FPV Freestyle Livestream 😬 Goggle stream from walksnail & DJI
4th attempt at livestreaming, Same kit but software/config changes streaming Walksnail and DJI, i think this is the final config fingers crossed. Hopefully flying with my usual mates @circlefpv @lowkeyfpv and @bouncefpv
Using @camoapp and @cosmostreamer4773 and a load of other things, have a rats nest of cables
My Rig
Frame : TBS Source One V5 5"
VTX: DJI HD FPV System - Caddx Walksnail
Motors: T-Motor Velox 2307 1950kv
Props: Gemfan SBANG
RX/TX: RadioMaster RP3 ELRS and Ranger Micro
Battery: Tattu FunFly 1300 6S / Speedy Pizzas 1200 6S
FC: SucceX-E F7
ESC: T-Motor F55 Pro 2
Camera: Caddx Walksnail Pro with Walksnail Goggles DVR angle 25 degrees
Camera: GoPro 5 @ 25 degrees sometimes using ND filters
Radio: TBS Mambo Ethix & RadioMaster ranger Micro ELRS
Find Me:
Instagram https://www.instagram.com/genericfpv/
Rumble https://rumble.com/c/c-1963454
Thingiverse 3D Prints on https://www.thingiverse.com/genericfpv/
Non Quad Video Stuff
Sony ZV1
Crane m2 Gimbal
Rode Lav Mic
Edited in Luma Fusion on iPad
Streamed with @camoapp and Elgato HD60 S+ and @cosmostreamer4773 cheap amazon usb cap card
Thumbnails in Affinity Photo
7
views
FPV Freestyle Livestream 😬 Goggle stream from walksnail & DJI
3rd attempt at livestreaming, more kit again and hopefully streaming from both Walksnail and DJI. Had some packets/frames dropped last time so trying better signal as well. Hopefully flying with my usual mates @circlefpv @lowkeyfpv and @bouncefpv
Using @camoapp and @cosmostreamer4773 and a load of other things, have a rats nest of cables
My Rig
Frame : TBS Source One V5 5"
VTX: DJI HD FPV System - Caddx Walksnail
Motors: T-Motor Velox 2307 1950kv
Props: Gemfan SBANG
RX/TX: RadioMaster RP3 ELRS and Ranger Micro
Battery: Tattu FunFly 1300 6S / Speedy Pizzas 1200 6S
FC: SucceX-E F7
ESC: T-Motor F55 Pro 2
Camera: Caddx Walksnail Pro with Walksnail Goggles DVR angle 25 degrees
Camera: GoPro 5 @ 25 degrees sometimes using ND filters
Radio: TBS Mambo Ethix & RadioMaster ranger Micro ELRS
Find Me:
Instagram https://www.instagram.com/genericfpv/
Rumble https://rumble.com/c/c-1963454
Thingiverse 3D Prints on https://www.thingiverse.com/genericfpv/
Non Quad Video Stuff
Sony ZV1
Crane m2 Gimbal
Rode Lav Mic
Edited in Luma Fusion on iPad
Streamed with @camoapp and Elgato HD60 S+ and @cosmostreamer4773 cheap amazon usb cap card
Thumbnails in Affinity Photo
2
views
Walksnail at the Gridworks is it good enough? FPV Freestyle
The Gridworks is one of the iconic UK spots, and wow it lives up to it. I've been struggling with my 5" builds but Caddx game me some help and i'm running 12v BECs and it seems to have helped, i flew 13 packs crashing on everyone and the walksnail VTXs didnt miss a beat.
Chunk of stuff changed, Radiomaster ELRS RP3 receivers and they are awesome, I've run crossfire and tracer but struggled on tracer, loved crossfire but chewed through antennas due to the size. the RP3s are perfect size and range ELRS is as good as everyone says!
