Electrodynamic Levitation (No Sound)
This video demonstrates very stable magnetic levitation by induced eddy currents through a moving conductor. The technology is described in
US Patent 5,319,336 titled: Levitation Device.
The master link listing all of our channel videos is : https://www.youtube.com/@algernon-yv8oo
Our work with levitating forces began about 30 years ago. We had some insight into a way to take a permanent magnet and use its own field to levitate itself in a very stable position through a term known as “eddy current induction”, aka “electrodynamic levitation”.
In 1842, Samuel Earnshaw proved what is now called Earnshaw's Theorem, which states that there is no stable and static configuration of levitating permanent magnets.
The technology does not violate but works around Earnshaw's Theorem by orienting the magnetic field in a perpendicular direction of the relative motion above a conducting metal such as aluminum.
The technology was featured in Extraordinary Science October 1993 Edition "Alcon Breakthrough in Magnetic Levitation".
A short video a our levitation device taken from a symposium with UCLA University on various forms of Levitation is seen at:
https://demoweb.physics.ucla.edu/content/10-alcon-levitator
The “Alcon Levitator” technology is still being studied today. An article published in the American Journal of Physics 87 (4) April 2019 discloses on page 3 and 4 of experiments performed by students in Spain studying the effects of the “Alcon Levitator” as the technology has been referred to by UCLA.
The “Alcon Levitator” is also mentioned in a book written by James D. Livingston called: “Rising Force” THE MAGIC OF MAGNETIC LEVITATION. Beginning on the last paragraph of page 71 and continuing on page 72, Mr. Livingston lists the “Alcon Levitator” As a patented contact free form of eddy current levitation.
The levitator was designed as a bench top demonstration for the magnetic stabilization forces of a magnetic dipole in a levitated state. Once the discovery was made, we started working on a design for a maglev transportation which would operate off of an aluminum guideway.
47
views
Electrical Amplification System Part 3
US Patent Application Publication No. US2023/0047891 A1
Published February 16, 2023
The master link listing all of our YouTube channel videos is : https://www.youtube.com/@algernon-yv8oo
A free download of the patent application is at: https://ufile.io/wbabc9if
Email: alconlabs@pm.me
This video demonstrates our new circuit board using 1200 volt transistors. It shows how the resonant power circuit loops energy from one battery to the other battery. We are using a rewound 180 volt Permanent Magnet DC motor wound with 22 AWG wire. The smaller wire draws less current from the primary battery and delivers a smaller amount of current to the secondary battery through a pair of capacitors which are receiving a high frequency signal from the resonant generator/motor. The generator operates without back EMF and rotates itself as a motor. We were careful not to hook up the secondary generator while operating in excess of 600 volts until we rewound our resonant generator/motors with with a new wire coating which would not short out with the higher currents drawn with larger wire. The next stage of development is larger resonant generators with rare earth magnets providing greater magnetic field densities.
15
views
Electrical Amplification System Part 2
US Patent Application Publication No. US2023/0047891 A1
Published February 16, 2023
The master link listing all of our YouTube channel videos is : https://www.youtube.com/@algernon-yv8oo
This video is part 2 of our early videos which tested our new inverter boards when we first received them. We have made more recent videos with our refined circuit boards, however this video along with our companion part 1 video demonstrates the power of our 3 HP motor running at 430 volts from the circuit board. Our resonant generator/motor is receiving power from the battery through the inverter and circuit board and circulating the power through the generator terminals that are connected together through a series of diodes to provide an internal load to the system which allows it to self rotate.
Our part 1 video discloses the resonant generator receiving power from the battery through the inverter and circuit board and returning the power back to the battery through our unique circuit. The motor torque and RPM can be modified to greatly increase by replacing the ferrite magnets in the stator field with rare earth magnets.
A free download of the patent application is at: https://ufile.io/wbabc9if
Email: alconlabs@pm.me
11
views
Electrical Amplification System Part 1
US Patent Application Publication No. US2023/0047891 A1
Published February 16, 2023
The master link listing all of our YouTube channel videos is : https://www.youtube.com/@algernon-yv8oo
This video is part 1 of our early videos which tested our new inverter boards when we first received them. We have made more recent videos with our refined circuit boards, however this video along with our companion part 2 video demonstrates the power of our 3 HP motor running at 430 volts from the circuit board. Our resonant generator/motor is receiving power from the battery through the inverter and circuit board and returning the power back to the battery through our unique circuit. The motor torque and RPM can be modified to greatly increase by replacing the ferrite magnets in the stator field with rare earth magnets. Our part 2 video shows the generator terminals connected together through a series of diodes to provide an internal load to the system to allow it to self rotate.
A free download of the patent application is at: https://ufile.io/wbabc9if
Email: alconlabs@pm.me
11
views