Garage update.
We’re doing some major repair work to the house, vet and garage at the moment so I e not been able to work on the car. Busy packing up the tools and parts so that the builders can get cracking on the repairs inside the garage this week.
9
views
Cleaning the Bowie
Finally found a gap to give the Bowie a polish, the brass guard shined up nicely but the blade still has some staining and discolouration. I might need to run in on a polishing wheel and see from there.
54
views
Testing the electrical systems in the Golf.
Finally found a gap to start testing the electrics in the Golf. #vw #vwgolf #vwgolfmk1 #vwgolfmk1gti #volkswagen #volkswagengolf #hothatch #classiccars #projectcar #projectcars #projectkirschwasser #builtnotbought #tool #carsofinstagram #carrestoration #oem #oemparts #oemplus
47
views
Time to replace to fuel hose clamps😅
I noticed lots of air bubbles going through the fuel filter. Looks like the clamp is giving up the ghost.
53
views
After service inspection.
I’ve done a major service on the car quite a while ago, this included a coolant and engine flush, thermostat replacement and the usual oil, filter and spark plug changes. She’s running very well for a 53 year old vehicle.
25
views
Quick question for the Rumble Knifesmiths
So I made this Bowie inspired knife many years ago. It was the first time I made one of these so please forgive it’s crudeness.
I’ve notice that there is a constant discolouration appearing on the metal and I would like to see if I can stop it.
I suspect it’s from the sheath I made for it so I will need to make another one at some point.
Any recommendations on how to clean the blade up? I was going to try polishing it with a light polish like Brasso or Silvo and see how it turns out.
101
views
Kirschwasser Project Update 13 December 2023
A quick recap on a new snag that has popped up. Not impossible to get around so we will push on with some help.
If you enjoyed the content maybe consider giving us a boost with a donation on Paypal?
paypal.me/251ProjectsZA/5
paypal.me/251ProjectsZA/10
paypal.me/251ProjectsZA/15
paypal.me/251ProjectsZA/25
68
views
Kirschwasser Project Update 8 December 2023
would love to see some comments and interact with everyone.
Hope you guys enjoy it.
Youtube Channel:
https://www.youtube.com/channel/UCEvK5kVJene0JxwPpOmwOzQ
Follow on Instagram: https://instagram.com/sramsay1981/
Follow on Pinterest: https://za.pinterest.com/sramsay1981/
If you would like to give the project a boost why not consider a small donation?
paypal.me/251ProjectsZA/5
paypal.me/251ProjectsZA/10
paypal.me/251ProjectsZA/15
paypal.me/251ProjectsZA/25
43
views
Mitsubishi Colt 1970 - Radiator Check 2
A coolant leak before going for roadworthy was a major set back
20
views
1
comment
Kirschwasser Project Update 12 April 2021 Part 2
Part 2 of the big push, hoping you guys like the progress. This is a re-upload as there was an audio issue with the codec previously.
I would love to see some comments and interact with everyone.
Hope you guys enjoy it.
Youtube Channel:
https://www.youtube.com/channel/UCEvK...
Follow on Twitter: https://twitter.com/exdohctor
Follow on Instagram: https://instagram.com/sramsay1981/
Follow on Pinterest: https://za.pinterest.com/sramsay1981/
If you would like to give the project a boost why not consider a small donation?
paypal.me/251ProjectsZA/5
paypal.me/251ProjectsZA/10
paypal.me/251ProjectsZA/15
paypal.me/251ProjectsZA/25
31
views
Kirschwasser Project Update 12 April 2021
Part 1 of a major push on the project. We make some good progress and are closing the gap to the first start up. Watch out for part 2!
I would love to see some comments and interact with everyone.
Hope you guys enjoy it.
Youtube Channel:
https://www.youtube.com/channel/UCEvK5kVJene0JxwPpOmwOzQ
Follow on Twitter: https://twitter.com/exdohctor
Follow on Instagram: https://instagram.com/sramsay1981/
Follow on Pinterest: https://za.pinterest.com/sramsay1981/
If you would like to give the project a boost why not consider a small donation?
paypal.me/251ProjectsZA/5
paypal.me/251ProjectsZA/10
paypal.me/251ProjectsZA/15
paypal.me/251ProjectsZA/25
13
views
Project Kirschwasser Main Wiring Harness
Finally managed to expand the firewall hole and pull the wiring harness through to the engine bay, starting to go through it inside and one to make sure I have everything I need to get this car running again.
13
views
Project Palamino
Getting ready to take her back to the mechanic to have the clutch checked out. Randomly decided to stop gear changing for some reason.