0:00 Intro
1:00 Flying 1
2:40 Random ramblings
3:00 Flying 2
Kwad Squad
@bouncefpv @circlefpv @lowkeyfpv @chewyflies8297 @whattheskysees
Find Me:
Instagram https://www.instagram.com/genericfpv/
Rumble https://rumble.com/c/c-1963454
Thingiverse 3D Prints on https://www.thingiverse.com/genericfpv/
My Rig
Frame : TBS Source One V5 5"
VTX: DJI HD FPV System - Caddx Walksnail
Motors: T-Motor Velox 2307 1950kv
Props: Gemfan SBANG
RX/TX: RadioMaster RP3 ELRS and Ranger Micro
Battery: Tattu FunFly 1300 6S / Speedy Pizzas 1200 6S
FC: SucceX-E F7
ESC: T-Motor F55 Pro 2
Camera: Caddx Walksnail Pro with Walksnail Goggles DVR angle 25 degrees
Camera: GoPro 5 @ 25 degrees sometimes using ND filters
Radio: TBS Mambo Ethix & RadioMaster ranger Micro ELRS
Non Quad Video Stuff
Sony ZV1
Crane m2 Gimbal
Rode Lav Mic
Edited in Luma Fusion on iPad
Thumbnails in Affinity Photo
7
views
Discovering the Dark Side of Dronefest 2023 - Whoops
Dronefest 2023 was amazing, it had the Mamba madness area for whoops and it was crazy good fun. I even one a challenge loop and got a woodchuck wasp via @Gemfanhobby thank you!
I also flew the social area and that was great ripping about, made couple new friends as well.
I put some new RCinpower 27000kv 0802s on the 65 and it enabled beast mode on it :D
Kwad Squad
@bouncefpv @circlefpv @lowkeyfpv @chewyflies8297 @whattheskysees
Find Me:
Instagram https://www.instagram.com/genericfpv/
Rumble https://rumble.com/c/c-1963454
Thingiverse 3D Prints on https://www.thingiverse.com/genericfpv/
My Kit
Goggles: Caddx Walksnail Avatar v1 with True RC antennas
Frame : TBS Source One V5 5"
VTX: Caddx Walksnail v1/v2
Motors: T-Motor Velox 2307 1950kv
Props: Gemfan SBANG
RX/TX: TBS Tracer Nano & RadioMaster ELRS
Battery: Tattu FunFly 1300 6S / Speedy Pizzas 1200 6S / CHNL Black 1100
FC: T-Motor single side F7
ESC: T-Motor F55 Pro 2
Camera: Caddx Walksnail Pro at 25 degrees
Camera: GoPro 5 @ 25 degrees using ND filters
Radio: TBS Mambo Ethix & RadioMaster ranger Micro ELRS
BetaFPV 75 walksnail stock apart from capopy
BetaFPV 65 Analog stock apart from RCInpower 27kv 0802 motors
-------- Non Quad Video Stuff --------
Sony ZV1
Rode Lav Mic
Edited in Luma Fusion on iPad
Thumbnails in Affinity Photo
9
views
Dronefest 2023 - Warzone Coventry - FPV Freestyle #Walksnail #Gemfan
Dronefest 2023 at Coventry warzone paintball was a blast, wish I could remember everyone’s name but loved hanging with all of you, see you next year!
Kwad Squad
@bouncefpv @circlefpv @lowkeyfpv @chewyflies8297 @whattheskysees
Find Me:
Instagram https://www.instagram.com/genericfpv/
Rumble https://rumble.com/c/c-1963454
Thingiverse 3D Prints on https://www.thingiverse.com/genericfpv/
------- My Rig --------
Frame : TBS Source One V5 5"
VTX: DJI HD FPV System - Caddx Walksnail
Motors: T-Motor Velox 2307 1950kv
Props: Gemfan SBANG
RX/TX: TBS Tracer Nano & RadioMaster ELRS
Battery: Tattu FunFly 1300 6S / Speedy Pizzas 1200 6S
FC: SucceX-E F7
ESC: T-Motor F55 Pro 2
Camera: Caddx Walksnail Pro with Walksnail Goggles DVR angle 25 degrees
Camera: GoPro 5 @ 25 degrees sometimes using ND filters
Radio: TBS Mambo Ethix & RadioMaster ranger Micro ELRS
-------- Non Quad Video Stuff --------
Sony ZV1
Rode Lav Mic
Edited in Luma Fusion on iPad
Thumbnails in Affinity Photo
3
views
FPV Freestyle Knife Edges at the farm bando on Walksnail
This spot is awsome and very close to home so hoping to fly it a lot more. Found a random tree on the side that HAS to be made for knife edges!
