CZAdvertizing

The Corn Kernel Cutter uses power from your air compressor to cut all the kernels off an ear of fresh sweet corn with a push of a button in one swipe. This affordable and easy to use device will help you process more corn with less effort than anything short of production machines costing tens of thousands of dollars. The Corn Kernel Cutter is build from precision components machined on our own state-of-the-art 5 axis CNC equipment right here in Maries County, Missouri where we love our sweet corn! The all metal but light weight design is easy to store and built tough enough to he handed down to your kids and grandkids. It comes fully assembled -- just add an 80 to 140 psi compressed air source. An stainless steel annular knife can be sized to match varieties of corn with small or large cobs in just seconds. The funnel shaped ear pusher centers and guides the ear into the knife and a spring-loaded plunger in the core of the funnel pushes the cob through the knife into a trash can or bucket below. See for your self what over 43 years of innovation at CZ Engineering, Inc. has brought to your table. To purchase or learn more go to www.corn-kernel-cutter.com.

The Corn Kernel Cutter uses power from your air compressor to cut all the kernels off an ear of fresh sweet corn with a push of a button in one swipe. This affordable and easy to use device will help you process more corn with less effort than anything short of production machines costing tens of thousands of dollars. The Corn Kernel Cutter is build from precision components machined on our own state-of-the-art 5 axis CNC equipment right here in Maries County, Missouri where we love our sweet corn! The all metal but light weight design is easy to store and built tough enough to he handed down to your kids and grandkids. It comes fully assembled -- just add an 80 to 140 psi compressed air source. An stainless steel annular knife can be sized to match varieties of corn with small or large cobs in just seconds. The funnel shaped ear pusher centers and guides the ear into the knife and a spring-loaded plunger in the core of the funnel pushes the cob through the knife into a trash can or bucket below. See for your self what over 43 years of innovation at CZ Engineering, Inc. has brought to your table. To purchase or learn more go to www.corn-kernel-cutter.com.

The DeckMate makes drilling holes for trailer and truck floor screws MUCH, MUCH faster and easier, but it also saves on tooling costs. Since the DeckMate works like a drill press, twist drills last many times longer compared to hand held drilling tools. Adding the Mister, a mist cooling option, adds even more life to the drill bits by reducing their temperature by a couple hundred degrees. This video is a side by side comparison -- with and without mist cooling. The mist evaporates, leaving no stain on the deck boards. Learn more at: www.cze.com/deckmate

Trailer and Truck Body manufacturers can save 2/3 of the labor required to fasten floors to the flat beds of their products with the automatic DeckMate drilling and screw driving machine. A press of a thumb button drills the holes and another press drives a standard 5/16 inch Torx head self-tapping floor screw. The DeckMate is not only faster than other methods, it is also MUCH easier on employees, leading to higher employee retention. Learn more at www.cze.com/deckmate

This is a basic demonstration of the DeckMate, first drilling holes in a simulated trailer bed and then driving 5/18 x 2 1/4" Torx head screws.