Junk Mechanicing

Your fuel injectors and rail should not look like this. All plugged up and a lot of trash plugging the rail.

I go through every step to replace fuel injectors on a Chevy 1500 4.8 liter. Removing all the components. Cleaning the fuel rails. Putting all the components back together and reinstalling everything on the motor. Then running to check that everything is working properly. The injectors are remand from Precision Auto Injectors! Music 1 songs Intoxicated Black Atlass Infinite (Deluxe)

The timing chain on my Chevy 350 5.7L was stretched out, so I replaced it.

Had both rear wheel cylinders was leaking. Changed them and the brake shoes on both sides. The tire that came on the truck was to big, so I added wheel spacers to keep them from rubbing.

We prepped a 5.7L motor to install in a 91 Chevy 3500 one ton flatbed truck. I changed the oil pump, and the timing chain before installing.

We pulled the 5.7L out of my 1993 Chevy 1500 pickup truck, to put it in my 1991 Chevy one ton 3500. https://youtu.be/rlRNUrInZ_w?si=EvcqPbWTbLxPwGAl

We pulled the 5.7L out of my 1993 Chevy 1500 pickup truck, to put it in my 1991 Chevy one ton 3500.

My 16-foot car hauler's axle got bent and blew out both wheel bearings on the one side. No saving it, so I changed the axle.

We diagnose a lack of fuel on our 2001 chevy truck. Finding the problem was the fuel pump. We set out to fix it. You will see how to disconnect the fuel tank and remove the old pump. Reinstall a new one and put the fuel tank back in the truck with minimal tools. Music 1 songs The Colonel Zachariah Hickman The Colonel

A ball joint broke on my son's Mercury. I bought a ball joint pressing tool. This tool press allows you to press out the old ones and press in the new ball joints while the control arms remain on the car. Saving a lot of time and hard work.