Still finding my feed with range and penatration with @CaddxFPV @walksnail2645 and its doing the job very nicely, getting comfy with my new kit but bent one of my capicitors so gonna need a bit of TLC on that.
@circlefpv managed to insert himself into a wall, had some ladders in the car so all ended well :P
Just put a order in for a @t-motorfpv5423 Pacer FC so soon ill be flying t-motor ESC, FC and motors - just take all my money :D
Kwad Squad
@bouncefpv @circlefpv @lowkeyfpv @chewyflies8297 @whattheskysees
Find Me:
Instagram https://www.instagram.com/genericfpv/
Rumble https://rumble.com/c/c-1963454
Thingiverse 3D Prints on https://www.thingiverse.com/genericfpv/
------- My Rig --------
Frame : TBS Source One V5 5"
VTX: DJI HD FPV System - Caddx Walksnail
Motors: T-Motor Velox 2307 1950kv
Props: Gemfan SBANG
RX/TX: TBS Tracer Nano & RadioMaster ELRS
Battery: Tattu FunFly 1300 6S / Speedy Pizzas 1200 6S
FC: SucceX-E F7
ESC: T-Motor F55 Pro 2
Camera: Caddx Walksnail Pro with Walksnail Goggles DVR angle 25 degrees
Camera: GoPro 5 @ 25 degrees sometimes using ND filters
Radio: TBS Mambo Ethix & RadioMaster ranger Micro ELRS
-------- Non Quad Video Stuff --------
Sony ZV1
Rode Lav Mic
Edited in Luma Fusion on iPad
Thumbnails in Affinity Photo
11
views
Proof of FPV Life - Back to flying 5" after a lot of repairs and whoop'in about
I'm alive and flying 5" kwads again! Been mentally hard few months for flying, all my stuff was broken so had to strip and rebuild (thanks @circlefpv ) and start to trust my kit again. Had 2 good weeks of no random fire or weirdness so i'm back to having fun!
Had to drop crossfire and now starting to drop tracer as cant buy it anywhere :( but after the inital change ELRS seems on par! New t-motor ESCs are they are smoooooth. Now on gemfan props, and all Walksnail rocking now so feeling good, just hop it lasts :D
Kwad Squad
@bouncefpv @circlefpv @lowkeyfpv @chewyflies8297 @whattheskysees
Find Me:
Instagram https://www.instagram.com/genericfpv/
Rumble https://rumble.com/c/c-1963454
Thingiverse 3D Prints on https://www.thingiverse.com/genericfpv/
------- My Rig --------
Frame : TBS Source One V5 5"
VTX: DJI HD FPV System - Caddx Walksnail
Motors: T-Motor Velox 2307 1950kv
Props: Gemfan SBANG
RX/TX: TBS Tracer Nano & RadioMaster ELRS
Battery: Tattu FunFly 1300 6S / Speedy Pizzas 1200 6S
FC: SucceX-E F7
ESC: T-Motor F55 Pro 2
Camera: Caddx Walksnail Pro with Walksnail Goggles DVR angle 25 degrees
Camera: GoPro 5 @ 25 degrees sometimes using ND filters
Radio: TBS Mambo Ethix & RadioMaster ranger Micro ELRS
-------- Non Quad Video Stuff --------
Sony ZV1
Rode Lav Mic
Edited in Luma Fusion on iPad
Thumbnails in Affinity Photo
8
views
Switching from DJI to Walksnail Avatar - My setup, tweaks and range / penetration test
DJI are the kind of company who want to sell you something every year or two, and that bugs me, i also recently discovered whoops and you just cant do it with DJI, so i was cautious and got myself a set of Caddx Walksnail Avatar goggles, a BetaFPV Meteor 75 and three pro v2 VTXs for my 5 inch kwads.
