1S 3.7V 4.2v 18650 Battery Holder Case mount PCB Storage 1 cell holder
Whatsapp:+923176979742
It can be excessively pass large current and has a long service life. Suitable for recycling
PS: The battery box has no wires. It has pins (chip pins), which can be directly plugged into the circuit board for welding.
Adopt ABS material. The materials used meet the national environmental protection standards.
it will form 3.7V or 4.2V when battery is fully charged
High quality battery holder case for easy soldering and connecting.
Battery Type: 1x 3.7V 18650 battery;Material: Durable plastic and metal.
Metallic spring with pin design for easy install and convenient for electric circuit DIY work.
Package includes: 1 slot 18650 battery case.
5
views
Polyolefin 7mm milky white Hot Glue Stick Adhesive Rods 150c high temperature
Anti-Flaming Grade: 94V-0
Softening Point: 148±10°C
Main Materials: Polyolefin
Viscosity: 15000±1500 cps @180°C
Breakdown voltage: >50KV
Length: 300mm
Good viscosity, quick glue, curing time is short.
- No toxic, easy to operate, continuous use without carbonization phenomenon.
- Fast bonding, high strength, anti-aging, good thermal stability, high toughness film.
Application:
- 1.Toys, small jewelry, handicrafts, hair clips, etc.
- 2.Sugar box, carton packaging;
- 3.Small box sealing, packing;
- 4.Handbags, leather goods, purses;
- 5.Small appliances, wires, connectors, connectors;
- 6.Speaker, frame, logo label;
- 7.Hardware fixed;
- 8.Small paper products are bonded and fixed;
- 9.Electronic products fixed, bonding, insulation;
- 10.Computer embroidery, zipper manufacturing, clothing accessories non-woven products such as bonding.
7
views
5x20 Fuse Holder Case with 22AWG Wire Cable in line
Whatsapp:+923176979742
Features:
in-line screw type
With 22AWG Wire
Rated Temperture : 105C
Rated Voltage : 600V
Length : 20cm (8 inch)(approx.)
maximum electrical rating: 6A
electric bicycle throttle handle switches scooter tricycle EVfitting 2 speed
Whatsapp:+923176979742
Reverse & Driver
Mount hole size: 22mm
handle length 140mm Total length 150mm
2 output ports
Only Right side throttle with switch
3
views
electric bicycle throtle handle switches scooter tricycle EV fitting 3 speed
Whatsapp:+923176979742
Switches
3 speed
Reverse & Driver
Mount hole size: 22mm
handle length 140mm Total length 150mm
3 output ports
3
views
10x15cm double Side PCB Copper Clad Laminate Board Fr4 for DIY 1.6mm thick
Whatsapp:+923176979742
Specification:
Panel size: Approx. 150 x 100mm or 5.90 x 3.93 inch
Thickness: 0.06" ±0.005 (1.6mm ± 0.16)
Weight: Approx. 38g each
Layers: double Side
Panel: FR4
Operating temperature: Up to 140 °C or 285°F
Description:
This double sided PCB Copper Clad Laminate Board is made of copper foil by the hot-pressing technology.
Super-fine steel-wool, Restore4, Tarn-X, roscherite, Zap or similar before using.
After that be sure to rinse and dry so without any water spots.
Combined resin with reinforced material.
As basic material of PCB production.
Package included:
1 x double Sided Copper Clad Laminate
3
views
18650 Universal 1 slot Battery USB Charger adapter Rechargeable Batteries Li-ion
Whatsapp:+923176979742
Product name: 18650 charger-single slot independent charging
Product model: BH-042100-02U with wire
Functional characteristics: single-slot independent charging
Power supply mode: conventional USB power supply
Input mode: DC 5V 1A-2A
Output mode: DC 4.2V 1000mA
Product size: 10*22*27mm
Product certification: EU CE/EMC certification, US FCC certification
Product function:
The charger adopts the universal Android charging interface for input charging. It can directly output 5V power through the mobile phone charging station, power bank, car USB, and charge, connect to the power source, the indicator light is green, and the red light is on when charging, and the charging is full. Green light. The charger adopts intelligent charging management IC to control, and the charging voltage reaches 4.23V to automatically stop charging, which can not cause the battery to overcharge.
1
view
250mm nylon cable tie zip tie white self locking
Whatsapp:+923176979742
length: 250mm
width: 4mm
1.For indor and outdoor use
2.Working temperature:-40°C-85°C.
3.Material:Nylon 66. 94V-2
4.One-piece construction for consistent performance and reliability Lowest threading force of any one-piece cable tie in the industry Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation.
5.Specification:UL approved material ,Heat resistant,
Application
the strength of the binding strength is widely used in various fields (petrochemical, bridges, pipelines, cable tray, traffic facilities, billboards, electric power facilities, etc.).
1
view
6F22 9V Battery Multimeter Microphone Toy Remote gallon type battery
Whatsapp:+923176979742
Designed for professionals
Delivering long-lasting power across a range of professional applications.
Features
- 0% mercury, friendly to the environment.
- This is a high quality 9V super cell, super heavy duty battery.
- safety & reliable battery that you can trust.
- Up to 5 years estimated shelf life at room temperature.
- Ideal for use with all household and electronic appliances.
- Excellent performance far exceed industry standard and specification.
- It can provide you value and dependable power.
- It has a large full charge yield and a very flat discharge curve.
Specification
N.W.: 38 g
G.W.: 44 g
1
view
Fr-4 Copper Clad Single Side PCB Laminate 7x10cm Board
Specification:
Panel size: Approx. 150 x 100mm or 5.90 x 3.93 inch
Thickness: 0.06" ±0.005 (1.5mm ± 0.15)
Weight: Approx. 38g each
Layers: double Side
Panel: FR4
Operating temperature: Up to 140 °C or 285°F
Description:
This single side PCB Copper Clad Laminate Board is made of copper foil by the hot-pressing technology.
Super-fine steel-wool, Restore4, Tarn-X, roscherite, Zap or similar before using.
After that be sure to rinse and dry so without any water spots.
Combined resin with reinforced material.
As basic material of PCB production.
Package included:
1 x single Side Copper Clad Laminate
7
views
24V 250W Electric Bike Conversion kit Scooter Motor Controller Kit For 20-28inch Ordinary Bike Kit
This product can be used to convert bicycles into electric vehicles.
Material, durable and easy to operate.
This kit is suitable for installation on regular bicycles of 22-28 inches.
This kit is not suitable for modification in special models and variable speed models.
Product DIY Assembly Process
DAY 1 - https://youtu.be/DwH2KfuXUQY
DAY 2 - https://youtu.be/rdLAlQlATiA
DAY 3 - https://youtu.be/SqVAivrPE10
Specification:
Name: Electric Bike Conversion Kit
Fit For: 20-28 inch ordinary bicycle
Rated Voltage: 24V
Rated Power: 250W
Flywheel Teeth: 16
Rated Speed: 3300 rpm
Reduction Ratio: 9.78
Note:
Without charger and battery case!!!
Due to the manual measurement,there might be some error.
Package Included:
1 X Motor
1 X Controller
1 X Motor Bracket
1 X Light
1 X Chain
1 X Electric Door Lock
1 X Flywheel
1 X Extended Shaft
2 X Connector
1 X Charging Interface
2 X Speed Control Switch
2 X Handle
5 X Plastic Insert
10 X Copper Plug
2 X Steel Plate
4 X Screws
4 X Ring
35
views