46
views
Mitsubishi Colt - Radiator Check
Topped up the radiator and added some Wynns Radiator Stop Leak. Let’s see how things work out.
87
views
1
comment
Mitsubishi Colt 1100
Just as I was getting her ready to go for a roadworthy inspection, she sprouts a leak.
37
views
Project Kirschwasser
Fiddling with the car the other night. Fixing previous owners mistakes.
51
views
Kirschwasser Project Update 3 February 2021
We've been very busy playing catch up from last year. Let me know what you think of the progress.
I would love to see some comments and interact with everyone.
Hope you guys enjoy it.
Youtube Channel:
https://www.youtube.com/channel/UCEvK5kVJene0JxwPpOmwOzQ
Follow on Twitter: https://twitter.com/exdohctor
Follow on Instagram: https://instagram.com/sramsay1981/
Follow on Pinterest: https://za.pinterest.com/sramsay1981/
If you would like to give the project a boost why not consider a small donation?
paypal.me/251ProjectsZA/5
paypal.me/251ProjectsZA/10
paypal.me/251ProjectsZA/15
paypal.me/251ProjectsZA/25
75
views
Kirschwasser Project Update 10 November 2019
We've been quiet, but we've been busy. Lots of smaller items have been taken care of.
I would love to see some comments and interact with everyone.
If you enjoyed the content maybe consider giving us a boost with a donation on Paypal?
paypal.me/251ProjectsZA/5
paypal.me/251ProjectsZA/10
paypal.me/251ProjectsZA/15
paypal.me/251ProjectsZA/25
10
views
Kirschwasser Project Update 20 July 2019
Hey guys,
Thought I'd do a quick general update. It is a bit jump cut heavy, had to refilm a few items due to background noise.
If you enjoyed the content maybe consider giving us a boost with a donation on Paypal?
paypal.me/251ProjectsZA/5
paypal.me/251ProjectsZA/10
paypal.me/251ProjectsZA/15
paypal.me/251ProjectsZA/25
14
views
Kirschwasser Project Update 11 May 2019
We touch base again from the last video and explore some current and upcoming garage upgrades.
If you enjoyed the content maybe consider giving us a boost with a donation on Paypal?
paypal.me/251ProjectsZA/5
paypal.me/251ProjectsZA/10
paypal.me/251ProjectsZA/15
paypal.me/251ProjectsZA/25
7
views
Kirschwasser Project Update 16 April 2019
Just a quick update on some work I've done.
If you enjoyed the content maybe consider giving us a boost with a donation on Paypal?
paypal.me/251ProjectsZA/5
paypal.me/251ProjectsZA/10
paypal.me/251ProjectsZA/15
paypal.me/251ProjectsZA/25
28
views
Kirschwasser Project Update 1 March 2019
Hey guys, are a long break we've finally picked this up again.
A few small updates on multiple projects but we're making some progress and closing things off slowly.
If you enjoyed the content maybe consider giving us a boost with a donation on Paypal?
paypal.me/251ProjectsZA/5
paypal.me/251ProjectsZA/10
paypal.me/251ProjectsZA/15
paypal.me/251ProjectsZA/25
27
views
1
comment
Kirschwasser Project Update 22 November 2018
We've made some decent progress with the motor, should almost be time to drop her back into the car.
If you enjoyed the content maybe consider giving us a boost with a donation on Paypal?
paypal.me/251ProjectsZA/5
paypal.me/251ProjectsZA/10
paypal.me/251ProjectsZA/15
paypal.me/251ProjectsZA/25
19
views
Kirschwasser Project Update 25 September 2018
Hey guys,
I've been quiet but I've been busy. 10 hours of scrubbing and degreasing this engine and she's looking fantastic.
If you enjoyed the content maybe consider giving us a boost with a donation on Paypal?
paypal.me/251ProjectsZA/5
paypal.me/251ProjectsZA/10
paypal.me/251ProjectsZA/15
paypal.me/251ProjectsZA/25
15
views
Kirschwasser Project Update 21 August 2018 (Jump Cut Heavy).
Hey guys,
Just thought I'd turn the camera on this afternoon and give an update. Sorry for the jump cuts towards the end, there was a lot of road noise interfering with the video.
It's gonna be fun to get the motor and everything back in and started again.
Time to push push push.
If you enjoyed the content maybe consider giving us a boost with a donation on Paypal?
paypal.me/251ProjectsZA/5
paypal.me/251ProjectsZA/10
paypal.me/251ProjectsZA/15
paypal.me/251ProjectsZA/25
44
views