinhood.com/kevinr2387
https://act.webull.com/i/sFLv4fsfABKa/q35/wb_deposit_us_01
☝️ With those two apps I have learned how to invest in stocks and used the money I made as a start up for a Vending machine business. Use my Link and we will both get a free stock on Robinhood or on Webull we will get 2 free stocks!
33
views
How to Change Oil 2005 Chevrolet Silverado 2500hd
In this video I show you how to change the oil on a 2005 Chevrolet Silverado 2005 hd.
Pretty simple process.
You will need a 15 mm socket or wrench
Remember righty tighty leftie loosey
Remember to wear the proper PPE and to be safe.
#2005Chevrolet #2005chevroletsilverado #oilchange
2005 Chevrolet Silverado oil change how to
You can hit me up on my website 👇
https://krome606.wixsite.com/website
You can follow me on Instagram @Vendinomicsllc
If you want free money click the link below👇
https://join.robinhood.com/kevinr2387
https://act.webull.com/i/sFLv4fsfABKa/q35/wb_deposit_us_01
☝️ With those two apps I have learned how to invest in stocks and used the money I made as a start up for a Vending machine business. Use my Link and we will both get a free stock on Robinhood or on Webull we will get 2 free stocks!
72
views
How to change Air Filter
In this video I show you how to change the air filter on a 2005 Chevrolet Silverado 2005 hd.
Pretty simple process.
You will need a T25 bit
Remember righty tighty leftie loosey
Remember to wear the proper PPE and to be safe.
#2005Chevrolet #2005chevroletsilverado #airfilter
2005 Chevrolet Silverado air filter change how to
You can hit me up on my website 👇
https://krome606.wixsite.com/website
You can follow me on Instagram @Vendinomicsllc
If you want free money click the link below👇
https://join.robinhood.com/kevinr2387
https://act.webull.com/i/sFLv4fsfABKa/q35/wb_deposit_us_01
☝️ With those two apps I have learned how to invest in stocks and used the money I made as a start up for a Vending machine business. Use my Link and we will both get a free stock on Robinhood or on Webull we will get 2 free stocks!
25
views
12 day HUGE COLLECTION from Vending Machine
In this video I go to one of my vending machine locations and re stock and collect it after 12 days. To my surprise it had more in it than I have ever had.
Thank you for the support. It is appreciated.
any feedback is welcome.
vending machine tiktok vending hack tiktok vending machine hack #vendingmachinehack vending machine hack #vendingmachinebusiness vending machine business #vendingmachinecollection vending machine collection #collectingfromvendingmachine #snackvendingmachine
#usivendingmachine #vendovendingmachine #vendo #dixienarco #beavervending #collectingvendingmachine
#hacksforvendingmachine
#howtostartavendingbusiness #vending
tiktokvendinghack
You can hit me up on my website 👇
https://krome606.wixsite.com/website
You can follow me on Instagram @Vendinomicsllc
If you want free money click the link below👇
https://join.robinhood.com/kevinr2387
https://act.webull.com/i/sFLv4fsfABKa/q35/wb_deposit_us_01
☝️ With those two apps I have learned how to invest in stocks and used the money I made as a start up for a Vending machine business. Use my Link and we will both get a free stock on Robinhood or on Webull we will get 2 free stocks!
44
views
HUGE! Collecting Money from 2 Vending Machines
Thank you for the support. It is appreciated.
any feedback is welcome.
vending machine tiktok vending hack tiktok vending machine hack #vendingmachinehack vending machine hack #vendingmachinebusiness vending machine business #vendingmachinecollection vending machine collection #collectingfromvendingmachine #snackvendingmachine
#usivendingmachine #vendovendingmachine #vendo #dixienarco #beavervending #collectingvendingmachine
#hacksforvendingmachine
#howtostartavendingbusiness #vending
tiktokvendinghack
You can hit me up on my website 👇
https://krome606.wixsite.com/website
You can follow me on Instagram @Vendinomicsllc
If you want free money click the link below👇
https://join.robinhood.com/kevinr2387
https://act.webull.com/i/sFLv4fsfABKa/q35/wb_deposit_us_01
☝️ With those two apps I have learned how to invest in stocks and used the money I made as a start up for a Vending machine business. Use my Link and we will both get a free stock on Robinhood or on Webull we will get 2 free stocks!
30
views
You NEED to HEAR this
I made this video for myself. I made this video so I can come back to it and to tell myself not to give up, ITS A MARATHON NOT A SPRINT BABY! Lets Kick some butt guys. We can do this. No matter what THROUGH ALL ODDS WE PREVAIL.
You can hit me up on my website 👇
https://krome606.wixsite.com/website
You can follow me on Instagram @Vendinomicsllc
If you want free money click the link below👇
https://join.robinhood.com/kevinr2387
https://act.webull.com/i/sFLv4fsfABKa/q35/wb_deposit_us_01
☝️ With those two apps I have learned how to invest in stocks and used the money I made as a start up for a Vending machine business. Use my Link and we will both get a free stock on Robinhood or on Webull we will get 2 free stocks!
#vendingmachine #vendingmachinehack #vendingmachinebusiness #vendingmachinecollection #collectingfromvendingmachine #snackvendingmachine
#usivendingmachine #vendovendingmachine #vendo #dixienarco #beavervending #collectingvendingmachine
#hacksforvendingmachine
#howtostartavendingbusiness #vending
25
views
Started a LANDSCAPE COMPANY. Landscape Design Hardscape
#landscaping #landscape #hardscape #smallbusiness #landscapedesign #hardscapedesign #passiveincome
I started a landscape company on the side. This was the first job we got. Me and my friend Josh started the company Green Landscape Design.
Out first job was a hardscape.
We chopped down all the bushes and trees, raked up mulch, edged, put down fabric so no weeds will come through, planted new flowers, and trees, put grass seed down, and hay.
landscaping landscape hardscape small business landscape Design hardscape design passive income
Music is by Not the King- Point Blank
26
views