Cross Woodshop Creations

Creating a Wooden cross on my Shapeoko XXL CNC Router.

Using my Shapeoko XXL to create name plaques for the kids.

Here is a video of the 2020 Pack84 Cub Scout trophies I created. They are made from solid pine boards. I first painted them blue let it dry for a few days and then came back and carved the the trophies on the CNC machine.

Here is a v-carved Established sign created on my Shapeoko XXL. This sign is glued pine boards and is approximately 17.5 inches in diameter. Painted black with spray paint and wiped with shop cloth while still we so the wood grain shows through. and is then carved on the CNC and finally has 3 coats of lacquer sprayed onto it.

Here is multiple v-carved cross' created on my Shapeoko XXL. These cross' are from a 8inch by 6ft pine board. They are approximately 7.25 inches tall and 4 inches wide. After they were cut I proceeded to wood burn them and added my logo on the back.

Here is a video on the creation of the CWC logo. It is made from a round blank and burned and then painted.

Here is a sign i made out of Cedar on the Shapeoko XXL. It is approximately 11" high and 18" wide and 3/4" thick. I used a small metal chain that connects to the sign via small eye hooks.

3 Beautiful Cross' carved from Oak and stained with Minwax jacobean.

Creating a Travel Trailer Camping sign out of Cedar on my Shapeoko XXL CNC Router. It is approximately 11" high and 18" wide and 3/4" thick. I used a small metal chain that connects to the sign via small eye hooks.

Custom made LED sign made from 1/4" acrylic. The base was made from pine and stained black.