Taken me a long time to switch things over but man am i happy. For me in every way its better than my v1 DJI, same latency, way better video, and super comfy so its i'm chuffed.
Made a lot of changes to the goggles including antennas, straps, foam and more so i made a video along the way. Hope you can put up with my dull voice rambling but any questions let me know.
I'm not a Walksnail fanboy i still think o3 is better video quality - not by much, and i get why lot of people will stick with them, i also have no intention of stopping using my GoPro, so for me this is my weapon of choice!
Kwad Squad
@bouncefpv @circlefpv @lowkeyfpv @chewyflies8297 @whattheskysees
Find Me:
Instagram https://www.instagram.com/genericfpv/
Rumble https://rumble.com/c/c-1963454
Thingiverse 3D Prints on https://www.thingiverse.com/genericfpv/
------ My Kwads -------
Frame : TBS Source One V5 5"
VTX: Caddx Walksnail Avatar
Motors: T-Motor Velox 2307 1950kv
Props: Gemfan SBANG
RX/TX: TBS Tracer Nano
Battery: Tattu FunFly 1300 6S / Speedy Pizzas 1200 6S
FC: SucceX-E F7
ESC: SucceX Mini 45A
Camera: Caddx Walksnail Avatar Pro angle 25 degrees
Camera: GoPro 5 (mostley) & 9 @ 25 degrees sometimes using ND filters
Radio: TBS Mambo Ethix
Goggles: Caddx Walksnail Avatar
BetaFPV Meteor 75 Walksnail Edition ELRS
Motors: BetaFPV 1102 18000KV
Battery: BT2.0 450mAh 1S 30C
Frame: Meteor75 Micro Brushless Whoop Frame
Props: 40mm 3-Blade Propellers
FC&ESC: F4 1S 5A FC
VTX: 1S Walksnail Avatar Mini HD VTX
Camera: Wanlksnail Avatar Nano Camera
Radio: TBS Mambo Ethix & Radiomaster Micro ELRS
Goggles: Caddx Walksnail Avatar
------- Non Quad Video Stuff -------
Sony ZV1
Rode Lav Mic
Edited in Luma Fusion on iPad
Thumbnails in Affinity Photo
107
views
FPV freestyle with my Walksnail Whoop - IGOW pre wk3 entry Powerloops #igow4
I really want to get better at longer runs, i feel like quick edits are cheating a litte, so my personal IGOW is to make longer clips. Short on footage so threw in some b-roll :D #igow4 pre season 3, i've been trying powerloops on the whoop randomly and landed couple but had to get them much better. Last week was split s and they seem to have stuck with me, ive gone from hating them to trying to do them a lot more.
Been getting some solid advice from the IGOW Discord community so thank you!
