F-Series Workshop

2017-2022 Ford Super Duty (F250, F350, F450) & 2015-2020 F150 sunroof's break and won't work properly. This video shows you how to fix the most common failure of these systems. Sunroof Mechanism Set (Sun Roof Doctor): https://sunroofdoctor.3dcartstores.com/2015-2022-FORD-F1502017-2020-FORD-F250F350F450-SUNROOF-MECHANISM-SET_p_99.html Sunroof Initialization/Reprogramming: https://www.youtube.com/watch?v=FJTwBEYzBNY Sunroof Initialization Steps 1. Have door shut. 2. Turn on truck. 3. Make sure the sunroof is in the closed position 4. Push left courtesy light once (Turns On) 5. Immediately push the right courtesy light 4 times quickly (On, Off, On, Off) 6. Push left courtesy light once (Turn Off) 7. Push and hold sunroof close button until sunroof closes, then release. If the sunroof is already closed push and release. 8. Push and hold sunroof close button and hold for 15-20 seconds until the sunroof goes through the whole operation. 9. It will stop in the vented position. 10. Then push the close button until the sunroof is fully closed. 11. Push the one touch button to open. 12. Push the one touch button to close.

Installing a NAT-TV COD-F50 for my Sync 3 system. This will enable my side mount mirrors to come on with my turn signals. It also enables full use of all camera will driving at any speed. System also allows you to type in the navigation system will driving if you need to change your destination. The COD-F53 allows for addition video inputs and can be wired to your uplifter switches. I did not need the extra inputs, which is why I saved about $80 and went with the COD-F50. Also big a shoutout to the crew at NAV-TV. I got a defective unit, and they were on top of it. Immediate troubleshooting, and they overnighted me a replacement with a prepaid shipping label to return the defective unit. Awesome, stand up people. Links: NAT-TV COD-F50: https://navtv.com/products/NTV-KIT899/cod-f50.html NAT-TV COD-F53: https://navtv.com/products/NTV-KIT910/cod-f53.html

2017-2022 Ford Super Duty trucks have a known problem with the camera's in the 360 Camera system fogging up. This video shows you how to replace the camera's in your factory telescoping mirrors. SIde Mirror Camera Assembly - Ford (HC3Z-19G490-U) need 2: https://www.oempartsquick.com/oem-parts/ford-camera-hc3z19g490u Front Camera Assembly - Ford (HC3Z-19G490-Y): https://www.oempartsquick.com/oem-parts/ford-genuine-oem-ford-front-camera-assembly-hc3z19g490y Tailgate Camera Assembly - Ford (HC3Z-19G490-X): https://www.oempartsquick.com/oem-parts/ford-camera-hc3z19g490x Rear Center Cab Light Camera Assembly - Ford (HC3Z-19G490-Z): https://www.oempartsquick.com/oem-parts/ford-camera-hc3z19g490z I have the NAT-TV COD-F50 installed on my F-350. The F53 adds additional non-factory camera inputs that you can wire to your uplifters switches. I do not need the additional inputs, so I opted for the F50 kit. NAV-TV COD-F50 (Installed): https://navtv.com/products/NTV-KIT899/cod-f50.html NAV-TV COD-F53: https://navtv.com/products/NTV-KIT910/cod-f53.html Tailgate Camera Replacement: https://www.youtube.com/watch?v=KUFhLgZNMEk Front Grille Camera Replacement: https://www.youtube.com/watch?v=gbI1gnBtvZY