DissectingDIY

Hello everyone, this is Part 1 of 2 of my wall desk build. I originally had this idea for an area under a bulkhead in my basement. My wife found a desk similar to what I wanted on Pottery barn. However, its price was far outside what we could afford. This is my take on the Logan Desk. This project will require a lot of straight cuts and breaking down plywood to the sizes you need. You will need 6 sheets of 3/4 Poplar Plywood 2 sheets of Birch for desk top 2.5 sheets of 1/2 inches sanded plywood. (12) 1x2x8 (Pine, Poplar, Maple, Red oak.) (2)1x6x8 (Pine, Poplar, Maple, Red Oak.) (1)sheet of MDF (7) 1x3x8 maple Kreg Jig Tools: Pocket hole jig Shelf Jig European hinge jig Kreg Jig fine thread screws 1” 1/4 Wood Glue (I prefer Titebond original) Kreg Jig pocket screws 1 quart Polyshades Ebony 1 quart Polyurethane gloss 1 gallon White paint paint Brushes for oil and latex paints (120, 180, 220, 400)grit sand paper Hardware of your Choosing 8 European style hinges for inset door 4 sets of drawers slides at 20" dept Hand planer Orbital sander (Preference) Finish nailer Brad Nailer Stable gun Pin nailer