BetaFPV Meteor 75 Walksnail Edition ELRS
Motors: BetaFPV 1102 18000KV
Battery: BT2.0 450mAh 1S 30C
Frame: Meteor75 Micro Brushless Whoop Frame
Props: 40mm 3-Blade Propellers
FC&ESC: F4 1S 5A FC
VTX: 1S Walksnail Avatar Mini HD VTX
Camera: Wanlksnail Avatar Nano Camera
Radio: TBS Mambo Ethix & Radiomaster Micro ELRS
Goggles: Caddx Walksnail Avatar
Kwad Squad
@bouncefpv @circlefpv @lowkeyfpv @chewyflies8297 @whattheskysees
Find Me:
Instagram https://www.instagram.com/genericfpv/
Rumble https://rumble.com/c/c-1963454
Thingiverse 3D Prints on https://www.thingiverse.com/genericfpv/
------ My Kwads -------
Frame : TBS Source One V5 5"
VTX: Caddx Walksnail Avatar
Motors: T-Motor Velox 2307 1950kv
Props: Gemfan SBANG
RX/TX: TBS Tracer Nano
Battery: Tattu FunFly 1300 6S / Speedy Pizzas 1200 6S
FC: SucceX-E F7
ESC: SucceX Mini 45A
Camera: Caddx Walksnail Avatar Pro angle 25 degrees
Camera: GoPro 5 (mostley) & 9 @ 25 degrees sometimes using ND filters
Radio: TBS Mambo Ethix
Goggles: Caddx Walksnail Avatar
BetaFPV Meteor 75 Walksnail Edition ELRS
Motors: BetaFPV 1102 18000KV
Battery: BT2.0 450mAh 1S 30C
Frame: Meteor75 Micro Brushless Whoop Frame
Props: 40mm 3-Blade Propellers
FC&ESC: F4 1S 5A FC
VTX: 1S Walksnail Avatar Mini HD VTX
Camera: Wanlksnail Avatar Nano Camera
Radio: TBS Mambo Ethix & Radiomaster Micro ELRS
Goggles: Caddx Walksnail Avatar
------- Non Quad Video Stuff -------
Sony ZV1
Rode Lav Mic
Edited in Luma Fusion on iPad
Thumbnails in Affinity Photo
11
views
FPV After Dark Carpark Ripping #kwad
Havent flown a huge amount which sucks, but quick edit from a multistory car park rip with the guys. Hoping the weather is better and next week i should be able to get more packs in.
Thinking of taking my LED gates for next time as could be a cool spot for a mini race!
Its hard being a FPV addict :/
Kwad Squad
@bouncefpv @circlefpv @lowkeyfpv @chewyflies8297
Find Me:
Instagram https://www.instagram.com/generic_fpv/
Rumble https://rumble.com/c/c-1963454
Thingiverse 3D Prints on https://www.thingiverse.com/genericfpv/
------- My Rig --------
Frame : TBS Source One V5 5"
VTX: DJI HD FPV System - Caddx Vista
Motors: T-Motor Velox 2307 1950kv
Props: Ethix S4
RX/TX: TBS Tracer Nano
Battery: Tattu FunFly 1300 6S / Speedy Pizzas 1200 6S
FC: SucceX-E F7
ESC: SucceX Mini 45A
Camera: Caddx Nebula Pro with DJI Goggle DVR angle 25 degrees
Camera: GoPro 5 & 8 @ 25 degrees sometimes using ND filters
Radio: TBS Mambo Ethix
-------- Non Quad Video Stuff --------
Sony ZV1
Rode Lav Mic
Edited in Luma Fusion on iPad
Thumbnails in Affinity Photo
8
views
Stupidly windy day at the Brickworks - Freestyle FPV UK
Had a windy day near Milton Keynes at the brickworks, way too windy to be outside so we went into a building that was ready to fall over.... what could go wrong. i FINALLY managed the powerloop i've been trying for ages, wasnt clean but i'll take it!
Flying with @Datfpv @lowkeyfpv and my bestie @circlefpv
Go checkout datfpv's videos as the dude seriously ripped it and took some damage here!
