Juniormints11

carver 350 post dive video, to include rudder damage at 3::24 and missing bottom paint

rocket stove shop heater, fast burning, heats shop quickly, 2 air in lets and 2 windows to view the fire

under water visual of Sundancer 330

underwater survey of 330n Chaperal

smallest burner nozzle tested so far, running approximately 1 quart per hour, tubing was 3/4 inch, fuel was waste motor oil

this propane burner demonstrates the difference you get when compressed air is used instead of relying on draft induction alone

underwater survey of 32 ft sail boat. Starting aft starboard side moving forward and around

this is a micro foundry, I am using a small fat propane bottle as the can for the casting of the refectory mix, rated to 3000 degrees. fuel in this video was mix of diesel and waste oil. Speed square for size reference

chain was tangled around the barrel, which is the anchor, once cleared and laid out plenty of slack

anchor buoy chain tangled up pulling the marker buoy under

This Foundry is running on waste motor oil, material melted is brass, and compressor set at 80 psi regulator pressure.