MPCNC P4 - Trying 3D Carving Mind Blown - Workshop 24
So what can i say as per title mind blown this machine just keeps impressing me and cant wait ti see what else it can do. hope you enjoy like and subscribe.
Gecko
https://www.thingiverse.com/thing:2863634
Owl
https://www.thingiverse.com/thing:5102967
33
views
P3 MPCNC - Cable chain- Wiring - New home and some cuts - The Workshop E23
Just finishing off the CNC and putting it in its new home. still playing and testing so did some cuts as well. More to come going to do some 3d carving next I hope. So hope you enjoy like and subscribe for more.
35
views
MPCNC Part 2 Drawing Spindle & Cutting. The Workshop E22
so doing some more drawing and then wiring and fitting the spindle and doing some test cuts from 1mm deep to 5mm deep and cutting through 17mm. Hope you enjoy hit Like or Subscribe.
25
views
P1 MPCNC Build - First part making a mostly printed CNC
So had a CNC i built years ago and decided it was time for another one so decided to go with V1 engineering's Primo CNC machine. this is just me putting the machine together and then doing its first test. Hope you enjoy.
V1 Engineering web site
https://www.v1engineering.com/
Primo 25.4 mm pipe parts from Thingiverse
https://www.thingiverse.com/thing:4493589
36
views
Home Made Marmalade - NFSCD - 03
So Oranges are ripe and time to do something with them as they are Seville oranges marmalade seems the best thing to start with. Sorry about video quality of first few minutes did not realize I have a focus issue with one of my cameras till I looked at the video. it all looked good on the camera screen ah well. so hope you enjoy the marmalade came out great and tastes really nice. hit like if you enjoy and subscribe for more.
5
views
Need a New lathe Stand - The Workshop - P20
So been using the lathe and found that the nice cabinet I made for it is well good, but not for the lathe. So need to make a new stand for the lathe as all the wood chippings build up too quick on the top, so I need something that does not do this and that’s what this video is about me making a new stand for the lathe. Hope you enjoy hit the like if you did or subscribe for more.
6
views
The Wood Oven - Part 3 - Getting There Soon Be Cooking
So slowly getting the wood oven finished, had a few wet weeks so could not do any cementing but oven now in place and just the finishing work to do and then some cooking. Hope you enjoy like or subscribe for more
3
views
The Wood Oven Part Two - Getting the area ready
So second part of putting a wood oven on the deck. This ones is mainly getting the area ready and putting in the heat bed for the oven. Hope you enjoy. Part Three coming soon. Like if you enjoy or Subscribe for more.
5
views
1
comment
Wood Oven Part One - Time to make a start on a new wood oven for the deck
So we have had a wood oven in the garden for over 12 years and well now we have moved and I have some time lets make a new one for this garden so I can get back to cooking outside. Doing this one a bit different to the last cant get any clay fire bricks so going to use expanded Perlite and cast it on a form or mold. anyway this will be spread over a few videos as quite a lot to do to put it where we want it. Hope you enjoy, Like or Subscribe.
8
views
New Boye Jointer / Thicknesser - Unbox and Test – Workshop - #15
So as I have a load of wood that I have collected and I want to use it to make stuff, but to do that I need to square and face the planks. That means I get a new workshop tool yippy. So I bought a cheap 2 in 1 jointer / planer / thicknesser. This is just me unboxing and having a try of the tool. It’s a Boye 8” (200mm) bed jointer with a thicknesser underneath. I will be making some more videos of what I am making with the wood but they are future projects. Hope you enjoy.
22
views
Got a wood lathe - Building a place for it - First go - Workshop #18
So the Boye jointer I bought lasted 2 hours and I had not done much with it, you can see this in the video. Anyway spoke to company and well I had to workout what was wrong and then pay for replacement parts and this is just a video of that. Hope you enjoy.
28
views
Workshop Re-Vamp - The Workshop - #16
So it’s winter in NZ and well it’s wet and cold, well as cold as it gets in the South Pacific :). So I decided to make some changes to the workshop so it’s better organized and I have more room also i needed to move the computers / electronics in to a dust free area. So this is a video of me doing that. Sorry for the slow uploads but new job different shifts and its taking me some time to get used to it so hopefully more videos coming soon. Hope you enjoy, hit like if you did or subscribe for more.
28
views
Boye Jointer update - It broke after 2 hours of use - fault finding / replacing parts - Workshop #17
So the Boye jointer I bought lasted 2 hours and I had not done much with it, you can see this in the video. Anyway spoke to company and well I had to workout what was wrong and then pay for replacement parts and this is just a video of that. Hope you enjoy.
20
views
New lathe tools and first go on it - workshop 19
So bought some new bits for the lathe and some carbide tipped tools. So a quick look at what arrived and testing them on the lathe and the having a go at making something. Sorry for the break in uploads but needed a break and have a new job which has shifts and that has messed up my home work balance for a while anyway back to it now so more to come. Hope you enjoy like or subscribe if you do.
1
view
Printer repairs and other stuff - the workshop - #14
So just a collection of bits I have filmed repairing the 3D printers and some time-lapse prints and a few other things. In the middle of some other projects which will be coming up soon. Watch to the end for the facehugger. Hope you enjoy, like or subscribe if you did for more.