Find Me:
Instagram https://www.instagram.com/generic_fpv/
Rumble https://rumble.com/c/c-1963454
Thingiverse 3D Prints on https://www.thingiverse.com/genericfpv/
------- My Rig --------
Frame : TBS Source One V5 5"
VTX: DJI HD FPV System - Caddx Vista
Motors: T-Motor Velox 2307 1950kv
Props: Ethix S3
RX/TX: TBS Tracer Nano
Battery: Tattu FunFly 1300 6S / Speedy Pizzas 1200 6S
FC: SucceX-E F7
ESC: SucceX Mini 45A
Camera: Caddx Nebula Pro with DJI Goggle DVR angle 25 degrees
Camera: GoPro 5 & 8 @ 25 degrees sometimes using ND filters
Radio: TBS Mambo Ethix
Edited in VLLO Video editor app and Canva
25
views
Underground FPV in Northampton - 1 Pack
New spot - not sure how long we will be able to fly here but if it buys us a couple weeks flying in the rain i'll take it! This pack was a laugh, and the song seems to fit i think :P nothing technical in here just a straight rip having fun!
This is on my gopro 5 which is still being a champion and doing good in low light, DESPERATE for gopro to bring out the Session6!
Find Me:
Instagram https://www.instagram.com/generic_fpv/
Rumble https://rumble.com/c/c-1963454
Thingiverse 3D Prints on https://www.thingiverse.com/genericfpv/
------- My Rig --------
Frame : TBS Source One V5 5"
VTX: DJI HD FPV System - Caddx Vista
Motors: T-Motor Velox 2307 1950kv
Props: Ethix S3
RX/TX: TBS Tracer Nano
Battery: Tattu FunFly 1300 6S / Speedy Pizzas 1200 6S
FC: SucceX-E F7
ESC: SucceX Mini 45A
Camera: Caddx Nebula Pro with DJI Goggle DVR angle 25 degrees
Camera: GoPro 5 & 8 @ 25 degrees sometimes using ND filters
Radio: TBS Mambo Ethix
Edited in VLLO Video editor app and Canva
5
views
iFlight a85 Digiwhoop - changes i made so i could acro freestyle with it
Something very different from me, i got the iFlight a85 recently and loved it, i really wanted to fly in Acro more during bad weather, i found the tune and build a little off for acro so this video is about some of the changes i made to it and why.
00:00 Trying to be flashy shots & Flying
00:29 Introduction
01:29 Physical Changes
02:25 Betaflight
03:38 Radio & Crossfire
06:18 Build Quality and Durability
07:14 Crash section
07:57 Batteries iflight vs GNB
09:13 Summary
First time using GNB batteries and im impressed, cheaper than the iFlight Fullsend and same performance, tidier build so all round winners!
https://shop.iflight-rc.com/Alpha-A85-HD-Whoop-BNF-Pro1838
https://www.hobbyrc.co.uk/gnb-450mah-4s-80c-lipo-battery-xt30
Its the first video I've done like this so go easy on me, if i recorded it again today i'd already do it very differently but you have to start somewhere!
I'm using 10 year old video gear so no 4k or fancy mics, maybe i'll upgrade if i make more content and people actually want to watch it :D If you read this far thank you very much!
Find Me:
Instagram https://www.instagram.com/generic_fpv/
Rumble https://rumble.com/c/c-1963454
Thingiverse 3D Prints on https://www.thingiverse.com/genericfpv/
------- My Rig --------
Frame : TBS Source One V5 5"
VTX: DJI HD FPV System - Caddx Vista
Motors: T-Motor Velox 2307 1950kv
Props: Ethix S3
RX/TX: TBS Tracer Nano
Battery: Tattu FunFly 1300 6S / Speedy Pizzas 1200 6S
FC: SucceX-E F7
ESC: SucceX Mini 45A
Camera: Caddx Nebula Pro with DJI Goggle DVR angle 25 degrees
Camera: GoPro 5 & 8 @ 25 degrees sometimes using ND filters
Radio: TBS Mambo Ethix
Edited in VLLO Video editor app and Canva
6
views
The most flippy floppy I've ever been 🤮 FPV in Coventry
Last visit here i broke a screen protector and landed in moss inserting a lot into the ESC, luckily it was conformal coated but it could have fried or burnt up so i called it a day.
