Green461

This is the 5th barrel I got and now finally complete again and waiting to be tested. Demonstration of the Riflespeed Gas System. See other video for how bad the Faxon barrel was.

Every gun you buy should be disassembled, inspected, and CLEANED before firing, especially anything imported. They are soaked with oil for shipping, storage. I'd bet most people with these M4 clones that have cycling issues with cheaper ammo may not be aware of this, DONT OIL THE GAS SYSTEM. Must be cleaned and dry. I've even read people with the real Benellis having issues... This might not correct everyones issues but may help a lot. After watching several vids of people unboxing and going right out to shoot and having cycling issues and blaming the gun I decided to make this video to explain a few things.. I cleaned my gun thoroughly before shooting it and it cycled 5 different ammo types flawlessly, from slow target loads on up... not one hiccup. Im very impressed with this cheap gun. And after inspecting a real M4 at Brownells, it looked like a hunk of junk, pitting in the steel, rough finish... wasnt impressed with the Benelli and glad I got this one. Comparison pics in the vid.

Took 3 barrels to get one with a decent finish, then once completed it wouldnt work anyway. They forgot to machine the taper on the barrel on the barrel extension side. Closing the bolt FMJ ammo would jam and lock half way in, no taper to guide it into chamber. Shorter bullets, SP and more round nose would feed but the longer FMJ would not make it and actually dented the barrel where they locked up... details of the issue in vid. I ordered a BHW one before i contacted the place i got this Faxon, since it had been 5 months i did not expect anything.. but AT3 Tactical were awesome and sent me a BA premium exchange for free. Comparison of the BA in vid. Also Faxon's muzzle end has issues as well. Faxon helped me early on with sending me 2 barrels, but later on with my feed issues they would no longer reply to emails or even the chat window on the website...