53
views
Finishing up the front with some new drainage -- E14 -- The Garden Job
So it’s time to finish off the last jobs around the front of the property. Need some more drainage and we have and issue with our guttering, for some reason when it was installed they did not put enough down pipes on it for the length and we have had some issues with over flowing when we get heavy rain storms. So it’s time to fix that. Also we are starting to get some fruit on our new trees and I make a pie. Hope you enjoy please like or subscribe for more.
3
views
The Retaining - Part Two - E13 - The Garden Job
So the second part of the retaining , so it’s looking good but have to start other jobs before I can finish it off completely but like I said last video just keep plodding along and by the time I get to the end of the list it will be time to repair all the stuff I started first lol.
So this area will be getting a cover over half of it at some point and a deck and then a hot tub but that’s way off now so I will just carry on plodding along lol.
Hope you enjoy, hit the like if you did and subscribe for more.
8
views
The Retaining - Part One - E12 - The Garden Job
Yep I am building stuff again. This time it’s finishing off the work we started down the lower garden which was held due to 2020. So time to get the retaining finished. So we are slowly getting through our list of jobs, yes it’s a year behind now which is a bit sole destroying but hey what can you do.
So this area will be getting a cover over half of it at some point and a deck and then a hot tub but that’s way off now so I will just carry on plodding along lol.
Hope you enjoy, hit the like if you did and subscribe for more.
36
views
Finishing up the Workshop - P2 – Tool Holders – Store room – Just Finishing Off – E12 - The Workshop
So now I have some time as the deck is done I can get some more of the workshop finished off. So I am making some tool Holders finishing the store room and a look around.
35
views
Finishing up the Deck - E11 - The Garden Job
So it’s time to finish up the deck area. Just finishing up all the small bits and making it look nice. There is still other stuff to do but I have to make some stuff in the workshop first. This also means it’s time to move on to other garden jobs that desperately need doing. Hope you enjoyed hit The Rumble if you did or Subscribe to see more.
34
views
Finishing the Workshop - P1 - E11
So while working on the garden I have also been trying to finish my workshop so I can start getting some projects started for the garden and house. While doing this I realized I have way to much junk so have also had a major sort out lol I hate throwing stuff out lol. Well hope you enjoy. Hit the Rumble if you do and Subscribe for more.
22
views
DJI Mavic Air unbox and some flying
Bought a new toy, thought I would do a video and then lost all the video and a load of other video I have taken. So until I fix the issue this is what I was able to throw together. Enjoy. 1:39 Un-boxing film
6:20 Flying and quick shots
9:49 Tracking Me
10:09 Hand Flying (Jedi Mode)
10:43 Tracking Jeep down beach
12:40 Hand Landing
Thanks for watching.
Subscribe for more.
76
views
01 - The utility room make over
Now that we have had a new hot water tank installed and it has been moved I can sort out the utility room. Needs tidying, shelves and the washing machine moved so that what this video is about. Not completely finished as the floor needs changing and I need to make some more stuff to go in the room, shoe racks etc. I will apologies now for the intro as yesterday I realized that I am using the intro from the old property so thought I would make a new one and then had a complete blank and in the few hours I had this is all I came up with. So will either work more on this one or hopefully have an idea for a new one. Hope you enjoy, like if you do and subscribe to see more.
13
views
Sapphire S 3D Printer Build - Timelapse
So I bought another 3D printer. This is Two Trees Sapphire S Core XY printer. This just means the bed goes up and down and the X and Y axis move. It uses a Lerdge X Control board and the printer comes 75% built with all electronics installed etc. You just need to put the frame together and wire. This is just a time-lapse of me putting it together and showing some test prints I did to see if the settings are OK. So far really impressed with the printer but I messed with the profile I made in Simplify 3D and need to look at it as all my prints are falling now lol. So hope you enjoy Subscribe for more and hit the Like button if you enjoyed and any comments are appreciated.
81
views
Inside The Shed- Unboxing of a new Tevo Tornado 3D printer
So I have bought a new larger format 3D printer, a Tevo Tornado. Print area is huge 300 X 300 X 400 mm, well this is a huge print area for me anyway. This is just me un-boxing, building and using the printer for the first time. This is my first YouTube video with me talking so I apologize in advance lol. I am blown away with the tornado, worked out of the box, came well packaged and it has produced some really well printed large items with no issues or fails.
Tevo Site:
https://tevo3dprinterstore.com/
The items I am printing as upgrades for the Tornado can be found on Thingiverse with these links:
TEVO TORNADO KNOB LEVELING:
https://www.thingiverse.com/thing:2636745
Tevo Tornado Strain Relief:
https://www.thingiverse.com/thing:2748197
TEVO TORNADO CR10 Y MOUNT REINFORCEMENT:
https://www.thingiverse.com/thing:2734468
So hope you enjoy and like I said I apologize for the talking but there may be more videos coming with me talking away on them as there is only so much you can do with text titles.
Thumbs up if you like or down if you can’t stand it lol. Or subscribe for more and hit the bell to get a notification.
61
views