This time went back with 2 kwads, both good to go, i then proceeded to break a arm and a bottom plate ffs :D managed to get all my packs in, editing this made me feel dizzy so i think i'm going to slow my rates bit more as im over correcting and micro twitches looking bad but hopefully that will help a little!
00:00 Intro
00:13 Pack 1
00:59 Pack 2
Find Me:
Instagram https://www.instagram.com/generic_fpv/
Rumble https://rumble.com/c/c-1963454
Thingiverse 3D Prints on https://www.thingiverse.com/genericfpv/
------- My Rig --------
Frame : TBS Source One V5 5"
VTX: DJI HD FPV System - Caddx Vista
Motors: T-Motor Velox 2307 1950kv
Props: Ethix S3
RX/TX: TBS Tracer Nano
Battery: Tattu FunFly 1300 6S / Speedy Pizzas 1200 6S
FC: SucceX-E F7
ESC: SucceX Mini 45A
Camera: Caddx Nebula Pro with DJI Goggle DVR angle 25 degrees
Camera: GoPro 5 & 8 @ 25 degrees sometimes using ND filters
Radio: TBS Mambo Ethix
Edited in VLLO Video editor app and Canva
4
views
Choppin Trees at the Boneyard - my first 💩 FPV vlog
My first lame attempts at talking to the camera, its REALLY hard, instantly more respect and gratitude to all the talking video people! Granted i talk for about 10 seconds but i had to edit down from 3 minutes of trash :D
Broke a GoPro lens protector and got the kwad soaking in a moss pile but luckily i had conformal coated it so no problems just dried off on the radiator. Flying footage is less than average but all i had :D
Let me know if i should talk to the camera more, i have a video i'm planning on doing on a bench talking about my new iflight A85 quad but its going to take a while to make! Not sure i want to do it but i wish there were more UK pilots talking to the camera, so figured if i butcher it someone else will do a better job so i dont have to. @ts13fpv is inspiring me atm so big thanks to him and check him out if you havent already!
00:00 Intro, Chopping and Talking
00:53 Flying
01:51 Crash and Outtro
Find Me:
Instagram https://www.instagram.com/generic_fpv/
Rumble https://rumble.com/c/c-1963454
Thingiverse 3D Prints on https://www.thingiverse.com/genericfpv/
------- My Rig --------
Frame : TBS Source One HD 5"
VTX: DJI HD FPV System - Caddx Vista
Motors: Xing 1300 1750kv / T-Motor Velox 2307 1950kv
Props: Ethix S3
RX/TX: TBS Crossfire Nano
Battery: Tattu FunFly 1300 6S / Speedy Pizzas 1200 6S
FC: SucceX-E F7
ESC: SucceX Mini 45A
Camera: Caddx Nebula Pro with DJI Goggle DVR 25 degrees
Camera: GoPro 5 & 8 @ 25 degrees sometimes using ND filters
Radio: TBS Mambo Ethix
Edited in VLLO Video editor app and Canva
39
views
the Church of FPV - the place to go and worship the freestyle kwad gods
Was supposed to be flying another spot it had just been secured so we had to find a new spot - @bouncefpv plucked this place out of thin air and its awesome fun. It was "only" -2c but we got in a few packs before it just got too cold and we left with that warm feeling only ripping through some lipos can give you!
I'm flying my new TBS Source one v5 frame with flat antennas and tracer and so far seems good, wasn't expecting to feel any different but its def snappier to respond
Find Me on Instagram https://www.instagram.com/generic_fpv/
3D Prints on https://www.thingiverse.com/genericfpv/
------- My Rig --------
Frame : TBS Source One HD 5"
VTX: DJI HD FPV System - Caddx Vista
Motors: Xing 1300 1750kv / T-Motor Velox 2307 1950kv
Props: Ethix S3
RX/TX: TBS Crossfire Nano
Battery: Tattu FunFly 1300 6S / Speedy Pizzas 1200 6S
FC: SucceX-E F7
ESC: SucceX Mini 45A
Camera: Caddx Nebula Pro with DJI Goggle DVR 25 degrees
Camera: GoPro 5 & 8 @ 25 degrees sometimes using ND filters
Radio: TBS Mambo Ethix
Edited in VLLO Video editor app and Canva
10
views
2
comments
FPV Freestyle Brickworks: Breaking EVEN More Stuff
Return to Brickworks - Because i hadn't broken enough stuff last time, i came back on a mission to split s and powerloop the gantry, got the split s but not the powerloop so i'll be back to throw more money into the dirt urgh.
