2001 F250 Powerstroke. Changing out the shocks.
Changing out the shocks on my 2001 F250 Powerstroke. All of them are changed out taking about 2 hours total time.
12
views
Replacing injectors on a 2014 TDI VW Passat
2014 Passat TDI. I had a check engine light pop, investigated with my code reader and found something I didn't really like. Code indicated cylinder 3 injector was failing so I figured since I was going to be into it that I would replace all 4. At the time of this repair the car has about 120k miles on it.
I sourced the injectors from https://vw.oempartsonline.com
All other required parts are from https://www.idparts.com
14
views
Cabin trusses and roof going on
The final big time lapse video of the cabin build. This is the trusses being built and the steel roofing going on.
12
views
Building the second floor of the cabin
This is the fourth video of my small cabin build (10x20) its not quite off grid for now. The features I plan on having in the cabin will be good proof of concept and at a later date could be switched over to be completely off grid. This one is the second floor construction and knee walls.
21
views
Building the first floor walls of the cabin
This is the third video of my small cabin build (10x20) its not quite off grid for now. The features I plan on having in the cabin will be good proof of concept and at a later date could be switched over to be completely off grid. This video is the complete construction of the first floor walls.
19
views
Building the cabin floor platform
This is the second video of my small cabin build (10x20) its not quite off grid for now. The features I plan on having in the cabin will be good proof of concept and at a later date could be switched over to be completely off grid. This video is the complete construction of the supports and entire floor of the cabin.
14
views
Excavating and preparing the hill for a new cabin
In this video with the assistance of my Dad we cut a cabin site out of the hill. This is also where I broke my skid steer cut edge. The machines I am running are both Caterpillar, one is a 242D the other is a 303CR.
7
views
Caterpillar 242D bucket cut edge repair.
So I broke the cut edge on my bucket. This is my repair so I can continue working with my machine. Eventually I will have to buy a new one but for now I am back up and running.
1
view
Winter 2022 a bit of plowing
Just a video of me plowing out from one of our many snow storms so far this year.
1
view
2001 F250 7.3L Powerstroke Oil change and some maintenance
Simply put, changing the oil (with an oops) and some general maintenance of my 2001 F250 powerstroke.
26
views
Caterpillar 242D water in fuel tank repair and changing some filters
One of the many projects....Caterpillar 242D. As you may have seen in a previous video I mentioned that there was water leaking into my fuel tank and pointed it out in the video https://youtu.be/jentOXBfNPo (about 7:50 in). Well this is the fix that I came up with. In addition to fixing the leak I also go through replacing the fuel filters as well as the air cleaner elements.
11
views
Replacing blinker light on 2001 F250 7.3L
Just a quick and easy video replacing the blinker on my truck. Start to finish real time (with the exception of getting the actual light).
14
views
Part 3 shipping container remodel and starting repairs on Caterpillar 242D
Its been rather busy since the weather has become nice. I have pretty much finished the shipping container remodel, during that time I was also unpacking/re-packing all the "stuff" that was stored. Not a whole lot of videos of me finishing the shipping container though. I will also be fixing my Caterpillar 242D and begin that task in this video as well.
14
views
Lightning storm June 5th
A little bit of a change from what I normally post but thought some of you may enjoy it. On the evening of June 5th we had quite the thunder storm and I set up a time lapse in the window. These are the pictures I got. I hope you enjoy.
9
views
Shipping container remodel pt 2
The second installment of my shipping container remodel. In this one I am building the large work bench indicated on my design. I do spare you watching me move all the stuff out before I begin building. This work bench is about as custom as custom gets as other than the idea of where I want it and the approximate length there are no designs to follow. The third and final video will be finishing the small bench, wiring all the outlets and a final overview of the remodel.
6
views
Shipping container remodel PT 1
I bought a 20' long shipping container last year and built a bunch of storage shelves in it. Now I am turning it into a small workshop with a storage area in it.
8
views
I have finally finished cutting apart the old home built brush rake!
As the title says I am finally done with cutting apart the home built brush rake. This took me some time to do, I did take my time to maximize the amount of steel I was able to save so it could have gone much faster had I not done that. With cost of materials though it was well worth taking the time to save as much as I could.
9
views
Caterpillar 303 CR - Testing the repair and cleaning up after the cows
What better way to test if the repairs worked than running the machine? In this video Dad and I clean out the cows feed area, this muck is from the winter and is about 2 feet deep. Now that the 303 is repaired its time to get to work!
10
views
Caterpillar 303 CR Travel valve leaks part 2
The completion of repairing the travel valves for my Caterpillar 303 CR, mistakes included.
19
views
Second major use of my Titanium plasma cutter
I use my Titanium plasma cutter to disassemble a home made brush blade.
7
views
Caterpillar 303 CR Travel Valves Leak (Part 1)
My Caterpillar 303 CR leaks hydraulic fluid from the travel valves. It has done this since I bought it and I suspect quite a while before that. With the help of my Dad we dig in to see if we can get it fixed. Having never done this before and not finding any technical data we muddle around for a while trying to figure this out. Mistakes are included in the video.
9
views
2001 F250 7.3L Steering stabilizer damper shock replacement
A quick repair of my truck. 2001 Ford F250 7.3L Diesel needing a steering stabilizer shock replacement. Actual time required to do this is about 20 minutes.
21
views
Installing new lights on my Caterpillar 242D
Replacing factory lights on Caterpillar 242D with Harbor Freight replacements. Nothing too fancy, although there is a slight modification required with the new lights.
5
views
Plowing first snow of the season 2021
The first major snow at my new place 2021, plowed with a standard bucket on a Caterpillar 242D. I had my assistant Calypso (my German Shepherd) during the making of this. Unfortunately this was the only good snow storm I was able to capture as I was ill and not able to work for a couple of months.
7
views
Replacing the starter on my Caterpillar 303 CR mini excavator
This video is the beginning of my Caterpillar 303 CR mini excavator. This machine is a 2004 model and has seen some use, it has just over 5000 hrs on it now and I purchased it used about 9 months ago. Of course I knew there would be needed repairs and this is the first major one. So my Dad and I get to work.
35
views