I'm def getting very low on the amount of repairs and parts i'm going through but i feel like progression is FPV sometimes is a gradual increase, or other times is a wall you have to just smash through, i want to dive things and do cool gaps but you cant softly try them - full send for better or worse, and just hope i learn more than i can afford to break :/
Find Me on Instagram https://www.instagram.com/generic_fpv/
------- My Rig --------
Frame : TBS Source One HD 5"
VTX: DJI HD FPV System - Caddx Vista
Motors: Xing 1300 1750kv / T-Motor Velox 2307 1950kv
Props: Ethix S3
RX/TX: TBS Crossfire Nano
Battery: Tattu FunFly 1300 6S / Speedy Pizzas 1200 6S
FC: SucceX-E F7
ESC: SucceX Mini 45A
Camera: Caddx Nebula Pro with DJI Goggle DVR 25 degrees
Camera: GoPro 5 & 8 @ 25 degrees sometimes using ND filters
Radio: TBS Mambo Ethix
Edited in VLLO Video editor app and Canva
18
views
Fpv Freestyle Tricks at Costa - By the Seat of My Pants 😳
Met up with @bounceFPV for another night session at the new spot in Northampton always lively :D was 4 degrees.... hate the UK sometimes! Due to all the broken stuff im using a turd of a gopro mount so sorry about the mounting :P
Been having a bad couple weeks breaking all my gear, another vista and frame have been sacrificed to the kwad gods :( trying to keep in the air and down to one kwad while i save up and build another 2 so im busy with soldering which i hate.
Find Me on Instagram https://www.instagram.com/generic_fpv/
------- My Rig --------
Frame : TBS Source One HD 5"
VTX: DJI HD FPV System - Caddx Vista
Motors: Xing 1300 1750kv / T-Motor Velox 2307 1950kv
Props: Ethix S3
RX/TX: TBS Crossfire Nano
Battery: Tattu FunFly 1300 6S / Speedy Pizzas 1200 6S
FC: SucceX-E F7
ESC: SucceX Mini 45A
Camera: Caddx Nebula Pro with DJI Goggle DVR 25 degrees
Camera: GoPro 5 & 8 @ 25 degrees sometimes using ND filters
Radio: TBS Mambo Ethix
Edited in VLLO Video editor app and Canva
4
views
Don't stop me now - Bankers Paradise Freestyle FPV Coventry DJI
Back at the new spot, and i'm in Love with the place! Met up with @Quadforsaken FPV and @DARKSFPV - was great seeing them and been too long, should hang out more!
Broke another load of stuff, props, a arm, gopro mount and a bottom plate, starting to get expensive but holly crap is FPV addictive!
Find Me on Instagram https://www.instagram.com/generic_fpv/
------- My Rig --------
Frame : TBS Source One HD 5"
VTX: DJI HD FPV System - Caddx Vista
Motors: Xing 1300 1750kv / T-Motor Velox 2307 1950kv
Props: Ethix S3
RX/TX: TBS Crossfire Nano
Battery: Tattu FunFly 1300 6S / Speedy Pizzas 1200 6S
FC: SucceX-E F7
ESC: SucceX Mini 45A
Camera: Caddx Nebula Pro with DJI Goggle DVR 25 degrees
Camera: GoPro 5 & 8 @ 25 degrees sometimes using ND filters
Radio: TBS Mambo Ethix
Edited in VLLO Video editor app and Canva
80
views
2
comments